Citation: | CAI Mingjie, LUO Xin, CHEN Lili, et al. Ultra-Large borehole drilling technologies of ten-thousand-meter deep well SDCK1 [J]. Petroleum Drilling Techniques,2024, 52(2):87-92. DOI: 10.11911/syztjs.2024030 |
In the drilling process of the upper ultra-large borehole of 10 000-meter deep well SDCK1, there are five major technical challenges such as high safety risk of drilling tool, low cleaning efficiency of borehole, difficult quality control of wellbore, fast wear of polycrystalline diamond compact (PDC) bit, and hard ultra-large casing running. To address these challenges, the research on drilling tool safety guarantee technology, optimization of ultra-large borehole cleaning, development of High flow rate and erosion-resistance inclinometer, selection of “personalized PDC bit + high-torque hollow screw”, and optimization of ultra-large and overweight casing running was carried out, and the safe and efficient key drilling technologies of the ultra-large borehole of 10 000-meter deep well were formed. The technologies were applied in the ultra-large borehole of ϕ812.8 mm and ϕ593.7 mm of Well SDCK1 during drilling, which effectively ensured the safety of the drilling tool, borehole cleaning, and quality control of the wellbore (deviation angle is no more than 1°). In addition, single footage and rate of penetration (ROP) were effectively raised, and the ultra-large and overweight casing running to the designed position was smooth. The successful completion of the ultra-large borehole of Well SDCK1 provides a successful experience for the safe and efficient drilling of ultra-large boreholes in the Sichuan area.
[1] |
张锦宏,周爱照,成海,等. 中国石化石油工程技术新进展与展望[J]. 石油钻探技术,2023,51(4):149–158.
ZHANG Jinhong, ZHOU Aizhao, CHENG Hai, et al. New progress and prospects for Sinopec’s petroleum engineering technologies[J]. Petroleum Drilling Techniques, 2023, 51(4): 149–158.
|
[2] |
史配铭,倪华峰,石崇东,等. 苏里格致密气藏超长水平段水平井钻井完井关键技术[J]. 石油钻探技术,2022,50(1):13–21.
SHI Peiming, NI Huafeng, SHI Chongdong, et al. Key technologiesfor drilling and completing horizontal wells with ultra-long horizontal sections in the Sulige tight gas reservoirs[J]. Petroleum Drilling Techniques, 2022, 50(1): 13–21.
|
[3] |
邓昌松,张宗谭,冯少波,等. 高含硫、大漏、超深水平井钻完井技术:以塔里木油田中古10HC井为例[J]. 石油钻采工艺,2018,40(1):27–32.
DENG Changsong, ZHANG Zongtan, FENG Shaobo, et al. Drilling and completion technologies suitable for ultradeep horizontal wells of high sulfur content and serious circulation loss: a case study on Well 10HC of Middle Paleozoic in Tarim Oilfield[J]. Oil Drilling & Production Technology, 2018, 40(1): 27–32.
|
[4] |
孙家祥,赵洪山,马莉. 准噶尔盆地征10井超深井钻井关键技术[J]. 石油机械,2023,51(5):17–24.
SUN Jiaxiang, ZHAO Hongshan, MA Li. Key drilling technologies for ultra-deep well Zheng 10 in Junggar Basin[J]. China Petroleum Machinery, 2023, 51(5): 17–24.
|
[5] |
曾义金. 中国石化深层超深层油气井固井技术新进展与发展建议[J]. 石油钻探技术,2023,51(4):66–73.
ZENG Yijin. Novel advancements and development suggestions of cementing technologies for deep and ultra-deep wells of Sinopec[J]. Petroleum Drilling Techniques, 2023, 51(4): 66–73.
|
[6] |
陈超峰,刘新宇,李雪彬,等. 准噶尔盆地呼探 1 井高温高压超深井试油测试技术[J]. 石油钻采工艺,2023,45(4):447–454.
CHEN Chaofeng, LIU Xinyu, LI Xuebin, et al. High-temperature, high-pressure & ultra-deep well testing technology used in Well Hutan 1 in the Junggar Basin[J]. Oil Drilling & Production Technology, 2023, 45(4): 447–454.
|
[7] |
邢希金,王涛,刘伟,等. 超深大位移井井壁稳定及储层保护技术与应用[J]. 中国海上油气,2023,35(5):154–163.
