Citation: | LI Tao, SU Qiang, YANG Zhe, et al. Current practices and research directions for drilling and completion technologies for ultra-deep wells in western Sichuan [J]. Petroleum Drilling Techniques,2023, 51(2):7-15. DOI: 10.11911/syztjs.2022028 |
Western Sichuan, a region rich in oil and gas resources, is confronted with technical challenges in drilling engineering, such as multiple vertical pressure systems, frequent loss of circulation, wellbore instability and collapse, poor drillability of certain formations, high drilling risks, and long drilling duration, due to the complex geological conditions of ultra-deep marine carbonates. Thanks to research conducted in the last few years, drilling and completion technologies for ultra-deep wells, suitable for western Sichuan, have been developed, namely those incorporating casing program optimization for ultra-deep wells, key technologies for rate of penetration(ROP) increase, lost circulation control, managed pressure drilling for high-pressure and low-permeability gas reservoirs, oil-based drilling fluid with high-temperature resistance and strong blocking ability, sidetracking in ultra-deep casings with higher steel grade, cementing based on a pressure control and balance method, cementing in ultra-deep hole with short liner suspension. These technologies contributed to the exploration and development of ultra-deep oil and gas resources in western Sichuan and set many drilling engineering records. However, there are still some technical challenges, such as insufficient understanding of geological conditions in the risky area, great difficulty in controlling serious lost circulation, difficult ROP increase in some hard drilling formations, and fewer associated technologies for safe drilling of formations with narrow mud weight window. In this paper, future research directions were proposed, including casing program design, pilot tests of new technologies for ROP increase, efficient control of lost circulation, and geology-engineering integration, etc. They are expected to boost the rapid development of drilling and completion technologies for ultra-deep wells in western Sichuan and realize economical and effective exploration and development of deep oil and gas resources in the region.
[1] |
路保平. 中国石化石油工程技术新进展与发展建议[J]. 石油钻探技术,2021,49(1):1–10. doi: 10.11911/syztjs.2021001
LU Baoping. New progress and development proposals of Sinopec’s petroleum engineering technologies[J]. Petroleum Drilling Techniques, 2021, 49(1): 1–10. doi: 10.11911/syztjs.2021001
|
[2] |
汪海阁,黄洪春,毕文欣,等. 深井超深井油气钻井技术进展与展望[J]. 天然气工业,2021,41(8):163–177.
WANG Haige, HUANG Hongchun, BI Wenxin, et al. Deep and ultra-deep oil/gas well drilling technologies: progress and prospect[J]. Natural Gas Industry, 2021, 41(8): 163–177.
|
[3] |
邓虎,贾利春. 四川盆地深井超深井钻井关键技术与展望[J]. 天然气工业,2022,42(12):82–94. doi: 10.3787/j.issn.1000-0976.2022.12.009
HAN Liexiang. Key technologies for drilling deep and ultra-deep wells in the Sichuan Basin: current status, challenges and prospects[J]. Natural Gas Industry, 2022, 42(12): 82–94. doi: 10.3787/j.issn.1000-0976.2022.12.009
|
[4] |
陈宗琦,刘湘华,白彬珍,等. 顺北油气田特深井钻井完井技术进展与发展思考[J]. 石油钻探技术,2022,50(4):1–10. doi: 10.11911/syztjs.2022069
CHEN Zongqi, LIU Xianghua, BAI Binzhen, et al. Technical progress and development consideration of drilling and completion engineering for ultra-deep wells in the Shunbei Oil & Gas Field[J]. Petroleum Drilling Techniques, 2022, 50(4): 1–10. doi: 10.11911/syztjs.2022069
|
[5] |
王建云,韩涛,赵宽心,等. 塔深5井超深层钻井关键技术[J]. 石油钻探技术,2022,50(5):27–33. doi: 10.11911/syztjs.2022074
WANG Jianyun, HAN Tao, ZHAO Kuanxin, et al. Key drilling technologies for the ultra-deep well Tashen 5[J]. Petroleum Drilling Techniques, 2022, 50(5): 27–33. doi: 10.11911/syztjs.2022074
|
[6] |
胡大梁,欧彪,郭治良,等. 川西二叠系超深风险井永胜1井钻井关键技术[J]. 断块油气田,2019,26(4):524–528.
