Artificial Lifting Technology Applied in Ultra-Deep  Super-Heavy Oil Reservoirs of the Tahe Oilfield

PENG Zhenhua; ZHANG Yuan; DING Wen; REN Xianghai; LI Xiaojun; XIONG Wei

doi:10.11911/syztjs.2018094

Volume 46 Issue 4

Jul. 2018

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2018 > 46(4): 84-90. > DOI: 10.11911/syztjs.2018094

PENG Zhenhua, ZHANG Yuan, DING Wen, REN Xianghai, LI Xiaojun, XIONG Wei. Artificial Lifting Technology Applied in Ultra-Deep Super-Heavy Oil Reservoirs of the Tahe Oilfield[J]. Petroleum Drilling Techniques, 2018, 46(4): 84-90. DOI: 10.11911/syztjs.2018094

Citation:

PDF (1032 KB)

Artificial Lifting Technology Applied in Ultra-Deep Super-Heavy Oil Reservoirs of the Tahe Oilfield

1.
Research Institute of Petroleum Engineering, Sinopec Northwest Oilfield Company, Urumqi, Xinjiang, 830011, China;
2.
Oil and Gas Engineering Institute of PetroChina Jilin Oilfield Company, Songyuan, Jilin, 138000, China

More Information

Received Date: January 29, 2018

Graphical Abstract

Abstract

Abstract

The ultra-deep and ultra-heavy oil reservoirs of the Tahe Oilfield often experience problems with artificial lift.Specifically,they face insufficient deep sucking,frequent string fractures,high costs in heavy oil diluting and thinning in wellbore,and a high failure rate with the down-hole pump.These problems are complicated by the nature of the reservoirs,referred to as "two ultras and five highs".In order to overcome the problems,relevant techniques were developed.They included a large belt driving pumping unit,large displacement pump,load reducing and deep pumping technology and a high-temperature and heavy-oil tolerant electrical pump,forming technologies like light oil mixing gas lifting,heavy oil composite lifting,and heavy oil screw pump lifting.In addition,we proposed corresponding measures to overcome the main challenges encountered in reservoir development.In the end,we used our findings to improve efficiency to contribute to the successful for efficient and economic development of reservoirs in the Tahe Oilfield.
- fractured-vuggy reservoir,
- carbonate,
- super heavy oil,
- ultra-deep well,
- lifting technology,
- Tahe Oilfield

FullText(HTML)

References (23)