XING Xijin, WANG Tao, LIU Wei, et al. Research and application of drilling risk prevention and control measures in ultra-deep extended-reach wells[J]. China Offshore Oil and Gas, 2023, 35(5): 154–163.
|
[8] |
练章华,万智勇,吴彦先,等. 超深井卡瓦悬挂器套管力学强度有限元分析[J]. 石油机械,2023,51(9):1–8.
LIAN Zhanghua, WAN Zhiyong, WU Yanxian, et al. Finite element analysis on mechanical strength of casing at slip hanger in ultra-deep wells[J]. China Petroleum Machinery, 2023, 51(9): 1–8.
|
[9] |
郑振国,黎红胜,赵海艳,等. 哥伦比亚Matambo区块深井钻井关键技术[J]. 石油钻探技术,2018,46(2):30–37.
ZHENG Zhenguo, LI Hongsheng, ZHAO Haiyan, et al. Key techniques for deep well drilling optimization in the Block Matambo, Colombia[J]. Petroleum Drilling Techniques, 2018, 46(2): 30–37.
|
[10] |
张峰,罗少成,李震,等. 四川盆地茅口组岩溶缝洞型储层有效性测井评价[J]. 石油钻探技术,2020,48(6):116–122.
ZHANG Feng, LUO Shaocheng, LI Zhen, et al. Logging evaluation on the effectiveness of Karst fractured-vuggy reservoirs in the Maokou Formation, Sichuan Basin[J]. Petroleum Drilling Techniques, 2020, 48(6): 116–122.
|
[11] |
张正玉,袁军,李阳兵. 高强度高温高压直推存储式测井系统在超深井的应用[J]. 石油钻探技术,2022,50(5):117–124.
ZHANG Zhengyu, YUAN Jun, LI Yangbing. Application of rigid HTHP pipe-conveyed memory logging system in ultra-deep wells[J]. Petroleum Drilling Techniques, 2022, 50(5): 117–124.
|
[12] |
米光勇,袁和义,王强,等. 西南石油大学学报(自然科学版),2021,43(4):62–70.
MI Guangyong, YUAN Heyi, WANG Qiang, et al. A study on deep well deviation in Shuangyushi Block, Sichuan Basin[J]. Joural of Southwest Petroleum University(Science & Technology Edition), 2021, 43(4): 62–70.
|
[13] |
艾白布•阿不力米提,庞德新,王一全,等. 连续油管打捞连续油管关键工具研究与应用[J]. 石油钻探技术,2019,47(6):89–95.
AIBAIBU Abulimit, PANG Dexin, WANG Yiquan, et al. The research and application of a key tool for coiled tubing fishing with coiled tubing[J]. Petroleum Drilling Techniques, 2019, 47(6): 89–95.
|
[14] |
石秉忠,张栋,褚奇. 松南气田泥岩井壁失稳形式及失稳机制的微观数字化分析[J]. 石油钻探技术,2023,51(1):22–33. doi: 10.11911/syztjs.2023005
SHI Bingzhong, ZHANG Dong, CHU Qi. Micro digital analysis on instability form and mechanism of mudstone borehole wall in Songnan Gas Field[J]. Petroleum Drilling Techniques, 2023, 51(1): 22–33. doi: 10.11911/syztjs.2023005
|
[15] |
张建龙,李瑞刚,温炜,等. 提高MWD仪器在特深小井眼水平井测量可靠性的方法[J]. 石油钻采工艺,2022,44(4):430–435.
ZHANG Jianlong, LI Ruigang, WEN Wei, et al. Methods to improve MWD measurement reliability in ultra-deep horizontal slim-holes[J]. Oil Drilling & Production Technology, 2022, 44(4): 430–435.
|
[16] |
刘奕呈,李玉梅,张涛,等. 基于CEEMDAN-CNN的钻头磨损状态监测研究[J]. 石油机械,2022,50(9):59–65.
LIU Yicheng, LI Yumei, ZHANG Tao, et al. Monitoring of bit wear based on CEEMDAN-CNN[J]. China Petroleum Machinery, 2022, 50(9): 59–65.
|
[17] |
丁建新,席岩,姚宇,等. 多级压裂套管偏心条件下微环隙发展规律研究[J]. 石油机械,2023,51(12):85–92.