HU Daliang, OU Biao, GUO Zhiliang, et al. Key drilling technology of Permian ultra-deep risk exploration well YS1 in western Sichuan[J]. Fault-Block Oil & Gas Field, 2019, 26(4): 524–528.
|
[7] |
蔡珺君,彭先,李隆新,等. 超深层碳酸盐岩气田产能评价的扩展“一点法”[J]. 断块油气田,2022,29(4):446–454.
CAI Junjun, PENG Xian, LI Longxin, et al. Extended “one point method” for productivity evaluation of ultra-deep carbonate gas fields[J]. Fault-Block Oil & Gas Field, 2022, 29(4): 446–454.
|
[8] |
曾义金.中国石化深层超深层油气井固井技术新进展与发展建议[J/OL]. 石油钻探技术, 2023: 1-13.(2023-03-13)[2023-04-02]. https://kns.cnki.net/kcms/detail/11.1763.TE.20230302.1624.002.html
ZENG Yijin. New progresses and development suggestions of cementing technology on deep and ultra-deep wells of Sinopec[J/OL]. Petroleum Drilling Tecniques, 2023: 1-13.(2023-03-13)[2023-04-02]. https://kns.cnki.net/kcms/detail/11.1763.TE.20230302.1624.002.html
|
[9] |
章景城,马立君,刘勇,等. 塔里木油田超深井超小井眼定向钻井技术研究与应用[J]. 特种油气藏,2020,27(2):164–168.
ZHANG Jingcheng, MA Lijun, LIU Yong, et al. Directional drilling technology for ultra-deep and ultra slim-hole well and its application in Tarim Oilfield[J]. Special Oil & Gas Reservoirs, 2020, 27(2): 164–168.
|
[10] |
周林波,刘红磊,李丹,等. 碳酸盐岩油藏高温超深井高导流自支撑酸化压裂技术[J]. 特种油气藏,2022,29(3):144–149.
ZHOU Linbo, LIU Honglei, LI Dan, et al. Acid fracturing technology for high-conductivity unpropped fractures in ultra-deep wells with high temperature in carbonate reservoirs[J]. Special Oil & Gas Reservoirs, 2022, 29(3): 144–149.
|
[11] |
苏强,陈颖杰,沈欣宇,等. 川西地区超深井井身结构优化研究与应用:以双鱼石构造为例[J]. 中国石油和化工标准与质量,2017,37(20):180–181. doi: 10.3969/j.issn.1673-4076.2017.20.083
SU Qiang, CHEN Yingjie, SHEN Xinyu, et al. Optimization research and application of ultra deep well structure in western Sichuan Province: Taking pistachite structure as an example[J]. China Petroleum and Chemical Standard and Quality, 2017, 37(20): 180–181. doi: 10.3969/j.issn.1673-4076.2017.20.083
|
[12] |
胡大梁,欧彪,何龙,等. 川西海相超深大斜度井井身结构优化及钻井配套技术[J]. 石油钻探技术,2020,48(3):22–28. doi: 10.11911/syztjs.2020053
HU Daliang, OU Biao, HE long, et al. Casing program optimization and drilling matching technologies for marine ultra-deep highly deviated wells in western Sichuan[J]. Petroleum Drilling Technology, 2020, 48(3): 22–28. doi: 10.11911/syztjs.2020053
|
[13] |
周代生,杨欢,胡锡辉,等. 川西双鱼石构造超深井大尺寸井眼钻井提速技术研究[J]. 钻采工艺,2019,42(6):25–27. doi: 10.3969/J.ISSN.1006-768X.2019.06.07
ZHOU Dai Sheng, YANG Huan, HU Xi Hui, et al. Study on ROP improvement technology for large-size ultradeep wells at Shuangyushi Structure in western Sichuan[J]. Drilling & Production Technology, 2019, 42(6): 25–27. doi: 10.3969/J.ISSN.1006-768X.2019.06.07