References

[1]	张希明,朱建国,李宗宇,等.塔河油田碳酸盐岩缝洞型油气藏的特征及缝洞单元划分[J].海相油气地质,2007,12(1):21-24. ZHANG Ximing,ZHU Jianguo,LI Zongyu,et al.Ordovician carbonate fractured-vuggy reservoir in Tahe Oilfield,Tarim Basin:characteristics and subdivision of fracture-vug units[J].Marine Origin Petroleum Geology,2007,12(1):21-24.
[2]	万仁溥.采油工程手册[M].北京:石油工业出版社,2000:112-115. WAN Renpu.Production engineering handbook[M].Beijing:Petroleum Industry Press,2000:112-115.
[3]	刘玉国,杜林辉,梁志艳,等.83/44侧向进油大排量抽稠泵的研制与应用[J].中外能源,2014,19(9):61-63. LIU Yuguo,DU Linhui,LIANG Zhiyan,et al.Development and application of 83/44 lateral inlet heavy oil pump with large displacement[J].Sino-Global Energy,2014,19(9):61-63.
[4]	杜林辉,梁志艳,蒋磊,等.稠油机采井泵深与掺稀混配点分离设计及应用[J].特种油气藏,2014,21(3):145-147. DU Linhui,LIANG Zhiyan,JIANG Lei,et al.Separate design between pump setting depth and mixing point for diluent oil blending in heavy oil mechanical producers and its application[J].Special Oil Gas Reservoirs,2014,21(3):145-147.
[5]	张荣军,李海军,任月玲.塔河油田深层稠油掺稀降黏技术[J].西安石油大学学报(自然科学版),2009,24(3):84-87. ZHANG Rongjun,LI Haijun,REN Yueling.Viscosity reducing recovery technology of the deep heavy oil of Tahe Oilfield by mixing light oil[J].Journal of Xi’an Shiyou University (Natural Science Edition),2009,24(3):84-87.
[6]	杨顺辉,娄新春,张素红.塔河油田超深井稠油采油工艺评价与优选[J].石油地质与工程,2006,20(5):65-67. YANG Shunhui,LOU Xinchun,ZHANG Suhong.Evaluation and well selection of over-deep well heavy oil production technology in Tahe Oilfield[J].Petroleum Geology and Engineering,2006,20(5):65-67.
[7]	陈灿,陈凤,张耀,等.抽油机减载器在塔河油田的应用及改进[J].油气藏评价与开发,2013,3(3):54-57. CHEN Can,CHEN Feng,ZHANG Yao,et al.Application and improvement of load shedding devices in Tahe Oilfield[J].Reservoir Evaluation and Development,2013,3(3):54-57.
[8]	赵海洋,王金东,于振东.加装减载器的抽油系统杆柱设计及节能分析[J].科学技术与工程,2009,9(14):4143-4145. ZHAO Haiyang,WANG Jindong,YU Zhendong.Sucker rod design and energy conservation analysis of pumping system with load reducer[J].Science Technology and Engineering,2009,9(14):4143-4145.
[9]	邱军,宫恒心,王玉,等.有杆泵深抽减载技术在TZ4-7-52井的应用[J].油气井测试,2002,11(3):49-50. QIU Jun,GONG Hengxin,WANG Yu,et al.Application of deloader system at deep sucker rod pump in Well TZ4-7-52[J].Well Testing,2002,11(3):49-50.
[10]	吴频,周海,刘洋,等.深井稠油潜油电泵[J].石油科技论坛,2012,31(4):70-72. WU Pin,ZHOU Hai,LIU Yang,et al.Submersible electric pump for deep and heavy oil well[J].Oil Forum,2012,31(4):70-72.
[11]	杜林辉,刘玉国,刘瑞,等.超稠油潜油电泵尾管装置的研制与应用[J].石油钻采工艺,2013,35(4):103-105. DU Linhui,LIU Yuguo,LIU Rui,et al.Development and application of the tail pipe device for ultra-heavy oil submersible pump[J].Oil Drilling Production Technology,2013,35(4):103-105.
[12]	杨亚东,杨兆中,甘振维,等.掺稀采油在塔河油田的应用研究[J].西南石油学院学报,2006,28(6):53-55,66. YANG Yadong,YANG Zhaozhong,GAN Zhenwei,et al.Study and application of blending light oil recovery technique in Tahe Oil-Field[J].Journal of Southwest Petroleum Institute,2006,28(6):53-55,66.
[13]	明亮,敬加强,代科敏,等.塔河稠油掺稀粘度预测模型[J].油气储运,2013,32(3):263-266,269. MING Liang,JING Jiaqiang,DAI Kemin,et al.Prediction model for viscosity of Tahe Heavy Oil mixed with light oil[J].Oil Gas Storage and Transportation,2013,32(3):263-266,269.
[14]	李京瑞,颜廷俊,张白茹.叶轮开孔对高效气液混合器性能的影响[J].石油机械,2017,45(8):76-81. LI Jingrui,YAN Tingjun,ZHANG Bairu.Effect of impeller opening on the performance of high efficiency gas-liquid mixer[J].China Petroleum Machinery,2017,45(8):76-81.
[15]	刘延鑫,王旱祥,汪润涛,等.电动潜油离心泵叶轮冲蚀磨损研究[J].中国石油大学学报(自然科学版),2017,41(4):155-159. LIU Yanxin,WANG Hanxiang,WANG Runtao,et al.Study on erosive wear of electric submersible pump’s impeller[J].Journal of China University of Petroleum(Edition of Natural Science),2017,41(4):155-159.
[16]	林日亿,李兆敏,王景瑞,等.塔河油田超深井井筒掺稀降粘技术研究[J].石油学报,2006,27(3):115-119. LIN Riyi,LI Zhaomin,WANG Jingrui,et al.Technology of blending diluting oil in ultra-deep wellbore of Tahe Oilfield[J].Acta Petrolei Sinica,2006,27(3):115-119.
[17]	赵海洋,王世杰,李柏林.塔河油田井筒降粘技术分析与评价[J].石油钻探技术,2007,35(3):82-84. ZHAO Haiyang,WANG Shijie,LI Bolin.Analysis and evaluation of viscosity reducing techniques for wellbore in Tahe Oilfield[J].Petroleum Drilling Techniques,2007,35(3):82-84.
[18]	陈德春,李昂,高莉,等.潜油电泵井油套环空泵上掺稀油井筒流体温度模型[J].新疆石油地质,2013,34(5):591-594. CHEN Dechun,LI Ang,GAO Li,et al.Wellbore fluid temperature model for blending light hydrocarbon above pump in tubing-casing annular space in ESP wells[J].Xinjiang Petroleum Geology,2013,34(5):591-594.
[19]	魏秦文,张茂,郭咏梅.潜油电机驱动采油技术的发展[J].石油矿场机械,2007,36(7):1-7. WEI Qinwen,ZHANG Mao,GUO Yongmei.The development of electric submergible motor actuation oil recovery technology[J].Oil Field Equipment,2007,36(7):1-7.
[20]	张文生,郑晓志,杨顺辉.塔河油田6区特稠油举升方式适应性分析及配套工艺[J].石油钻探技术,2003,31(4):62-63. ZHANG Wensheng,ZHENG Xiaozhi,YANG Shunhui.The analysis of adaptability and supporting techniques of artificial lift for thickened oil of No.6 Block in Tahe Oilfield[J].Petroleum Drilling Techniques,2003,31(4):62-63.
[21]	邹国君.塔河油田超深超稠油藏采油新技术研究[J].西南石油大学学报(自然科学版),2008,30(4):130-134. ZOU Guojun.New recovery technology of super-deep and super-heavy oil reservoir development of Tahe Oilfield[J].Journal of Southwest Petroleum University (Science Technology Edition),2008,30(4):130-134.
[22]	陈艳玲,王元庆,逯江毅.稠油水热裂解催化降黏研究的进展[J].地质科技情报,2008,27(6):53-57. CHEN Yanling,WANG Yuanqing,LU Jiangyi.Advance on the catalytic aquathermolysis of heavy oil[J].Geological Science and Technology Information,2008,27(6):53-57.
[23]	范洪富,刘永建,赵晓非,等.金属盐对辽河超稠油水热裂解反应影响研究[J].燃料化学学报,2001,29(5):430-433. FAN Hongfu,LIU Yongjian,ZHAO Xiaofei,et al.Studies on effect of metal ions on aquathermolysis reaction of Liaohe heavy oils under steam treatment[J].Journal of Fuel Chemistry and Technology,2001,29(5):430-433.

