Volume 45 Issue 5
Sep.  2017
Turn off MathJax
Article Contents
Abstract
References
Related Articles
YANG Haibo, HOU Ting, FENG Dejie, TENG Zhaozheng, WU Liugen. Research and Field Test of Non-Drilling Plug Expandable Casing Patching Technology[J]. Petroleum Drilling Techniques, 2017, 45(5): 73-77. DOI: 10.11911/syztjs.201705013
Citation: YANG Haibo, HOU Ting, FENG Dejie, TENG Zhaozheng, WU Liugen. Research and Field Test of Non-Drilling Plug Expandable Casing Patching Technology[J]. Petroleum Drilling Techniques, 2017, 45(5): 73-77. DOI: 10.11911/syztjs.201705013
shu

Research and Field Test of Non-Drilling Plug Expandable Casing Patching Technology

  • Drilling Technology Research Institute, Sinopec Shengli Oilfield Service Corporation, Dongying, Shandong, 257000, China

More Information
  • Received Date: May 24, 2017
  • Revised Date: September 13, 2017
    Graphical Abstract
    • Abstract
  • Drilling plug operations must be carried out after casing repair by means of the traditional expandable casing patching technology,which results in an extended workover period and increased operating expenses.Therefore, non-drilling plug expandable casing patching technology were developed after determination of performance indicators and applying working condition of tools by structural design of non-drilling plug device,parameter optimization of tools,verification of laboratory experiment.Laboratory test results showed that the performance indicators of this device in wells with damaged casing met site implementation requirements.Construction parameters and working conditions were made clear.Moreover,the site implementation flow for non-drilling plug expandable casing patching technology was established.The field test results in Well CDX-56P of Bohai Gulf indicated that this non-drilling plug device could satisfy the site construction requirements for anti-torsion and anti-pressure,etc and it also possessed good field practicability.The successful test of non-drilling plug expandable casing patching technology provided the technical means of shorter operating cycle and lower costs for harnessing the development of wells with damaged casing.
    • FullText(HTML)
    • References (19)
  • [1]
    陈培亮,井恩江,王玉多,等.膨胀管封隔复杂地层钻完井技术在侧钻井的应用[J].石油机械,2015,43(12):25-28. CHEN Peiliang,JING Enjiang,WANG Yuduo,et al.Drilling and expandable casing completion for complex formation isolation in sidetrack well[J].China Petroleum Machinery,2015,43(12):25-28.
    [2]
    刘鹏,夏柏如,陶兴华,等.膨胀波纹管在大牛地气田定向井段的应用[J].石油钻探技术,2017,45(2):61-67. LIU Peng,XIA Bairu,TAO Xinghua,et al.The application of solid expandable liners in directional well sections of the Daniudi Gas Field[J].Petroleum Drilling Techniques,2017,45(2):61-67.
    [3]
    何伟国,唐明,吴柳根.塔河油田深层侧钻水平井膨胀套管钻井完井技术[J].石油钻探技术,2013,41(5):62-66. HE Weiguo,TANG Ming,WU Liugen.Expandable casing drilling and completion technology in deep sidetracked horizontal wells of Tahe Oilfield[J].Petroleum Drilling Techniques,2013,41(5):62-66.
    [4]
    王全宾,高昆,强琳,等.基于不同材料模型的膨胀管有限元分析[J].石油矿场机械,2016,45(2):54-57. WANG Quanbin,GAO Kun,QIANG Lin,et al.Numerical simulation of solid expandable tubular based on ABAQUS[J].Oil Field Equipment,2016,45(2):54-57.
    [5]
    于洋,周伟,刘晓民,等.实体膨胀管的膨胀力有限元数值模拟及其应用[J].石油钻探技术,2013,41(5):107-110. YU Yang,ZHOU Wei,LIU Xiaomin,et al.Finite element numerical simulation of expansive force on solid expandable tube and its application[J].Petroleum Drilling Techniques,2013,41(5):107-110.