|
[14] |
苏强,何世明,胡锡辉,等. 川西双鱼石构造难钻地层岩石可钻性及钻头选型研究与应用[J]. 钻采工艺,2019,42(2):124–127. doi: 10.3969/J.ISSN.1006-768X.2019.02.35
SU Qiang, HE Shiming, HU Xihui, et al. Research and application on rock drillability and bit selection of difficult drilling formations in Shuangyushi structure of western Sichuan Basin[J]. Drilling & Production Technology, 2019, 42(2): 124–127. doi: 10.3969/J.ISSN.1006-768X.2019.02.35
|
[15] |
杨博仲,汪瑶,叶小科. 川西地区复杂超深井钻井技术[J]. 钻采工艺,2018,41(4):27–30. doi: 10.3969/J.ISSN.1006-768X.2018.04.09
YANG Bozhong, WANG Yao, YE Xiaoke. Drilling technology for complex ultradeep wells at west Sichuan Area[J]. Drilling & Production Technology, 2018, 41(4): 27–30. doi: 10.3969/J.ISSN.1006-768X.2018.04.09
|
[16] |
刘建华,令文学,王恒. 非平面三棱形PDC齿破岩机理研究与现场试验[J]. 石油钻探技术,2021,49(5):46–50. doi: 10.11911/syztjs.2021040
LIU Jianhua, LING Wenxue, WANG Heng. Study on rock breaking mechanism and field test of triangular prismatic pdc cutters[J]. Petroleum Drilling Techniques, 2021, 49(5): 46–50. doi: 10.11911/syztjs.2021040
|
[17] |
何立成,唐波. 准噶尔盆地超深井钻井技术现状与发展建议[J]. 石油钻探技术,2022,50(5):1–8. doi: 10.11911/syztjs.2022092
HE Licheng, TANG Bo. The up to date technologies of ultra-deep well drilling in Junggar Basin and suggestions for further improvements[J]. Petroleum Drilling Techniques, 2022, 50(5): 1–8. doi: 10.11911/syztjs.2022092
|
[18] |
滕学清,刘洪涛,李宁,等. 塔里木博孜区块超深井自动垂直钻井难点与技术对策[J]. 石油钻探技术,2021,49(1):11–15. doi: 10.11911/syztjs.2020113
TENG Xueqing, LIU Hongtao, LI Ning, et al. Difficulties and technical countermeasures for automatic vertical drilling in ultra-deep wells in the Bozi Block of the Tarim Basin[J]. Petroleum Drilling Techniques, 2021, 49(1): 11–15. doi: 10.11911/syztjs.2020113
|
[19] |
王涛,刘锋报,罗威,等. 塔里木油田防漏堵漏技术进展与发展建议[J]. 石油钻探技术,2021,49(1):28–33. doi: 10.11911/syztjs.2020080
WANG Tao, LIU Fengbao, LUO Wei, et al. The technical advance and development suggestions for leakage prevention and plugging technologies in the Tarim Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(1): 28–33. doi: 10.11911/syztjs.2020080
|
[20] |
王强,袁和义,刘阳,等. 深井超深井裂缝性地层致密承压封堵实验研究[J]. 西南石油大学学报(自然科学版),2021,43(4):109–117.
WANG Qiang, YUAN Heyi, LIU Yang, et al. An experimental investigation on pressure bearing and tight plugging of fractured formations in deep and ultra-deep wells[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2021, 43(4): 109–117.
|
[21] |
艾磊,宫臣兴,谢江锋,等. 超分子聚合物堵漏技术在长庆油田恶性漏失井的应用[J]. 钻井液与完井液,2021,38(6):705–714.
