Volume 45 Issue 3
May  2017
Turn off MathJax
Article Contents
Abstract
References
Related Articles
LIU Peng, XIA Bairu, CHENG Guangming, LIU Xiaodan. The Development and Application of Restoration Device for Expandable Profile Liner Ends[J]. Petroleum Drilling Techniques, 2017, 45(3): 77-82. DOI: 10.11911/syztjs.201703014
Citation: LIU Peng, XIA Bairu, CHENG Guangming, LIU Xiaodan. The Development and Application of Restoration Device for Expandable Profile Liner Ends[J]. Petroleum Drilling Techniques, 2017, 45(3): 77-82. DOI: 10.11911/syztjs.201703014
shu

The Development and Application of Restoration Device for Expandable Profile Liner Ends

  • 1.

    College of Engineering and Technology, China University of Geosciences (Beijing), Beijing, 100083, China;

  • 2.

    Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China

More Information
  • Received Date: February 21, 2017
  • Revised Date: May 04, 2017
    Graphical Abstract
    • Abstract
  • The ends of expandable profile liners are characterized by significant differences in configurations.Unaligned butts during welding results in seam low strength.In order to improve the alignment of the ends and the stability of the weld seam,a restoration device for the expandable profile liner(EPL) has been developed.By optimizing the shaping temperature and reducing restoration force,the toughness of the EPL can be improved effectively.Through optimization of the length of the restoration section,it is possible to reduce the risk of getting stuck.An inner mold with three valves reduced the possibility of stuck risks by allocating stress.The geometric configuration of the inner mold was optimized through a stress distribution analysis.Experimental results and field application results showed that the device has the advantages of high restoration precision,reduced restoration force,reduced friction and better anti-sticking.From the initial design,the alignment of butt weld can be reduced to less than 1 mm after the restoration from 4-5 mm before the restoration resulting in a greatly improved weld stability for the end restoration.The restoration device can improve the abilityand reliability of the EPL to pack complex formations.
    • FullText(HTML)
    • References (20)
  • [1]
    刘鹏,夏柏如,陶兴华,等.基于膨胀波纹管的单一井径钻井技术[J].石油矿场机械,2015,44(1):74-78. LIU Peng,XIA Bairu,TAO Xinghua,et al.Expandable profile liner makes single-diameter wellbore[J].Oil Field Equipment,2015,44(1):74-78.
    [2]
    刘鹏,夏柏如,陶兴华,等.膨胀波纹管在大牛地气田定向井段的应用[J].石油钻探技术,2017,45(2):61-67. LIU Peng,XIA Bairu,TAO Xinghua,et al.The application of solid expandable liners in directional well sections of the Daniudi Gas Field[J].Petroleum Drilling Techniques,2017,45(2):61-67.
    [3]
    张辉,王锦昌,王翔,等.膨胀波纹管技术在大斜度井易垮塌地层的应用[J].断块油气田,2015,22(3):394-397. ZHANG Hui,WANG Jinchang,WANG Xiang,et al.Application of expandable convoluted tubing technique in easy collapsed formation of highly deviated well[J].Fault-Block Oil Gas Field,2015,22(3):394-397.
    [4]
    王玲玲,姜增所,邱贻旺,等.膨胀管技术在冀东油田大斜度井中的应用[J].石油机械,2016,44(11):68-71,79. WANG Lingling,JIANG Zengsuo,QIU Yiwang,et al.Application of expandable tubular technology on highly deviated wells in Jidong Oilfield[J].China Petroleum Machinery,2016,44(11):68-71,79.
    [5]
    陶兴华,马开华,吴波,等.膨胀波纹管技术现场试验综述及存在问题分析[J].石油钻探技术,2007,35(4):63-66. TAO Xinghua,MA Kaihua,WU Bo,et al.Summary of expandable bellows field test and existing problem analysis[J].Petroleum Drilling Techniques,2007,35(4):63-66.
    [6]