    [6]
    郭慧娟,徐丙贵,吕明杰,等.膨胀锥斜面角对膨胀管裸眼系统的影响分析[J].石油机械,2015,43(8):32-36. GUO Huijuan,XU Bingui,LYU Mingjie,et al.Effect of expanding cone bevel angle on expandable tubular open hole system[J].China Petroleum Machinery,2015,43(8):32-36.
    [7]
    张昊,刘宇飞,王玲玲,等.冀东油田出砂斜井液压膨胀管补贴技术[J]. 石油钻采工艺,2011,33(5):113-116. ZHANG Hao,LIU Yufei,WANG Lingling,et al. Hydraulic expandable tubular patching technology for high angle deviated sanding wells in Jidong Oilfield[J]. Oil Drilling Production Technology,2011,33(5):113-116.
    [8]
    杨晓莉.基于金属密封的膨胀管悬挂力试验研究[J].石油矿场机械,2015,44(8):44-48. YANG Xiaoli.Experimental study of hanging force of solid expandable tubular based on metal seal[J].Oil Field Equipment,2015,44(8):44-48.
    [9]
    唐明,滕照正,吴柳根,等.膨胀套管螺纹连接技术研究[J].钻采工艺,2016,39(5):58-61. TANG Ming,TENG Zhaozheng,WU Liugen,et al.Research on thread connection of expandable casing[J].Drilling Production Technology,2016,39(5):58-61.
    [10]
    武琳娜,陈亮,梅博文,等.塔河油田膨胀管侧钻水平井技术的应用[J].机械研究与应用,2015,28(5):138-141. WU Linna,CHEN Liang,MEI Bowen,et al.Application of expandable casing drilling technology for sidetrack horizontal well in Tahe Oilfield[J].Mechanical Research Application,2015,28(5):138-141.
    [11]
    黄满良,黄华宁,张飙,等.膨胀管补贴技术中管柱伸长问题研究[J].石油矿场机械,2015,44(4):91-94. HUANG Manliang,HUANG Huaning,ZHANG Biao,et al.A page of pipe stretch problems in expansion casing patching technology research[J].Oil Field Equipment,2015,44(4):91-94.
    [12]
    陈强,李涛,张立新,等.膨胀管系统运动分析及腐蚀寿命计算[J].石油矿场机械,2015,44(12):23-27. CHEN Qiang,LI Tao,ZHANG Lixin,et al.Study of expandable tubular system and its longevity calculation under corrosion[J].Oil Field Equipment,2015,44(12):23-27.
    [13]
    胥豪,崔海林,张玲,等.塔河油田膨胀管井钻井技术[J].石油钻采工艺,2013,35(4):26-29. XU Hao,CUI Hailin,ZHANG Ling,et al.Expandable tubular drilling technology in Tahe Oilfield[J].Oil Drilling Production Technology,2013,35(4):26-29.
    [14]
    唐明,吴柳根,赵志国,等.深层侧钻水平井膨胀套管钻井封堵技术研究[J].石油机械,2013,41(2):6-9. TANG Ming,WU Liugen,ZHAO Zhiguo,et al.Research on the technology of expandable casing drilling plugging for deep layer sidetrack horizontal well[J].China Petroleum Machinery,2013,41(2):6-9.
    [15]
    宁学涛,蔡鹏,唐明,等.海上深井膨胀悬挂器钻完井技术研究及应用[J].石油机械,2012,40(10):54-58. NING Xuetao,CAI Peng,TANG Ming,et al.Research and application of the expandable hanger for drilling and completion of offshore deep well[J].China Petroleum Machinery,2012,40(10):54-58.
    [16]
    吴柳根,马建忠,宁学涛,等.膨胀悬挂器技术在石油工程中的应用[J].石油矿场机械,2012,41(9):59-63. WU Liugen,MA Jianzhong,NING Xuetao,et al.Expandable liner hanger technology applied in petroleum engineering[J].Oil Field Equipment,2012,41(9):59-63.
    [17]
    唐明,宁学涛,吴柳根,等.膨胀套管技术在侧钻井完井工程的应用研究[J].石油矿场机械,2009,38(4):64-68. TANG Ming,NING Xuetao,WU Liugen,et al.Application research of expandable casing in completion engineering of sidetrack wells[J].Oil Field Equipment,2009,38(4):64-68.
    [18]
    刘强,宋生印,白强,等.实体膨胀管性能评价方法研究及应用[J].石油机械,2014,42(12):39-43. LIU Qiang,SONG Shengyin,BAI Qiang,et al.Research and application of performance evaluation methods of solid expandable tubular[J].China Petroleum Machinery,2014,42(12):39-43.
    [19]
    赵新学,张庆生,王木乐,等.抗硫膨胀管力学性能及膨胀动力性能研究[J].石油机械,2014,42(12):57-60. ZHAO Xinxue,ZHANG Qingsheng,WANG Mule,et al.Study on mechanical properties of anti-hydrogen sulfide expandable tubular and expansion dynamic performance[J].China Petroleum Machinery,2014,42(12):57-60.
    • Related Articles

