The Rock Breaking Mechanism of the Compound Percussive-Rotary Drilling Method with a PDC Bit

ZHA Chunqing; LIU Gonghui; LI Jun; LI Yumei; XI Yan

doi:10.11911/syztjs.201702004

Volume 45 Issue 2

Mar. 2017

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2017 > 45(2): 20-24. > DOI: 10.11911/syztjs.201702004

ZHA Chunqing, LIU Gonghui, LI Jun, LI Yumei, XI Yan. The Rock Breaking Mechanism of the Compound Percussive-Rotary Drilling Method with a PDC Bit[J]. Petroleum Drilling Techniques, 2017, 45(2): 20-24. DOI: 10.11911/syztjs.201702004

Citation:

PDF (1090 KB)

The Rock Breaking Mechanism of the Compound Percussive-Rotary Drilling Method with a PDC Bit

1.
College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing, 102249, China;
2.
Beijing University of Technology, Beijing, 100124, China

More Information

Received Date: June 16, 2016
Revised Date: January 13, 2017

Graphical Abstract

Abstract

Abstract

To provide satisfactory solutions to the low rate of penetration (ROP) and pre-mature failure of the PDC bits caused by stick-slip vibration while drilling through hard formations, an innovative compound percussive-rotary drilling technique with a PDC bit was proposed in this paper and the rock-breaking mechanisms of the technique were reviewed. By using the torsion models for one-way axial percussions and compound percussion of PDC bits, patterns of movements of such PDC bits were analyzed. In addition, ABAQUS was used to simulate shearing forces on rocks during one-way axial percussion and compound percussion. Research results showed that PDC bits under one-way axial percussion may have significantly enhanced the cutting depths of the teeth. At the same time, PDC bits may experience torsional vibration during the process, and compound percussion could significantly enhance shearing performances of PDC bits on formation rocks by reducing resistance torques. In this way, torsional vibration of PDC bits induced by one-way axial percussions could be reduced dramatically. In conclusion, compound percussion drilling techniques with PDC bits can effectively enhance ROP in drilling through hard formations by enhancing cutting depths and reducing torsional vibration.
- hard formation,
- compound percussion,
- torsional vibration,
- rate of penetration (ROP)

FullText(HTML)

References (17)