[1]	SUN Huan, ZHU Mingming, YANG Yongping, WANG Weiliang, WANG Kai, ZHAO Xiangyang. Comprehensive Leakage Control Technology for Shale Gas Wells in Western Margin Thrust Zone of Ordos Basin[J]. Petroleum Drilling Techniques, 2025, 53(1): 49-54. DOI: 10.11911/syztjs.2024117
[2]	JIN Taiyu. Study on Three-Dimensional Fluid-Solid Coupling Model of Drilling Fluid Leakage in Rough Fracture Network[J]. Petroleum Drilling Techniques, 2024, 52(1): 69-77. DOI: 10.11911/syztjs.2023100
[3]	ZHU Mingming, SUN Huan, SUN Yan, CONG Cheng, SHI Deyi, JIA Jiguo. Loss Circulation Control Technology for Malignant Water Leakage Layer in Longdong Tight Oil Region[J]. Petroleum Drilling Techniques, 2023, 51(6): 50-56. DOI: 10.11911/syztjs.2023003
[4]	HUO Hongbo, LIU Dongdong, TAO Lin, WANG Deying, SONG Chuang, HE Shiming. Integrity Challenges and Countermeasures of the Offshore CCUS Based on CO₂-EOR[J]. Petroleum Drilling Techniques, 2023, 51(2): 74-80. DOI: 10.11911/syztjs.2023009
[5]	ZHANG Xiaocheng, HUO Hongbo, LIN Jiayu, LIU Hailong, LI Jin. Integrated Geology-Engineering Early Warning Technologies for Lost Circulation of Fractured Reservoirs in Bohai Oilfield[J]. Petroleum Drilling Techniques, 2022, 50(6): 72-77. DOI: 10.11911/syztjs.2022025
[6]	WU Junxia, YI Weikai, SUN Peng, LIU Huanle. Integrity Assurance Technologies for Plugged Wells in Wen 23 Gas Storage[J]. Petroleum Drilling Techniques, 2022, 50(5): 57-62. DOI: 10.11911/syztjs.2022027
[7]	WANG Jianyun, ZHANG Hongwei, ZOU Shuqiang, LI Mingjun, WANG Peng. Foamed Cement Slurry Cementing Technology for Low-Pressure and Leakage-ProneLayers of the Shunbei Oil & Gas Field[J]. Petroleum Drilling Techniques, 2022, 50(4): 25-30. DOI: 10.11911/syztjs.2022075
[8]	KANG Yili, TIAN Guofeng, YOU Lijun, YAN Xiaopeng, XU Chengyuan. Friction & Sliding on Fracture Surfaces: A New Mechanism for Increasing Drilling Fluid Leakage in Deep Fractured Reservoirs[J]. Petroleum Drilling Techniques, 2022, 50(1): 45-53. DOI: 10.11911/syztjs.2021033
[9]	ZHANG Yu. Application of Direct-Push Storage Logging Technology in the Northwest Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(1): 121-126. DOI: 10.11911/syztjs.2021018
[10]	JIA Lichun, CHEN Mian, TAN Qingming, SUN Zhen, WU Siyue. Key Factors for Inhibiting Fracture Propagation during Leakage Control under Pressure[J]. Petroleum Drilling Techniques, 2016, 44(1): 49-56. DOI: 10.11911/syztjs.201601010