  • Related Articles

    [1]ZHANG Heng, YUAN Guangjie, NI Hongjian, YANG Henglin, FU Li, WANG Yuan. Experimental Study on Suppression of Stick-slip Vibration of PDC Bit by Composite Impact Load[J]. Petroleum Drilling Techniques. DOI: 10.11911/syztjs.2025007
    [2]PENG Qi, ZHOU Yingcao, ZHOU Bo, LIU Chuanfu, LIU Yu. Development and Field Test of a Non-Planar Cutter PDC Bit with Convex Ridges[J]. Petroleum Drilling Techniques, 2020, 48(2): 49-55. DOI: 10.11911/syztjs.2020035
    [3]TIAN Jingyan, XU Yuchao. Design and Field Application of a Micro-Coring PDC Bit[J]. Petroleum Drilling Techniques, 2019, 47(1): 65-68. DOI: 10.11911/syztjs.2018134
    [4]LIN Siyuan, LI Zhong, HUANG Yi, CHEN Haodong, YANG Yuhao, GAO Jiji. Technique for Enhancing the Rate of Penetration through the Application of a New PDC Bit with Rotary Cutters in Deep Formations in the Wenchang Block[J]. Petroleum Drilling Techniques, 2017, 45(6): 65-69. DOI: 10.11911/syztjs.201706012
    [5]YAN Yan, GUAN Zhichuan, XUAN Lingchao, HU Huaigang, ZHUANG Li. Experimental Study on Rock Breaking Efficiency with a PDC Bit under Conditions of Composite Percussion[J]. Petroleum Drilling Techniques, 2017, 45(6): 24-30. DOI: 10.11911/syztjs.201706005
    [6]Yang Shunhui, Wu Haojie, Niu Chengcheng, Hou Xutian, Jin Junbin. Manufacture and Application of PDC Bit Enhanced by Special Diamond-Impregnated Segment[J]. Petroleum Drilling Techniques, 2014, 42(6): 111-114. DOI: 10.11911/syztjs.201406022
    [7]Li Guangguo, Suo Zhongwei, Wang Jinrong, Zhou Yucang, Gao Changbin. Improve ROP with Hydraulic Percussion Hammer and PDC Bit in Tahe Oilfield[J]. Petroleum Drilling Techniques, 2013, 41(5): 71-75. DOI: 10.3969/j.issn.1001-0890.2013.05.014
    [8]Yang Yongyin, Niu Sicheng, Xu Xiqiang. Experimental Study of Combined-Jet PDC Bit[J]. Petroleum Drilling Techniques, 2012, 40(5): 100-105. DOI: 10.3969/j.issn.1001-0890.2012.05.022
    [9]Jin Yequan, Wang Maolin. PDC Bit Drilling Parameter Optimization Design Integrating Cost and Drilling Rate[J]. Petroleum Drilling Techniques, 2012, 40(5): 13-16. DOI: 10.3969/j.issn.1001-0890.2012.05.003
    [10]Xiao Guoyi, Hu Daliang, Liao Zhonghui, Wang Xiyong, Li Qunsheng. Parameter Optimization and Selection of PDC Bits for Xujiahe Formation in Western Sichuan[J]. Petroleum Drilling Techniques, 2012, 40(3): 28-32. DOI: 10.3969/j.issn.1001-0890.2012.03.006

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (7763) PDF downloads (8390) Cited by()
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return