References

[1]	HERNANDEZ-SUAREZ R,PUEBLA H,AGUILAR-LOPEZ R,et al.An integral high-order sliding mode control approach for stick-slip[J].Petroleum Science and Technology,2009,27(8):788-800.
[2]	DEPOUHON A,DETOURNAY E.Instability regimes and self-excited vibrations in deep drilling systems[J].Journal of Sound and Vibration,2014,333(7):2019-2039.
[3]	KYLLINGSTAD A,HALSEY G W.A study of slip/stick motion of the bit[J].SPE Drilling Engineering,1988,3(4):369-373.
[4]	TUCKER W R,WANG C.On the effective control of torsional vibrations in drilling systems[J].Journal of Sound and Vibration,1999,224(1):101-122.
[5]	周祥林,张金成,张东清.TorkBuster扭力冲击器在元坝地区的试验应用[J].钻采工艺,2012,35(2):15-17. ZHOU Xianglin,ZHANG Jincheng,ZHANG Dongqing.Experimental application of TorkBuster torsional impactor in Yuanba Region[J].Drilling Production Technology,2012,35(2):15-17.
[6]	吕晓平,李国兴,王震宇,等.扭力冲击器在鸭深1井志留系地层的试验应用[J].石油钻采工艺,2012,34(2):99-101. LYU Xiaoping,LI Guoxing,WANG Zhenyu,et al.Experiment of torkbuster on Well YS1 in Silurian Formation[J].Oil Drilling Production Technology,2012,34(2):99-101.
[7]	RABIA H.A unified prediction model for percussive and rotary drilling[J].Mining Science and Technology,1985,2(3):207-216.
[8]	李瑞营,王峰,陈绍云,等.大庆深层钻井提速技术[J].石油钻探技术,2015,43(1):38-43. LI Ruiying,WANG Feng,CHEN Shaoyun,et al.ROP improvement in deep formations in the Daqing Oilfield[J].Petroleum Drilling Techniques,2015,43(1):38-43.
[9]	王海涛,张伟,王国斌,等.自激振荡式冲击钻井工具在吉木萨尔地区的应用[J].断块油气田,2014,21(4):530-532. WANG Haitao,ZHANG Wei,WANG Guobin,et al.Application of self-oscillating impact drilling tool in Jimsar Area[J].Fault-Block Oil Gas Field,2014,21(4):530-532.
[10]	柳贡慧,李玉梅,李军,等.复合冲击破岩钻井新技术[J].石油钻探技术,2016,44(5):10-15. LIU Gonghui,LI Yumei,LI Jun,et al.New technology with composite percussion drilling and rock breaking[J].Petroleum Drilling Techniques,2016,44(5):10-15.
[11]	罗生梅,张宏林,斯建刚,等.冲击凿岩的瞬态动力学及效率分析[J].兰州理工大学学报,2009,35(4):39-42. LUO Shengmei,ZHANG Honglin,SI Jiangang,et al.Transient dynamics of impact rock drilling and its efficiency analysis[J].Journal of Lanzhou University of Technology,2009,35(4):39-42.
[12]	赵伏军,李夕兵,冯涛,等.动静载荷耦合作用下岩石破碎理论分析及试验研究[J].岩石力学与工程学报,2005,24(8): 1315- 1320. ZHAO Fujun,LI Xibing,FENG Tao,et al.Theoretical analysis and experiments of rock fragmentation under coupling dynamic and static loads[J].Chinese Journal of Rock Mechanics and Engineering,2005,24(8):1315-1320.
[13]	邓勇,陈勉,金衍,等.冲击作用下岩石裂纹长度预测模型及数值模拟研究[J].石油钻探技术,2016,44(4):41-46. DENG Yong,CHEN Mian,JIN Yan,et al.Prediction model and numerical simulation for rock fissure length under impact load[J].Petroleum Drilling Techniques,2016,44(4):41-46.
[14]	陈腾飞,许金余,刘石,等.岩石在冲击压缩破坏过程中的能量演化分析[J].地下空间与工程学报,2013,9(增刊1):1477-1482. CHEN Tengfei,XU Jinyu,LIU Shi,et al.Research on rock energy evolution in the process of impact compression failure[J].Chinese Journal of Underground Space and Engineering,2013,9(supplement 1):1477-1482.