DING Jianxin, XI Yan, YAO Yu, et al. Development law of micro-annulus under eccentric conditions of casing in multistage fracturing[J]. China Petroleum Machinery, 2023, 51(12): 85–92.
|
[18] |
CAI Mingjie , MAO Liangjie, XING Xuesong, et al. Analysis on the nonlinear lateral vibration of drillstring in curved wells with beam finite element[J]. Communications in Nonlinear Science and Numerical Simulation, 2021, 104(2): 106065.
|
[19] |
CAI Mingjie, TAN Leichuan, TAN Bin, et al. Experimental and numerical study on the dynamic characteristics of full-size PDC bit[J]. Mechanical Systems and Signal Processing, 2023, 200(2): 110560. doi: 10.1016/j.ymssp.2023.110560
|
[20] |
CAI Mingjie, MAO Dan, LI Xia, et al. Downhole vibration characteristics of 3D curved well under drillstring-bit-rock interaction[J]. International Journal of Non-Linear Mechanics, 2023, 154(8): 104430. doi: 10.1016/j.ijnonlinmec.2023.104430
|
[21] |
李少安,王居贺,秦垦,等. 超深井上部大尺寸井眼稳定器接头母扣失效机制[J]. 石油钻采工艺,2021,43(3):302–308.
LI Shaoan, WANG Juhe, QIN Ken, et al. Study on the failure mechanism of large-size hole stabilizer joint of ultra-deep well[J]. Oil Drilling & Production Technology, 2021, 43(3): 302–308.
|
[22] |
袁国栋,王鸿远,陈宗琦,等. 塔里木盆地满深1井超深井钻井关键技术[J]. 石油钻探技术,2020,48(4):21–27.
YUAN Guodong, WANG Hongyuan, CHEN Zongqi, et al. Key drilling technologies for the ultra-deep well Manshen 1 in the Tarim Basin[J]. Petroleum Drilling Techniques, 2020, 48(4): 21–27.
|
[23] |
祝效华,李文哲,李柯,等. 基于管柱动力学的特深井通井组合刚度评价方法与应用[J]. 钻采工艺,2024,47(2):51–58.
ZHU Xiaohua, LI Wenzhe, LI Ke, et al. Stiffness evaluation method and application of BHA for wiper trip in ultra-deep well based on pipe[J]. Drilling & Production Technology, 2024, 47(2): 51–58.
|
[1] | SUN Huan, ZHU Mingming, YANG Yongping, WANG Weiliang, WANG Kai, ZHAO Xiangyang. Comprehensive Leakage Control Technology for Shale Gas Wells in Western Margin Thrust Zone of Ordos Basin[J]. Petroleum Drilling Techniques, 2025, 53(1): 49-54. DOI: 10.11911/syztjs.2024117 |
[2] | SHI Peiming, NI Huafeng, HE Huifeng, SHI Chongdong, LI Luke, ZHANG Yanbing. Key Technologies for Safe Drilling in Horizontal Section of Deep Coal Rock Gas Horizontal Well in Ordos Basin[J]. Petroleum Drilling Techniques, 2025, 53(1): 17-23. DOI: 10.11911/syztjs.2024112 |
[3] | ZHAO Zhenfeng, WANG Wenxiong, XU Xiaochen, YE Liang, LI Ming. Hydraulic Fracturing Technology for Deep Marine Shale Gas in Ordos Basin[J]. Petroleum Drilling Techniques, 2023, 51(5): 23-32. DOI: 10.11911/syztjs.2023081 |
[4] | ZHANG Kuangsheng, QI Yin, XUE Xiaojia, TAO Liang, CHEN Wenbin, WU An’an. CO2 Regional Enhanced Volumetric Fracturing Technology for Shale Oil Horizontal Wells in Ordos Basin[J]. Petroleum Drilling Techniques, 2023, 51(5): 15-22. DOI: 10.11911/syztjs.2023091 |