    胡彦峰,涂玉林,陶兴华.Φ149.2mm膨胀波纹管在塔河油田侧钻井的应用[J].石油机械,2013,41(1):27-30. HU Yanfeng,TU Yulin,TAO Xinghua.Application of the Φ149.2mm expandable bellows in sidetracked wells of Tahe Oilfield[J].China Petroleum Machinery,2013,41(1):27-30.
    [7]
    刘鹏,夏柏如,陶兴华,等.膨胀波纹管焊缝缺陷的检测及影响评价分析[J].科学技术与工程,2016,16(32):22-27. LIU Peng,XIA Bairu,TAO Xinghua,et al.Weld defects detection and weld’s performance evaluation of solid expandable profile liner technology[J].Science Technology and Engineering,2016,16(32):22-27.
    [8]
    陶兴华,朱宏武,曾义金,等.膨胀波纹管焊接机器人的研制及其机构运动分析[J].中国石油大学学报(自然科学版),2011,35(4):119-122. TAO Xinghua,ZHU Hongwu,ZENG Yijin,et al.Development and mechanism motion analysis of welding robot for expandable profile liner[J].Journal of China University of Petroleum(Edition of Natural Science),2011,35(4):119-122.
    [9]
    TAKHAUTDINOV S F,IBRAGIMOV N G,IBATULLIN R,et al.Mitigating drilling hazards with solid expandable profile liners[J].World Oil,2009,230(7):1-11.
    [10]
    陶兴华,朱宏武,张宏,等.波纹管成型及膨胀过程力学性能分析[J].石油机械,2011,39(3):12-15. TAO Xinghua,ZHU Hongwu,ZHANG Hong,et al.An analysis of the mechanical properties of the forming and expansion process of the bellows[J].China Petroleum Machinery,2011,39(3):12-15.
    [11]
    张鹏辉.石油套管电磁整形过程的受力分析[D].西安:西北大学,2011:13-18. ZHANG Penghui.Force analysis of electromagnetic shaping process for oil casing[D].Xi’an:Northwestern University,2011:13-18.
    [12]
    张洪宝.辽河油田高效液压套管整形工具的研制与应用[J].石油钻探技术,2016,44(3):101-104. ZHANG Hongbao.The development and application of a high efficiency hydraulic casing restoration tool[J].Petroleum Drilling Techniques,2016,44(3):101-104.
    [13]
    翟晓鹏,楼一珊,周建良,等.套管径向变形可修复界限研究[J].石油钻探技术,2012,40(1):28-31. ZHAI Xiaopeng,LOU Yishan,ZHOU Jianliang,et al.Study of minimum repair limit for reduced casing deformation[J].Petroleum Drilling Techniques,2012,40(1):28-31.
    [14]
    林元华,邓宽海,曾德智,等.套管整形用梨形胀管器的参数优化实验[J].天然气工业,2014,34(2):71-75,80. LIN Yuanhua,DENG Kuanhai,ZENG Dezhi,et al.An experimental investigation intoparameters optimization of reshaping casing by pear-shaped casing swage[J].Natural Gas Industry,2014,34(2):71-75,80.
    [15]
    王国栋.新一代控制轧制和控制冷却技术与创新的热轧过程[J].东北大学学报(自然科学版),2009,30(7):913-922. WANG Guodong.New generation TMCP and innovative hot rolling process[J].Journal of Northeastern University( Natural Science),2009,30(7):913-922.
    [16]
    刘晓丹,张海平,陶兴华.热处理和振动时效复合法消除膨胀波纹管残余应力[J].热加工工艺,2015,44(6):189-192. LIU Xiaodan,ZHANG Haiping,TAO Xinghua.Composition of heat treatment and vibratory stress relief on elimination of residual stress of expandable corrugated pipe[J].Hot Working Technology,2015,44(6):189-192.
    [17]
    GINER E,SUKUMAR N,TARANCON J E,et al.An ABAQUS implementation of the extended finite element[J].Engineering Fracture Mechanics,2009,76(3):347-368.
    [18]
    REMMERS J J C,de BORST R,NEEDLEMAN A.The simulation of dynamic crack propagation using the cohesive segments method[J].Journal of the Mechanics and Physics of Solids,2008,56(1):70-92.
    [19]
    陈晓君,宋刚,孟庆鸿,等.小口径勘探用可膨胀波纹管ANSYS模拟与实验分析[J].探矿工程(岩土钻掘工程),2014,41(11):37-40,45. CHEN Xiaojun,SONG Gang,MENG Qinghong,et al.ANSYS simulation of expandable convoluted tubing for small diameter bore prospecting and experimental analysis[J].Exploration Engineering (Rock Soil Drilling and Tunneling),2014,41(11):37-40,45.
    [20]
    关舒伟,李春福,李学艺,等.非均匀外挤压力作用下内径偏磨套管的应力分析[J].石油钻探技术,2009,37(2):38-40. GUAN Shuwei,LI Chunfu,LI Xueyi,et al.Stress analysis of worn casing under heterogeneous external pressure[J].Petroleum Drilling Techniques,2009,37(2):38-40.
    • Related Articles