Cited By

Cited by

Periodical cited type(19)

1.	王川，陈秋帆，夏勇. 海底泥浆举升钻井系统钻遇天然气水合物时的动态风险分析. 安全与环境学报. 2024(02): 479-487 .
2.	翟诚，吴迪，秦冬冬. 天然气水合物注热分解诱发储层变形破坏的正交数值模拟研究. 特种油气藏. 2024(02): 112-119 .
3.	刘芳，冯馨，孙皓宇，张旭辉. 水合物分解中深水基础抗拔性能模型试验研究. 防灾减灾工程学报. 2023(02): 359-365 .
4.	贺保卫，马志宇，崔海朋，杜鹏. 基于Unity 3D的可燃冰开采环境监测模拟系统设计. 计算机应用与软件. 2023(08): 121-125+154 .
5.	吴艳辉，代锐，张磊，朱志潜，高禹，刘楷，徐鹏，张雨. 深水井筒海水聚合物钻井液水合物生成抑制与堵塞物处理方法. 钻井液与完井液. 2023(04): 415-422 .
6.	赵凯，李润森，冯永存，高伟，张振伟，窦亮彬，毕刚. 非均匀地应力场下水合物储层水平井井周塑性区分布. 中南大学学报(自然科学版). 2022(03): 952-962 .
7.	王磊，杨进，李莅临，胡志强，柯珂，臧艳彬，孙挺. 深水含水合物地层钻井井口稳定性研究. 岩土工程学报. 2022(12): 2312-2318 .
8.	王志刚，李小洋，张永彬，尹浩，胡晨，梁金强，黄伟. 海域非成岩天然气水合物储层改造方法分析. 钻探工程. 2021(06): 32-38 .
9.	马永乐，张勇，刘晓栋，侯岳，杨金龙，宋本岭，刘涛，李荔. 海域天然气水合物低温抑制性钻井液体系. 钻井液与完井液. 2021(05): 544-551+559 .
10.	王偲，谢文卫，张伟，陈靓，陈浩文. RMR技术在海域天然气水合物钻探中的适应性分析. 探矿工程(岩土钻掘工程). 2020(02): 17-23 .
11.	史静怡，樊建春，武胜男，李磊. 深水井筒天然气水合物形成预测及风险评价. 油气储运. 2020(09): 988-996 .
12.	李莅临，杨进，路保平，柯珂，王磊，陈柯锦. 深水水合物试采过程中地层沉降及井口稳定性研究. 石油钻探技术. 2020(05): 61-68 . 本站查看
13.	李子丰，韩杰. 海底天然气水合物开采的环境安全性探讨. 石油钻探技术. 2019(03): 127-132 . 本站查看
14.	李庆超，程远方，邵长春. 允许适度坍塌的水合物储层最低钻井液密度. 断块油气田. 2019(05): 657-661 .
15.	牛洪波，于政廉，孙菁，徐加放. 天然气水合物动力学抑制剂与水分子相互作用研究. 石油钻探技术. 2019(04): 29-34 . 本站查看
16.	迟咏梅，徐松杰，曹玉廷，董坚. 新型两亲性聚酰胺的合成及性质. 应用化学. 2017(03): 269-275 .
17.	庞维新，李清平，程艳，王炳明. 水合物堵塞治理工具和方法研究. 石油机械. 2016(03): 68-72 .
18.	光新军，王敏生. 海洋天然气水合物试采关键技术. 石油钻探技术. 2016(05): 45-51 . 本站查看
19.	孙小辉，孙宝江，王志远，王金堂. 超临界CO_2钻井井筒水合物形成区域预测. 石油钻探技术. 2015(06): 13-19 . 本站查看

Other cited types(13)

Get Citation

PDF

XML

Article Metrics

Article views PDF downloads Cited by(32)

Artificial Lifting Technology Applied in Ultra-Deep Super-Heavy Oil Reservoirs of the Tahe Oilfield

Abstract

References

Related Articles

Cited by

Periodical cited type(19)

Other cited types(13)

Catalog

Article Metrics

Related

Artificial Lifting Technology Applied in Ultra-Deep Super-Heavy Oil Reservoirs of the Tahe Oilfield

Abstract

References

Related Articles

Cited by

Periodical cited type(19)

Other cited types(13)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content