[15]	玄令超,管志川,呼怀刚,等.旋转冲击破岩实验装置的设计与应用[J].石油钻采工艺,2016,38(1):48-52. XUAN Lingchao,GUAN Zhichuan,HU Huaigang,et al.Design and application of experimental apparatus for rock breaking by rotary percussion[J].Oil Drilling Production Technology,2016,38(1):48-52.
[16]	KAHRAMAN S.Rotary and percussive drilling prediction using regression analysis[J].International Journal of Rock Mechanics and Mining Sciences,1999,36(7):981-989.
[17]	BATAKO A D,BABITSKY V I,HALLIWELL N A.A self-excited system for percussive-rotary drilling[J].Journal of Sound and Vibration,2003,259(1):97-118.

[1]	ZHANG Heng, YUAN Guangjie, NI Hongjian, YANG Henglin, FU Li, WANG Yuan. Experimental Study on the Suppression of Stick-Slip Vibration of PDC Bits during Rock Breaking by Composite Impact Load[J]. Petroleum Drilling Techniques. DOI: 10.11911/syztjs.2025007
[2]	LIU Shubin, NI Hongjian, ZHANG Heng. Development and Applications of a Compound Axial and Torsional Impact Drilling Tool[J]. Petroleum Drilling Techniques, 2020, 48(5): 69-76. DOI: 10.11911/syztjs.2020072
[3]	LUO Hengrong, CUI Xiaojie, TAN Yong, LI Youyan, ZHAO Jianjun. Research and Field Test on Drilling Acceleration Technology with Hydraulic Torsional Impactor Combined with Hydraulic Boosters[J]. Petroleum Drilling Techniques, 2020, 48(3): 58-62. DOI: 10.11911/syztjs.2020037
[4]	HUANG Jiagen, WANG Haige, JI Guodong, ZHAO Fei, MING Ruiqing, HAO Yalong. The Rock Breaking Mechanism of Ultrasonic High Frequency Rotary-Percussive Drilling Technology[J]. Petroleum Drilling Techniques, 2018, 46(4): 23-29. DOI: 10.11911/syztjs.2018097
[5]	LIN Siyuan, LI Zhong, HUANG Yi, CHEN Haodong, YANG Yuhao, GAO Jiji. Technique for Enhancing the Rate of Penetration through the Application of a New PDC Bit with Rotary Cutters in Deep Formations in the Wenchang Block[J]. Petroleum Drilling Techniques, 2017, 45(6): 65-69. DOI: 10.11911/syztjs.201706012
[6]	YAN Yan, GUAN Zhichuan, XUAN Lingchao, HU Huaigang, ZHUANG Li. Experimental Study on Rock Breaking Efficiency with a PDC Bit under Conditions of Composite Percussion[J]. Petroleum Drilling Techniques, 2017, 45(6): 24-30. DOI: 10.11911/syztjs.201706005
[7]	ZHA Chunqing, LIU Gonghui, LI Jun, LI Yumei, XI Yan, LIAN Wei. Development and Field Application of a Compound Percussive Jet[J]. Petroleum Drilling Techniques, 2017, 45(1): 57-61. DOI: 10.11911/syztjs.201701010
[8]	LIU Gonghui, LI Yumei, LI Jun, ZHA Chunqing, ZHANG Tao, HUO Mingming. New Technology with Composite Percussion Drilling and Rock Breaking[J]. Petroleum Drilling Techniques, 2016, 44(5): 10-15. DOI: 10.11911/syztjs.201605002
[9]	Li Wei, Yan Tie, Zhang Zhichao, Li Lianqun. Rock Response Mechanism and Rock Breaking Test Analysis for Impact of High Frequency Vibration Drilling Tool[J]. Petroleum Drilling Techniques, 2013, 41(6): 25-28. DOI: 10.3969/j.issn.1001-0890.2013.06.005
[10]	Effect of Drilling Fluid Inorganic Salt on Rate of Penetration[J]. Petroleum Drilling Techniques, 2011, 39(4): 48-52. DOI: 10.3969/j.issn.1001-0890.2011.04.010