  • Related Articles

    [1]YANG Kunpeng, LI Pengxiao, AO Kangwei, ZHANG Tianyi, XIA Yuanbo, HOU Wei. Ultra-Low Density and Low-Friction Cement Slurry Cementing Technologies in Long Sealing Sections of Fuman Oilfield[J]. Petroleum Drilling Techniques, 2023, 51(6): 64-70. DOI: 10.11911/syztjs.2023060
    [2]WANG Jianyun, ZHANG Hongwei, ZOU Shuqiang, LI Mingjun, WANG Peng. Foamed Cement Slurry Cementing Technology for Low-Pressure and Leakage-ProneLayers of the Shunbei Oil & Gas Field[J]. Petroleum Drilling Techniques, 2022, 50(4): 25-30. DOI: 10.11911/syztjs.2022075
    [3]KUANG Lixin, TAO Qian. Cementing Technology Using a Nitrogen-Filled Foamed Cement Slurry for Horizontal Shale Gas Wells in the Eastern Chongqing Area[J]. Petroleum Drilling Techniques, 2022, 50(3): 39-45. DOI: 10.11911/syztjs.2021103
    [4]WU Tianqian, SONG Wenyu, TAN Lingfang, ZHANG Junyi, YANG Chunwen, GUO Shenglai. Evaluation Method for Cementing Quality of Ultra-Low-Density Cement[J]. Petroleum Drilling Techniques, 2022, 50(1): 65-70. DOI: 10.11911/syztjs.2021111
    [5]JIA Guangliang, SHAO Tong, YIN Xiaoxia, JIANG Shangming, XU Wensi, WANG Yuzhu. Volumetric Fracturing with Mixed Water in Tight Gas Reservoirsin the Hangjinqi Block[J]. Petroleum Drilling Techniques, 2019, 47(2): 87-92. DOI: 10.11911/syztjs.2018143
    [6]SHI Bingzhong, XIE Chao, LI Sheng, LIU Jinhua, CHEN Xiaofei. Development and Application of Drilling Fluid in the Jin-58 Well Block of the Hangjinqi Block[J]. Petroleum Drilling Techniques, 2017, 45(6): 37-41. DOI: 10.11911/syztjs.201706007
    [7]SU Le, GUO Lei, LIU Zhaohua. Low-Density Micro-Foam Drilling Fluid Technology Deployed in Benacat Block, Indonesia[J]. Petroleum Drilling Techniques, 2016, 44(1): 18-22. DOI: 10.11911/syztjs.201601004
    [8]Bu Yuhuan, Song Wenyu, He Yingjun, Shen Zhaochao. Discussion of a Method for Evaluating Cementing Quality with Low-Density Cement Slurries[J]. Petroleum Drilling Techniques, 2015, 43(5): 49-55. DOI: 10.11911/syztjs.201505009
    [9]Sun Kunzhong, Tao Qian, Zhou Shiming, Gao Yuan. Cementing Technology for Deep Shale Gas Horizontal Well in the Dingshan Block[J]. Petroleum Drilling Techniques, 2015, 43(3): 55-60. DOI: 10.11911/syztjs.201503011
    [10]Zhang Jinhong. Key Drilling Completion Techniques for Shale Gas Horizontal Wells in Pengshui Block[J]. Petroleum Drilling Techniques, 2013, 41(5): 9-15. DOI: 10.3969/j.issn.1001-0890.2013.05.002

  • Cited by

    Periodical cited type(14)

    1. 陈雅辉，匡立新，龙志平，陈士奎，王恒. NC页岩气田东胜构造带浅表层防漏治漏工艺. 石油地质与工程. 2023(03): 102-105 .
    2. 陆长青，高元，杨广国，彭金龙. 基于温敏形状记忆聚合物的堵漏水泥浆体系研究. 钻采工艺. 2023(03): 141-146 .
    3. 曾义金. 中国石化深层超深层油气井固井技术新进展与发展建议. 石油钻探技术. 2023(04): 66-73 . 本站查看
    4. 吴天乾，宋文宇，谭凌方，张军义，杨春文，郭胜来. 超低密度水泥固井质量评价方法. 石油钻探技术. 2022(01): 65-70 . 本站查看
    5. 谢关宝. 轻质水泥浆固井质量测井评价标准构建. 石油钻探技术. 2022(01): 119-126 . 本站查看
    6. 袁光杰，付利，王元，郭凯杰，陈刚. 我国非常规油气经济有效开发钻井完井技术现状与发展建议. 石油钻探技术. 2022(01): 1-12 . 本站查看
    7. 匡立新，刘奎，丁士东，初永涛，周仕明，姜政华，肖京男. 机械充氮泡沫水泥浆固井技术在页岩气井的应用. 石油机械. 2022(07): 26-33 .
    8. 王建云，张红卫，邹书强，李明军，王鹏. 顺北油气田低压易漏层泡沫水泥浆固井技术. 石油钻探技术. 2022(04): 25-30 . 本站查看
    9. 路飞飞，于洋，王伟志，李明军. 顺北油气田防漏固井用封隔式分级箍研制与应用. 石油钻探技术. 2022(04): 31-36 . 本站查看
    10. 陈晓华，狄伟. 针对裂缝性地层的低密度高强度韧性水泥浆体系研究. 钻井液与完井液. 2021(01): 109-115 .
    11. 吴天乾，李明忠，李建新，李德红，张军义，何斌斌. 杭锦旗地区正注反挤固井技术研究. 钻采工艺. 2021(03): 104-107 .
    12. 张辉. 超低密度水泥浆的复合减轻剂研究及应用. 重庆科技学院学报(自然科学版). 2020(03): 7-10+43 .
    13. 陈铧. 封固气层的泡沫水泥浆固井技术研究. 中国石油和化工标准与质量. 2019(10): 213-214 .
    14. 林四元，张杰，韩成，胡杰，田宗强，郑浩鹏. 东方气田浅部储层大位移水平井钻井关键技术. 石油钻探技术. 2019(05): 17-21 . 本站查看

    Other cited types(2)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (5838) PDF downloads (5113) Cited by(16)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return