Volume 46 Issue 4
Jul.  2018
Turn off MathJax
Article Contents
Abstract
References
Related Articles
HUANG Jiagen, WANG Haige, JI Guodong, ZHAO Fei, MING Ruiqing, HAO Yalong. The Rock Breaking Mechanism of Ultrasonic High Frequency Rotary-Percussive Drilling Technology[J]. Petroleum Drilling Techniques, 2018, 46(4): 23-29. DOI: 10.11911/syztjs.2018097
Citation: HUANG Jiagen, WANG Haige, JI Guodong, ZHAO Fei, MING Ruiqing, HAO Yalong. The Rock Breaking Mechanism of Ultrasonic High Frequency Rotary-Percussive Drilling Technology[J]. Petroleum Drilling Techniques, 2018, 46(4): 23-29. DOI: 10.11911/syztjs.2018097
shu

The Rock Breaking Mechanism of Ultrasonic High Frequency Rotary-Percussive Drilling Technology

  • 1.

    CNPC Engineering Technology R & D Company Limited, Beijing, 102206, China;

  • 2.

    Research Institute of Petroleum Exploration and Development, Beijing, 100083, China

More Information
  • Received Date: February 24, 2018
    Graphical Abstract
    • Abstract
  • The ROP of the traditional drilling in deep hard formations is very low,which seriously affects the process of exploration and development of deep and ultra-deep oilfields. To solve this problem,ultrasonic high frequency rotary-percussive drilling technology was proposed,and the ultrasonic vibration pup joint for realizing the ultrasonic high frequency rotary-percussive drilling was designed by combining the ultrasonic rock breaking technology with the traditional rotary rock breaking technology. Employing geomechanical theories,the rock breaking mechanism of ultrasonic high frequency rotary-percussive drilling was analyzed and a high frequency percussive drilling model was established. Through dimensionless numerical analysis of the high-frequency percussive drilling mathematical model,the three stages of high-frequency percussive drilling were studied,and the influence of key parameters,including weight on bit,frequency and amplitude,on rock breaking efficiency were analyzed in detail. It was observed that the rock breaking efficiency increased as the weight on bit and amplitude increased,and there was an optimal vibration frequency,resulting in the highest rock breaking efficiency. The results showed that the ultrasonic high frequency rotary-percussive drilling technology improved the ROP in deep hard formations by accelerating the fatigue breakdown of hard rocks,reducing the bit stick-slip vibrations and reasonably utilizing resonance energy.
    • FullText(HTML)
    • References (23)
  • [1]
    汪海阁,葛云华,石林.深井超深井钻完井技术现状、挑战和"十三五"发展方向[J].天然气工业,2017,37(4):1-8. WANG Haige,GE Yunhua,SHI Lin.Technologies in deep and ultra-deep well drilling:present status,challenges and future trend in the 13th Five-Year Plan period (2016-2020)[J].Natural Gas Industry,2017,37(4):1-8.
    [2]
    DEPOUHON A,DETOURNAY E.Instability regimes and self-excited vibrations in deep drilling systems[J].Journal of Sound and Vibration,2014,333(7):2019-2039.
    [3]
    柳贡慧,李玉梅,李军,等.复合冲击破岩钻井新技术[J].石油钻探技术,2016,44(5):10-15. LIU Gonghui,LI Yumei,LI Jun,et al.New technology with composite percussion drilling and rock breaking[J].Petroleum Drilling Techniques,2016,44(5):10-15.
    [4]
    陈鑫,陈绍云,王楚,等.扭力冲击器在宋深9H侧钻小井眼水平井中的应用[J].石油钻采工艺,2014,36(6):32-35. CHEN Xin,CHEN Shaoyun,WANG Chu,et al.Application of TorkBuster to sidetracking of slimhole horizontal well in Well Songshen 9H[J].Oil Drilling Production Technology,2014,36(6):32-35.
    [5]
    查春青,柳贡慧,李军,等.复合冲击钻具的研制及现场试验[J].石油钻探技术,2017,45(1):57-61. ZHA Chunqing,LIU Gonghui,LI Jun,et al.Development and field application of a compound percussive jet[J].Petroleum Drilling Techniques,2017,45(1):57-61.
    [6]
    GRAFF K F.Macrosonics in industry:5.ultrasonic machining[J].Ultrasonics,1975,13(3):103-109.
