Test of Constant Torque Converter while Drilling in Well TH121125

Peng Mingwang; Bai Binzhen; Wang Ke; Li Shaoan; Li Fei

doi:10.11911/syztjs.201406024

Volume 42 Issue 6

Nov. 2014

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2014 > 42(6): 120-123. > DOI: 10.11911/syztjs.201406024

Peng Mingwang, Bai Binzhen, Wang Ke, Li Shaoan, Li Fei. Test of Constant Torque Converter while Drilling in Well TH121125[J]. Petroleum Drilling Techniques, 2014, 42(6): 120-123. DOI: 10.11911/syztjs.201406024

Citation:

PDF (1072 KB)

Test of Constant Torque Converter while Drilling in Well TH121125

1.
Research Institute of Petroleum Engineering, Sinopec Northwest Oilfield Branch, Urumqi, Xinjiang, 830011, China;
2.
Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China

More Information

Received Date: May 23, 2014
Revised Date: August 06, 2014

Graphical Abstract

Abstract

Abstract

To solve drilling problems of slow penetration owing to "slimy" vibration of a PDC bit in the deep and hard formation of Block-12 in Tahe Oilfield,a test of a constant torque converter was carried out in the well section of 1 204.00-4 845.00 m of Well TH121125.Test results showed that torque fluctuation was minor and relatively stable.Compared to offset wells in the same well section,the penetration rate was improved by 20.56%-59.65%,and drilling cycle was shortened by 21.08%-41.39%.In addition,the maximum inclination angle was only 1.07°,and the hole enlargement rate was within 6.42%.Wellbore quality was clearly improved.This indicated that constant torque converter while drilling could effectively eliminate the "slimy" vibration of PDC bit,and protect drill bits and strings so as to make good deviation control and improve drilling speed.
- constant torque converter while drilling,
- rate of penetration,
- drilling cycle,
- Tahe Oilfield,
- Well TH121125

FullText(HTML)

References (11)

References

[1]	曹立迎,孙建芳,徐婷,等.碳酸盐岩油藏岩石润湿性评价实验研究[J].油气地质与采收率,2014,21(4):89-92 Cao Liying,Sun Jianfang,Xu Ting, et al.Experimmental study of wettabillty evaluation on carbonate ressrvoir rock[J].Petroleum Geology and Recovery Effciency,2014,21(4):89-92
[2]	成友友,郭春秋,王晖,复杂碳酸盐岩气藏储层类型动态综合识别方法[J].断块油气田,2014,21(3):326-329. Cheng Youyou,Guo Chenqiu,Wang Hui.Method of imtegrated dynamic identification on reservoir type of complex carbonate gas reservoir [J].Fault-Block Oil and Gas Field,2014,21(3):326-329
[3]	王成岭,李作宾,蒋金宝,等.塔河油田12区超深井快速钻井技术[J].石油钻探技术,2010,38(3):17-21. Wang Chengling,Li Zuobin,Jiang Jinbao,et al.Fast drilling tachnology on ulltra-deep wells in Block-12,Tahe Oilfield[J].Petroleum Drilling Techniquess,2010,38(3):17-21.
[4]	陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:89-91. Chen Tinggen,Guan Zhichuan.Drilling engineering theory and technology[M].Dongying:Petroleum University Press,2000:89-91.
[5]	王红波,段隆臣,杨道合.适用于硬岩的PDC全面钻头特点分析[J].矿山机械,2009,37(17):20-22. Wang Hongbo,Duan Longchen,Yang Daohe.Analysis of characteristics of PDC rock bits applied to the hard rock[J].Mining Processing Equipment,2009,37(17):20-22.
[6]	邹德永,曹继飞,袁军,等.硬地层PDC钻头切削齿尺寸及后倾角优化设计[J].石油钻探技术,2011,39(6):91-94. Zou Deyong,Cao Jifei,Yuan Jun,et al.Optimization design of the cutter size and back rake for PDC bit in hard formation[J].Petroleum Drilling Techniques,2011,39(6):91-94.
[7]	李广国,索忠伟,王金荣,等.塔河油田液动射流冲击器+PDC钻头提速技术[J].石油钻探技术,2013,41(5):71-75. Li Guangguo,Suo Zhongwei,Wang Jinrong, et al.Improve ROP with hydraulic percussion hammer and PDC bit in Tahe Oilfield[J].Petroleum Drilling Techniques,2013,41(5):71-75.
[8]	肖国益,胡大梁,廖忠会,等.川西须家河组地层PDC钻头结构参数优化及选型[J].石油钻探技术,2012,40(3):28-32. Xiao Guoyi,Hu Daliang,Liao Zhonghui,et al.Parameter,Optimization and Selection of PDC Bits for Xujiahe Formation in western Sichuan[J].Petroleum Drilling Techniques,2012,40(3):28-32.
[9]	戴金岭,温林荣,何育光,等.无反扭矩钻井装置和扭矩平衡分析[J].石油钻探技术,2008,36(1):53-56. Dai Jinling,Wen Linrong,He Yuguang,et al.An assembly without reactive torque and torque balance analysis[J].Petroleum Drilling Techniques,2008,36(1):53-56.
[10]	陈勇,陈若铭,张兴国,等.PDC钻头反扭矩分析及控制技术[J].石油矿场机械,2010,39(5):59-61. Chen Yong,Chen Ruoming,Zhang Xingguo,et al.Analysis of reactive torque on PDC and control technique[J].Oil Field Equipment,2010,39(5):59-61.
[11]	韦忠良,陈庭根.PDC钻头钻进时扭矩影响因素研究[J].石油钻探技术,1995,23(1):50-52,58. Wei Zhongliang,Chen Tinggen.Lab study of factors effecting on torque of PDC bits while drilling[J].Petroleum Drilling Techniques,1995,23(1):50-52,58.

Cited By

Cited by

Periodical cited type(5)

1.	呼怀刚，黄洪春，汪海阁，李忠明，席传明，武强，刘力. 国内外PDC钻头新进展与发展趋势展望. 石油机械. 2024(02): 1-10 .
2.	高航献，李真祥，胡彦峰. 元深1井超深井钻井提速关键技术. 石油钻探技术. 2024(03): 28-33 . 本站查看
3.	何璟彬，陈伟林，陈霖. 基于人工智能控制理论PDC钻头设计平台研发. 自动化与仪器仪表. 2020(10): 129-132+136 .
4.	查春青，陈杰，赵金成，柳贡慧. 地层硬度突增时PDC钻头黏滑振动分析. 石油机械. 2019(08): 15-20 .
5.	杨志强，李光泉，佘明军. 基于激光诱导击穿光谱的岩屑岩性在线识别试验研究. 石油钻探技术. 2019(04): 122-126 . 本站查看

Other cited types(0)

Get Citation

PDF

XML

Article Metrics

Article views PDF downloads Cited by(5)

Test of Constant Torque Converter while Drilling in Well TH121125

Abstract

References

Cited by

Periodical cited type(5)

Other cited types(0)

Catalog

Article Metrics

Related

Test of Constant Torque Converter while Drilling in Well TH121125

Abstract

References

Cited by

Periodical cited type(5)

Other cited types(0)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content