Cited By

Cited by

Periodical cited type(35)

1.	李根生，穆总结，田守嶒，黄中伟，孙照伟. 冲击破岩钻井提速技术研究现状与发展建议. 新疆石油天然气. 2024(01): 1-12 .
2.	曹继飞，邹德永，李成，王旱祥，车家琪，张伟强，黄哲. 基于仿真的复合冲击破岩流固热耦合场分析. 石油机械. 2024(08): 61-69 .
3.	柴龙顺，魏波，赵金成，陈杰，李胜伟，陈立伟. 近钻头提速工具在渤海油田垦利区块某井作业分析. 中国石油和化工标准与质量. 2023(06): 141-142+148 .
4.	刘伟，许朝辉，查春青，李牧. 复合冲击破岩数值模拟研究及现场应用. 石化技术. 2023(02): 82-84+87 .
5.	席岩，王皓宇，齐悦，田玉栋，李军，汪伟. 复合冲击相位差对破岩效率影响数值模拟研究. 石油机械. 2023(03): 40-48 .
6.	刘伟，席岩，查春青，郭庆丰，许朝辉，汪伟. 不同冲击钻井方式PDC切削齿侵彻深度及破岩机制研究. 新疆石油天然气. 2023(02): 17-23 .
7.	钟锋，唐胜利，王力，邵祎. 煤矿井下硬岩气动冲击回转钻进效率研究. 中国煤炭地质. 2023(06): 59-63 .
8.	孙乾坤. 东海X区块钻井提速研究与应用. 石油地质与工程. 2023(04): 104-107+112 .
9.	Yan Xi，Hao-Yu Wang，Chun-Qing Zha，Jun Li，Gong-Hui Liu，Bo-Yun Guo. Numerical simulation of rock-breaking and influence laws of dynamic load parameters during axial-torsional coupled impact drilling with a single PDC cutter. Petroleum Science. 2023(03): 1806-1827 .
10.	查春青，刘伟，陈杰，董志伟，王宁华，尹传忠. 双向耦合冲击钻具设计与数值模拟. 石油机械. 2022(04): 1-8 .
11.	范永涛，孟振期，邓凤义，钱锋，崔树清，李萍. 华北油田杨税务潜山优快钻井技术研究. 西部探矿工程. 2022(07): 59-62+65 .
12.	李根生，武晓光，宋先知，周仕明，李铭辉，朱海燕，孔彦龙，黄中伟. 干热岩地热资源开采技术现状与挑战. 石油科学通报. 2022(03): 343-364 .
13.	张德龙，郭强，杨鹏，卢彤，吴烁，翁炜，刘宝林. 地热井花岗岩地层钻进提速技术研究与应用进展. 地质与勘探. 2022(05): 1082-1090 .
14.	李博，李相勇，王春华，李玉海，万发明，郑瑞强，柳长鹏. 复合冲击钻井工具在大庆徐深气田现场试验. 西部探矿工程. 2021(01): 50-51+55 .
15.	彭旭，郝世俊. 全尺寸PDC钻头复合冲击破岩机理的有限元分析. 煤田地质与勘探. 2021(02): 240-246+252 .
16.	车继勇，谯正武，李明娜. 井下冲击钻井工具模拟试验装置研制. 石油矿场机械. 2021(03): 80-86 .
17.	刘少权，秦世利，游尧，田波，郑伟. 复合冲击工具在南海东部深部地层提速技术应用. 化工管理. 2021(11): 132-133 .
18.	张文平，王恒，孙德兴，黄河淳，尹慧博，赵建军，崔晓杰. 近钻头冲击器对定向钻进中造斜率的影响规律. 石油机械. 2021(07): 45-52 .
19.	蔡灿，张沛，孙明光，杨迎新，谢松，蒲治成，杨显鹏，高超，谭政博. 油气钻井中的分离式冲击-切削复合破岩机制研究. 岩土力学. 2021(09): 2535-2544 .
20.	熊振宇，田壮壮，何阳子，崔强. 复合冲击器在西湖凹陷深部地层钻井中的应用. 海洋石油. 2021(04): 85-89 .
21.	席岩，夏铭莉，孙念，查春青，李军. 扭转冲击参数对PDC钻头单齿破岩效率的影响. 石油钻采工艺. 2021(05): 574-579 .
22.	刘伟吉，曾义金，祝效华，丁士东. 单齿复合冲击切削破岩机制及其与扭转冲击的对比. 中国石油大学学报(自然科学版). 2020(03): 74-80 .
23.	陈杰，牟小军，李汉兴，赵金成，王烊，陈立伟. 旋冲振荡钻井提速工具的研制与应用. 断块油气田. 2020(03): 386-389 .
24.	马永生，黎茂稳，蔡勋育，徐旭辉，胡东风，曲寿利，李根生，何登发，肖贤明，曾义金，饶莹. 中国海相深层油气富集机理与勘探开发:研究现状、关键技术瓶颈与基础科学问题. 石油与天然气地质. 2020(04): 655-672+683 .
25.	路保平，丁士东，何龙，庞伟. 低渗透油气藏高效开发钻完井技术研究主要进展. 石油钻探技术. 2019(01): 1-7 . 本站查看
26.	金雪萌，黄宇渊，袁钟涛，董明凯，姜旭. 高效破岩新方法研究进展及其应用前景分析. 石油化工应用. 2019(05): 1-6 .
27.	查春青，柳贡慧，李军，汪伟，张涛. 复合谐振钻井工具的研制及现场试验. 石油机械. 2019(05): 66-70 .
28.	汪伟，柳贡慧，李军，查春青，黄涛. 扭转冲击钻井工具的工作特性. 断块油气田. 2019(03): 385-388 .
29.	汪伟，柳贡慧，李军，查春青，黄涛. 复合冲击钻井工具结构设计与运动特性分析. 石油机械. 2019(07): 24-29 .
30.	李相勇. 复合冲击钻井工具在深部难钻地层的应用. 西部探矿工程. 2019(08): 70-72 .
31.	思娜，叶海超，牛新明，王磊，冯建赟，靳瑞环. 油气钻井技术在干热岩开发中的适应性分析. 石油钻探技术. 2019(04): 35-40 . 本站查看
32.	孔华，兰凯，刘香峰，刘明国，晁文学，郗刘明. 基于振动实测的非均质地层钻头失效分析与对策. 天然气工业. 2019(12): 110-115 .
33.	汪为涛. 非均质地层锥形辅助切削齿PDC钻头设计与试验. 石油钻探技术. 2018(02): 58-62 . 本站查看
34.	黄家根，汪海阁，纪国栋，赵飞，明瑞卿，郝亚龙. 超声波高频旋冲钻井技术破岩机理研究. 石油钻探技术. 2018(04): 23-29 . 本站查看
35.	闫炎，管志川，玄令超，呼怀刚，庄立. 复合冲击条件下PDC钻头破岩效率试验研究. 石油钻探技术. 2017(06): 24-30 . 本站查看

Other cited types(17)

Get Citation

PDF

XML

Article Metrics

Article views (9364) PDF downloads (11076) Cited by(52)

The Rock Breaking Mechanism of the Compound Percussive-Rotary Drilling Method with a PDC Bit

Abstract

References

Related Articles

Cited by

Periodical cited type(35)

Other cited types(17)

Catalog

Article Metrics

Related

The Rock Breaking Mechanism of the Compound Percussive-Rotary Drilling Method with a PDC Bit

Abstract

References

Related Articles

Cited by

Periodical cited type(35)

Other cited types(17)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content