    [7]
    李思琪,闫铁,王希军,等.基于最小作用量原理的岩石微振动方程及分析[J].石油钻探技术,2014,42(3):66-70. LI Siqi,YAN Tie,WANG Xijun,et al.The micro-vibration equation of rock and its analysis basing on the principle of least action[J].Petroleum Drilling Techniques,2014,42(3):66-70.
    [8]
    WIERCIGROCH M,WOJEWODA J,KRIVTSOV A M.Dynamics of ultrasonic percussive drilling of hard rocks[J].Journal of Sound and Vibration,2005,280(3/4/5):739-757.
    [9]
    PAVLOVSKAIA E,WIERCIGROCH M.Modelling of vibro-impact system driven by beat frequency[J].International Journal of Mechanical Sciences,2003,45(4):623-641.
    [10]
    LI Xuan,HARKNESS P,WORRALL K,et al.A parametric study for the design of an optimized ultrasonic percussive planetary drill tool[J].IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control,2017,64(3):577-589.
    [11]
    PAVLOVSKAIA E,HENDRY D C,WIERCIGROCH M.Modelling of high frequency vibro-impact drilling[J].International Journal of Mechanical Sciences,2015,91:110-119.
    [12]
    翟国兵.压力对超声波振动碎岩效果影响规律的研究[D].长春:吉林大学,2016:91. ZHAI Guobing.Study on the effect of the pressure on the ultrasonic vibration in the process of breaking rock[D].Changchun:Jilin University,2016:91.
    [13]
    尹崧宇,赵大军,周宇,等.超声波振动下非均匀岩石损伤过程数值模拟与试验[J].吉林大学学报(地球科学版),2017,47(2):526-533. YIN Songyu,ZHAO Dajun,ZHOU Yu,et al.Numerical simulation and experiment of the damage process of heterogeneous rock under ultrasonic vibration[J].Journal of Jilin University (Earth Science Edition),2017,47(2):526-533.
    [14]
    查春青,柳贡慧,李军,等.复合冲击破岩钻井新技术提速机理研究[J].石油钻探技术,2017,45(2):20-24. ZHA Chunqing,LIU Gonghui,LI Jun,et al.The rock breaking mechanism of the compound percussive-rotary drilling method with a PDC bit[J].Petroleum Drilling Techniques,2017,45(2):20-24.
    [15]
    李琴,谢豆,黄志强,等.硬地层复合钻头破岩特性与提速机理研究[J].机械科学与技术,2017,36(3):347-353. LI Qin,XIE Dou,HUANG Zhiqiang,et al.Studying rock breaking properties and penetration rate improving mechanisms for hybrid drill bit in hard formation[J].Mechanical Science and Technology for Aerospace Engineering,2017,36(3):347-353.
    [16]
    KUMAR S,WU C S,PADHY G K,et al.Application of ultrasonic vibrations in welding and metal processing:a status review[J].Journal of Manufacturing Processes,2017,26:295-322.
    [17]
    FENG Pingfa,WANG Jianjian,ZHANG Jianfu,et al.Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites[J].Ceramics International,2017,43(1,Part A):791-799.
    [18]
    WANG Haige,LI Siqi,JI Guodong,et al.Feasibility study on resonance enhanced drilling technology[J].Advances in Petroleum Exploration and Development,2017,13(2):16-24.
    [19]
    张涛,孙立宁,蔡鹤皋.压电陶瓷基本特性研究[J].光学精密工程,1998,6(5):26-32. ZHANG Tao,SUN Lining,CAI Hegao.Study on the fundamental characteristics of piezoelectric element[J].Optics and Precision Engineering,1998,6(5):26-32.
    [20]
    任福深,程晓泽,李洋,等.粒子射流耦合冲击破岩建模与实验分析[J].工程力学,2017,34(2):249-256. REN Fushen,CHENG Xiaoze,LI Yang,et al.Mathematical modeling and experimental analysis of coupled particle and jet flow rock breaking[J].Engineering Mechanics,2017,34(2):249-256.
    [21]
    李思琪,李玮,闫铁,等.复合载荷作用下钻头冲击破岩机理研究及现场应用[J].振动与冲击,2017,36(16):51-55. LI Siqi,LI Wei,YAN Tie,et al.A study on the rock breaking mechanism of drill bits under combined loads and field applications[J].Journal of Vibration and Shock,2017,36(16):51-55.
    [22]
    马清明.水力脉冲诱发井下振动钻井技术[J].石油钻探技术,2005,33(1):12-14. MA Qingming.The down hole vibration drilling technique induced by hydro pulse[J].Petroleum Drilling Techniques,2005,33(1):12-14.
    [23]
    蔡美峰,何满潮,刘东燕.岩石力学与工程[M].北京:科学出版社,2002:39-48. CAI Meifeng,HE Manchao,LIU Dongyan.Rock mechanics and engineering[M].Beijing:Science Press,2002:39-48.
    • Related Articles