AI Lei, GONG Chenxing, XIE Jiangfeng, et al. Application of supramolecular polymer plugging technology in Changing Oilfield[J]. Drilling Fluid & Completion Fluid, 2021, 38(6): 705–714.
|
[22] |
王文刚,胡大梁,欧彪,等. 井研-犍为地区缝洞型复杂地层钻井关键技术[J]. 石油钻探技术,2022,50(2):58–63. doi: 10.11911/syztjs.2021100
WANG Wengang, HU Daliang, OU Biao, et al. Key drilling technologies for complex fracture-cavity formation in Jingyan-Qianwei Area[J]. Petroleum Drilling Techniques, 2022, 50(2): 58–63. doi: 10.11911/syztjs.2021100
|
[23] |
杨倩云,王宝田,杨华,等. 形状记忆聚合物型温控膨胀堵漏剂的制备及应用[J]. 钻井液与完井液,2021,38(2):189–195.
YANG Qianyun,WANG Baotian,YANG Hua,et al. Preparation and application of temperature-controlled expansion plugging agent based on shape memory polymer[J]. Drilling Fluid & Completion Fluid, 2021, 38(2): 189–195.
|
[24] |
曾义金. 海相碳酸盐岩超深油气井安全高效钻井关键技术[J]. 石油钻探技术,2019,47(3):25–33. doi: 10.11911/syztjs.2019062
ZENG Yijin. Key technologies for safe and efficient drilling of marine carbonate ultra-deep oil and gas wells[J]. Petroleum drilling technology, 2019, 47(3): 25–33. doi: 10.11911/syztjs.2019062
|
[25] |
赵德,赵维青,卢先刚,等. 西非S深水区块裂缝性碳酸盐岩地层控压钻井技术[J]. 石油钻采工艺,2022,44(1):20–25. doi: 10.13639/j.odpt.2022.01.004
ZHAO De, ZHAO Weiqing, LU Xiangang, et al. Managed pressure drilling technology for fractured carbonate formation in deep water Block S West Africa[J]. Oil Drilling & Production Technology, 2022, 44(1): 20–25. doi: 10.13639/j.odpt.2022.01.004
|
[26] |
熊战,何悦峰,张闯,等. 青海油田深探井优快钻井关键技术[J]. 石油钻采工艺,2021,43(6):698–704. doi: 10.13639/j.odpt.2021.06.002
XIONG Zhan, HE Yuefeng, ZHANG Chuang, et al. Key technologies for optimized fast drilling of deep exploration wells in Qinghai Oilfield[J]. Oil Drilling & Production Technology, 2021, 43(6): 698–704. doi: 10.13639/j.odpt.2021.06.002
|
[27] |
谭鹏,何思龙,李明印,等. 库车坳陷超深层复杂气田钻完井技术[J]. 石油钻采工艺,2021,43(5):580–585. doi: 10.13639/j.odpt.2021.05.004
TAN Peng, HE Silong, LI Mingyin, et al. Drilling and completion technologies for ultra-deep complex gas field in Kuqu Depression[J]. Oil Drilling & Production Technology, 2021, 43(5): 580–585. doi: 10.13639/j.odpt.2021.05.004
|
[28] |
刘湘华,刘彪,杜欢,等. 顺北油气田断裂带超深水平井优快钻井技术[J]. 石油钻探技术,2022,50(4):11–17. doi: 10.11911/syztjs.2022072
LIU Xianghua, LIU Biao, DU Huan, et al. Optimal and fast drilling technologies for ultra-deep horizontal wells in the fault zones of the Shunbei Oil & Gas Field[J]. Petroleum Drilling Techniques, 2022, 50(4): 11–17. doi: 10.11911/syztjs.2022072
|
[29] |
白彬珍,曾义金,葛洪魁. 顺北56X特深水平井钻井关键技术[J]. 石油钻探技术,2022,50(6):49–55. doi: 10.11911/syztjs.2022114
BAI Binzhen, ZENG Yijin, GE Hongkui. Key technologies for the drilling of ultra-deep horizontal well Shunbei 56X[J]. Petroleum Drilling Techniques, 2022, 50(6): 49–55. doi: 10.11911/syztjs.2022114
|
[30] |
刘可成,周俊,崔鑫,等. 阜康凹陷井壁失稳机理与封堵防塌油基钻井液体系[J]. 钻井液与完井液,2022(4):451–458.