[5] | ZHANG Jinping, NI Huafeng, SHI Peiming. Safe and Efficient Drilling in Presalt High-Sulfur Reservoirs in the Eastern Gas Fields of Ordos Basin[J]. Petroleum Drilling Techniques, 2023, 51(3): 22-29. DOI: 10.11911/syztjs.2023073 |
[6] | ZHAO Zhenfeng, LI Kai, ZHAO Pengyun, TAO Liang. Practice and Development Suggestions for Volumetric Fracturing Technology for Shale Oil in the Ordos Basin[J]. Petroleum Drilling Techniques, 2021, 49(4): 85-91. DOI: 10.11911/syztjs.2021075 |
[7] | HE Zuqing, LIANG Chengchun, PENG Hanxiu, ZHU Ming, HE Tong. Research and Tests on Horizontal Well Smart Layering Exploiting Technology in Tight Oil Reservoirs in Southern Ordos Basin[J]. Petroleum Drilling Techniques, 2017, 45(3): 88-94. DOI: 10.11911/syztjs.201703016 |
[8] | WANG Guangtao, XU Chuangchao, CAO Zongxiong, GUO Xiaoyong. A Sand Control Downhole Fracturing Technique for Tight Reservoir Development in the Ordos Basin[J]. Petroleum Drilling Techniques, 2016, 44(5): 84-89. DOI: 10.11911/syztjs.201605014 |
[9] | Qin Jinli, Chen Zuo, Yang Tongyu, Dai Wenchao, Wu Chunfang. Technology of Staged Fracturing with Multi-Stage Sleeves for Horizontal Wells in the Ordos Basin[J]. Petroleum Drilling Techniques, 2015, 43(1): 7-12. DOI: 10.11911/syztjs.201501002 |
[10] | Guo Wenmeng, Dang Donghong, Zhu Zexin, Xu Minghui, Chen Guang, Huang Xia. Cementing Techniques of Mono-Bore Well Completion in Yishan Slope of Ordos Basin[J]. Petroleum Drilling Techniques, 2014, 42(4): 75-78. DOI: 10.3969/j.issn.1001-0890.2014.04.014 |
1. |
李凯凯,安然,瞿春,王毅,贺红云. 超低渗透油藏暂堵压裂技术优化研究. 石油化工应用. 2023(11): 44-47+67 .
![]() | |
2. |
张旺,吕永国,李忠宝,谢琳,邓建华. 绳结暂堵塞性能研究及现场应用. 中外能源. 2022(12): 63-69 .
![]() | |
3. |
张笑言. 低产油气井强制裂缝转向重复压裂技术. 化学工程与装备. 2022(12): 123-124+138 .
![]() | |
4. |
李德旗,朱炬辉,张俊成,石孝志,李军龙,邹清腾,张权,胡洋. 页岩气水平井选择性分簇压裂工艺先导性试验——以昭通国家级页岩气示范区为例. 天然气工业. 2021(S1): 133-137 .
![]() | |
5. |
邴艳炜. 低产油气井重复压裂技术. 化学工程与装备. 2021(04): 143+120 .
![]() | |
6. |
周丹,熊旭东,何军榜,董波,贺勇. 低渗透储层多级转向压裂技术. 石油钻探技术. 2020(01): 85-89 .
![]() | |
7. |
李春月,房好青,牟建业,黄燕飞,胡文庭. 碳酸盐岩储层缝内暂堵转向压裂实验研究. 石油钻探技术. 2020(02): 88-92 .
![]() | |
8. |
夏海帮. 页岩气井双暂堵压裂技术研究与现场试验. 石油钻探技术. 2020(03): 90-96 .
![]() | |
9. |
蔡卓林,赵续荣,南荣丽,陈华生,李秀辉,梁天博. 暂堵转向结合高排量体积重复压裂技术. 断块油气田. 2020(05): 661-665 .
![]() | |
10. |
孟祥灿. 大情字井油田A区块重复压裂增产技术. 油气井测试. 2020(05): 44-49 .
![]() | |
11. |
郭睿,于瑾,毕青,李新发. 玉门油田深井重复压裂技术研究与应用. 中国石油和化工标准与质量. 2020(22): 190-191 .
![]() | |
12. |
张子麟,陈勇,张全胜,李爱山,张潦源,李明,黄波. 致密砂砾岩压裂裂缝遇砾扩展模式的数值模拟研究. 油气地质与采收率. 2019(04): 132-138 .
![]() | |
13. |
蒋建方,翟晓鹏,贺甲元,耿宇迪,崔佳,魏攀峰. 绒囊暂堵剂在深层碳酸盐岩储层转向压裂中的应用. 天然气工业. 2019(12): 81-87 .
![]() |