  • Related Articles

    [1]CUI Hailin, ZHOU Yanjun, TANG Honglin, CAO Liming, SUN Ronghua, XIAO Xinlei. Integrated Wellbore Technologies to Enhance the Rate of Penetration for Well Dingye 5[J]. Petroleum Drilling Techniques, 2018, 46(1): 24-29. DOI: 10.11911/syztjs.2018029
    [2]YAN Yan, GUAN Zhichuan, XUAN Lingchao, HU Huaigang, ZHUANG Li. Experimental Study on Rock Breaking Efficiency with a PDC Bit under Conditions of Composite Percussion[J]. Petroleum Drilling Techniques, 2017, 45(6): 24-30. DOI: 10.11911/syztjs.201706005
    [3]ZHA Chunqing, LIU Gonghui, LI Jun, LI Yumei, XI Yan. The Rock Breaking Mechanism of the Compound Percussive-Rotary Drilling Method with a PDC Bit[J]. Petroleum Drilling Techniques, 2017, 45(2): 20-24. DOI: 10.11911/syztjs.201702004
    [4]LIU Gonghui, LI Yumei, LI Jun, ZHA Chunqing, ZHANG Tao, HUO Mingming. New Technology with Composite Percussion Drilling and Rock Breaking[J]. Petroleum Drilling Techniques, 2016, 44(5): 10-15. DOI: 10.11911/syztjs.201605002
    [5]HU Qiong, CHE Qiang, REN Xiaoling. Pilot Tests on Thermal-Mechanical Composite Rock-Breaking Methods[J]. Petroleum Drilling Techniques, 2016, 44(1): 29-33. DOI: 10.11911/syztjs.201601006
    [6]Li Kezhi, Yan Jizeng. Difficulties and Technical Countermeasures for Improving Penetration Rate of Horizontal Wells in Honghe Oilfield[J]. Petroleum Drilling Techniques, 2014, 42(2): 117-122. DOI: 10.3969/j.issn.1001-0890.2014.02.023
    [7]Li Wei, Yan Tie, Zhang Zhichao, Li Lianqun. Rock Response Mechanism and Rock Breaking Test Analysis for Impact of High Frequency Vibration Drilling Tool[J]. Petroleum Drilling Techniques, 2013, 41(6): 25-28. DOI: 10.3969/j.issn.1001-0890.2013.06.005
    [8]Zhu Zhongxi, Liu Yingbiao, Lu Zongyu, Xiong Xudong. Increasing the Penetration Rate for Piedmont Belt of Junggar Basin[J]. Petroleum Drilling Techniques, 2013, 41(2): 34-38. DOI: 10.3969/j.issn.1001-0890.2013.02.007
    [9]Jin Yequan, Wang Maolin. PDC Bit Drilling Parameter Optimization Design Integrating Cost and Drilling Rate[J]. Petroleum Drilling Techniques, 2012, 40(5): 13-16. DOI: 10.3969/j.issn.1001-0890.2012.05.003
    [10]Effect of Drilling Fluid Inorganic Salt on Rate of Penetration[J]. Petroleum Drilling Techniques, 2011, 39(4): 48-52. DOI: 10.3969/j.issn.1001-0890.2011.04.010