LIU Kecheng, ZHOU Jun, CUI Xin, et al. Mechanisms of borehole wall instability in Fukang sag block and an oil based drilling fluid with plugging and inhibitive capacities[J]. Drilling Fluid & Completion Fluid, 2022(4): 451–458.
|
[31] |
李涛,徐卫强,苏强. 超深井155V高钢级厚壁套管开窗技术[J]. 复杂油气藏,2022,15(1):96–100. doi: 10.16181/j.cnki.fzyqc.2022.01.019
LI Tao, XU Weiqiang, SU Qiang. 155V high-grade steel thick-wall casing window opening technology forultra-deep wells[J]. Complex Hydrocarbon Reservoirs, 2022, 15(1): 96–100. doi: 10.16181/j.cnki.fzyqc.2022.01.019
|
[32] |
王敬朋,张伟,吴继伟,等. 呼探1井ϕ139.7 mm尾管精细动态控压固井技术[J]. 石油钻探技术,2022,50(6):92–97. doi: 10.11911/syztjs.2022021
WANG Jingpeng, ZHANG Wei, WU Jiwei, et al. Precise dynamic managed-pressure cementing technologies for ϕ139.7 mm liner cementing in Well Hutan-1[J]. Petroleum Drilling Techniques, 2022, 50(6): 92–97. doi: 10.11911/syztjs.2022021
|
[33] |
李涛,徐卫强,苏强,等. 四川盆地高温高压含硫气井五级分支井钻完井技术[J]. 石油钻采工艺,2022,44(3):269–275. doi: 10.13639/j.odpt.2022.03.001
LI Tao, XU Weiqiang, SU Qiang, et al. Drilling and completion technology for 5-multilateral sulfur-bearing gas wells with high temperature and high pressure in Sichuan Basin[J]. Oil Drilling & Production Technology, 2022, 44(3): 269–275. doi: 10.13639/j.odpt.2022.03.001
|
[34] |
马勇,郑有成,徐冰青,等. 精细控压压力平衡法固井技术的应用实践[J]. 天然气工业,2017,37(8):61–65. doi: 10.3787/j.issn.1000-0976.2017.08.007
MA Yong, ZHENG Youcheng, XU Bingqing, et al. Application precise MPD & pressure balance cementing technology[J]. Natural Gas Industry, 2017, 37(8): 61–65. doi: 10.3787/j.issn.1000-0976.2017.08.007
|
[35] |
郭建华,郑有成,李维,等. 窄压力窗口井段精细控压压力平衡法固井设计方法与应用[J]. 天然气工业,2019,39(11):86–91. doi: 10.3787/j.issn.1000-0976.2019.11.011
GUO Jianhua, ZHENG Youcheng, LI Wei, et al. Design and application of well cementing technology based on the precise managed pressure balancing method in narrow pressure window hole sections[J]. Natural Gas Industry, 2019, 39(11): 86–91. doi: 10.3787/j.issn.1000-0976.2019.11.011
|
[36] |
刘洋,陈敏,吴朗,等. 四川盆地窄密度窗口超深井控压固井工艺[J]. 钻井液与完井液,2020,37(2):214–220. doi: 10.3969/j.issn.1001-5620.2020.02.014
LIU Yang, CHEN Min, WU Lang, et al. Managed pressure well cementing techniques for wells with narrow safe drilling windows in Sichuan Basin[J]. Drilling Fluid & Completion Fluid, 2020, 37(2): 214–220. doi: 10.3969/j.issn.1001-5620.2020.02.014
|
[37] |
胡晋军,张立丽,张耀,等. 埕海油田大斜度井超短尾管固井技术[J]. 石油钻探技术,2021,49(3):81–86. doi: 10.11911/syztjs.2020132
HU Jinjun, ZHANG Lili, ZHANG Yao, et al. Ultra-short liner cementing technology for highly deviated wells in the Chenghai Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(3): 81–86. doi: 10.11911/syztjs.2020132
|
[1] | YU Libin, ZHANG Zhigang, JIANG Zhaomin, XU Hui, ZHANG Hongfu, HAN Xurui. Development and Field Testing of the Bionic Peristaltic Drilling Tool[J]. Petroleum Drilling Techniques, 2025, 53(1): 55-59. DOI: 10.11911/syztjs.2024113 |
[2] | WU Xiaoguang, HUANG Zhongwei, LI Gensheng, SHI Huaizhong, LIU Shoujun, LIU Xin. Research and Field Test of Ultra-Short Radius Horizontal Drilling Technology Combining Coiled Tubing and Flexible BHA[J]. Petroleum Drilling Techniques, 2022, 50(6): 56-63. DOI: 10.11911/syztjs.2022119 |
[3] | GUO Yi, GAO Xiaofei, YI Huian, DAI Ling, XU Liqian, LIU Jia. Research and Field Test on Life-Long Water Control Completion Technology in Offshore Oilfields[J]. Petroleum Drilling Techniques, 2021, 49(6): 93-98. DOI: 10.11911/syztjs.2021120 |
[4] | YANG Haibo, HOU Ting, FENG Dejie, TENG Zhaozheng, WU Liugen. Research and Field Test of Non-Drilling Plug Expandable Casing Patching Technology[J]. Petroleum Drilling Techniques, 2017, 45(5): 73-77. DOI: 10.11911/syztjs.201705013 |
[5] | ZHA Chunqing, LIU Gonghui, LI Jun, LI Yumei, XI Yan, LIAN Wei. Development and Field Application of a Compound Percussive Jet[J]. Petroleum Drilling Techniques, 2017, 45(1): 57-61. DOI: 10.11911/syztjs.201701010 |
[6] | ZHENG Xiaozhi, GU Lei, MA Lanrong, ZHANG Guoan. Performance and Field Tests of Rotary Expandable Liner Hanger[J]. Petroleum Drilling Techniques, 2016, 44(3): 55-60. DOI: 10.11911/syztjs.201603010 |
[7] | Wang Zaiming, Zhu Kuanliang, Feng Jinghai, Wu Yan, Shen Yuanyuan. Development and Field Test of High-Temperature Gel Valve[J]. Petroleum Drilling Techniques, 2015, 43(4): 78-82. DOI: 10.11911/syztjs.201504014 |
[8] | Peng Mingwang, Bai Binzhen, Wang Ke, Li Shaoan, Li Fei. Test of Constant Torque Converter while Drilling in Well TH121125[J]. Petroleum Drilling Techniques, 2014, 42(6): 120-123. DOI: 10.11911/syztjs.201406024 |
[9] | Wu Jie, Xiao Songping, Xu Min, Huang Lin, Peng Chao. Drilling Engineering Optimization and Implementation for Well Su 25-2-2H[J]. Petroleum Drilling Techniques, 2013, 41(5): 115-118. DOI: 10.3969/j.issn.1001-0890.2013.05.023 |
[10] | Liu Gang, Sun Jin, He Baosheng, Tian Ji, Geng Zhanli. Design and Field Test of Surface Monitoring System for Directional Wells Anti-Collision[J]. Petroleum Drilling Techniques, 2012, 40(1): 7-11. DOI: 10.3969/j.issn.1001-0890.2012.01.002 |