  • Cited by

    Periodical cited type(17)

    1. 王旭锋，牛志军，张磊，李翔宇，王纪尧，常泽超，陈旭阳. 超声振动在矿山煤岩致裂中的研究进展与展望. 煤炭科学技术. 2024(01): 232-243 .
    2. 杨小聪，黄丹，岳小磊，王想. 非煤矿山机械连续采矿技术研究进展与发展趋势. 有色金属(矿山部分). 2024(06): 1-24 .
    3. 向玲，王成东，周政. 硬岩地基基础快速成桩技术的研究进展. 城市建设理论研究(电子版). 2024(32): 117-119 .
    4. 黄继庆，胡海，樊思成，刘伟吉，祝效华. 基于扩展PFC2D-GBM模型的单齿切削花岗岩破碎机制. 中国石油大学学报(自然科学版). 2023(02): 81-89 .
    5. 刘伟吉，张有建，祝效华，胡海，何灵，陈梦秋. 影响高压电脉冲破岩效率的关键因素分析. 天然气工业. 2023(10): 112-124 .
    6. 齐悦，柳贡慧，李军，查春青，田玉栋，李玉梅. 基于单齿多维度冲击破岩机理仿真研究. 石油机械. 2023(12): 1-7 .
    7. 王少锋，孙立成，周子龙，吴毓萌，石鑫垒. 非爆破岩理论和技术发展与展望. 中国有色金属学报. 2022(12): 3883-3912 .
    8. 赵研，张丛珊，高科，张增增，赵大军，李家晟，吕晓姝，平天才. 超声波辅助PDC切削齿振动破岩仿真分析. 钻探工程. 2021(04): 11-20 .
    9. 路宗羽，郑珺升，蒋振新，赵飞. 超声波高频旋冲钻井技术破岩效果试验研究. 石油钻探技术. 2021(02): 20-25 . 本站查看
    10. 李鹏，蔡美峰. 深部金属矿产资源开发面临的挑战及新见解（英文）. Transactions of Nonferrous Metals Society of China. 2021(11): 3478-3505 .
    11. 聂佳辉，吴志鑫，雷磊，郑靖，周仲荣. TBM的刀具改性与辅助破岩技术研究现状. 机械. 2021(12): 1-10+19 .
    12. 王海军，郁舒阳，李汉章，任然，汤雷，朱文炜. 基于3D-ILC超声场致脆性固体单内裂纹扩展规律研究. 岩石力学与工程学报. 2020(05): 938-948 .
    13. 徐梓辰，金衍，腾学清. 液压式应力波辅助破岩工具设计及实验研究. 机床与液压. 2020(19): 1-7 .
    14. 刘春生，韩德亮，那洪亮. 碟盘振动切削煤岩机构的动力学模型与幅频特性. 黑龙江科技大学学报. 2020(05): 499-504 .
    15. 李玉梅，张涛，苏中，于丽维，刘建明. 复合冲击频率配合特性模拟研究. 石油机械. 2019(09): 30-36 .
    16. 索忠伟. ?228.6mm射流冲击器研制及硬地层提速试验. 石油钻探技术. 2019(04): 54-58 . 本站查看
    17. 李玉梅，于丽维，张涛，苏中，刘建明. 复合冲击钻井立体破岩特性模拟研究. 系统仿真学报. 2019(11): 2471-2476 .

    Other cited types(23)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (2750) PDF downloads (5563) Cited by(40)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return