Volume 50 Issue 2
Apr.  2022
Turn off MathJax
Article Contents
Abstract
References
Related Articles
WEI Liao. Development and Performance Evaluation of a Graphene ReinforcedAluminum-Based Soluble Ball Seat[J]. Petroleum Drilling Techniques, 2022, 50(2): 113-117. DOI: 10.11911/syztjs.2021134
Citation: WEI Liao. Development and Performance Evaluation of a Graphene ReinforcedAluminum-Based Soluble Ball Seat[J]. Petroleum Drilling Techniques, 2022, 50(2): 113-117. DOI: 10.11911/syztjs.2021134
shu

Development and Performance Evaluation of a Graphene ReinforcedAluminum-Based Soluble Ball Seat

  • 1.

    Sinopec Research Institute of Petroleum Engineering, Beijing, 102206, China

  • 2.

    College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing, 100029, China

  • 3.

    State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development, Beijing, 102206, China

More Information
  • Received Date: December 02, 2020
  • Revised Date: November 24, 2021
  • Available Online: December 26, 2021
    Graphical Abstract
    • Abstract
  • The re-entry of tools in horizontal wells can be negativelly affected by problems in removing the ball seat in multistage ball-drop sliding sleeves such as low drilling efficiency and incomplete removal. In order to overcome that, a graphene reinforced aluminum-based composite was developed to make soluble ball seat with sliding sleeve. By using graphene and silicon carbide ceramic particles and with powder metallurgy, a graphene reinforced aluminum-based composite was obtained. The composite possess characteristics of high strength, high hardness and self- rapid dissolution in saline environment, with yield strength of 469 MPa and surface hardness up to 170 HBW. The soluble ball seat made of graphene-reinforced aluminum-based composite could still maintain sealing and pressure-bearing capacity when eroded by sand-containing fracturing fluid with a sand ratio of 30% at a flow rate of 4 m3/min for 26 hrs, and its overall weight was only reduced by 2.1%. In addition, the ball seat could completely be dissolved in the 4% KCl solution at 90 ℃ when soaked in the solution for 32.5 hrs. The field test showed that the developed graphene reinforced aluminum-based soluble ball seat could satisfy the requirements of multistage sliding sleeve fracturing with high flow rate, high sand ratio and long operation time. After fracturing, the ball seat can dissolve by itself in downhole liquid environment to achieve a full-diameter borehole. The developed graphene reinforced aluminum-based soluble ball seat can provide clean and safe wellbore conditions for the second stimulation of the reservoir.
    • FullText(HTML)
    • References (11)
  • [1]
    赵振峰,李楷,赵鹏云,等. 鄂尔多斯盆地页岩油体积压裂技术实践与发展建议[J]. 石油钻探技术,2021,49(4):85–91. doi: 10.11911/syztjs.2021075

    ZHAO Zhenfeng, LI Kai, ZHAO Pengyun, et al. Practice and development suggestions for volumetric fracturing technology for shale oil in the Ordos Basin[J]. Petroleum Drilling Techniques, 2021, 49(4): 85–91. doi: 10.11911/syztjs.2021075
    [2]
    张红杰,刘欣佳,张潇,等. 煤系储层综合开发中的压裂射孔方案优化研究[J]. 特种油气藏,2021,28(1):154–160.

    ZHANG Hongjie, LIU Xinjia, ZHANG Xiao, et al. Study on the optimization of the fracturing perforation scheme in the comprehensive development of coal-bearing reservoirs[J]. Special Oil & Gas Reservoirs, 2021, 28(1): 154–160.
    [3]
    任国富,赵粉霞,冯长青,等. 套管球座压裂工具研制与试验[J]. 钻采工艺,2017,40(5):76–77,80. doi: 10.3969/J.ISSN.1006-768X.2017.05.23

    REN Guofu, ZHAO Fenxia, FENG Changqing, et al. Development and trial of casing ball-seat fracturing tool[J]. Drilling & Production Technology, 2017, 40(5): 76–77,80. doi: 10.3969/J.ISSN.1006-768X.2017.05.23
    [4]
    杨同玉,魏辽,李强,等. 全自溶分段压裂滑套的研制与应用[J]. 特种油气藏,2019,26(3):153–157. doi: 10.3969/j.issn.1006-6535.2019.03.029

    YANG Tongyu, WEI Liao, LI Qiang, et al. Development and application of fully auto-soluble multi-stage fracturing sliding sleeve[J]. Special Oil & Gas Reservoirs, 2019, 26(3): 153–157. doi: 10.3969/j.issn.1006-6535.2019.03.029
    [5]
    刘恩洋,于思荣,纪志康,等. 漂珠/镁合金复合材料可溶压裂球的制备及组织性能研究[J]. 稀有金属,2019,43(8):792–799.

    LIU Enyang, YU Sirong, JI Zhikang, et al. Preparation, microstructure and properties of fly ash cenosphere/Mg alloy composites for degradable fracturing ball applications[J]. Chinese Journal of Rare Metals, 2019, 43(8): 792–799.
    [6]
    郭鸣,詹鸿运,冯强,等. 高强度可溶桥塞结构设计与应用[J]. 石油钻采工艺,2020,42(1):52–55,61.

    GUO Ming, ZHAN Hongyun, FENG Qiang, et al. Design and application of high-strength dissolvable bridge plug[J]. Oil Drilling & Production Technology, 2020, 42(1): 52–55,61.
    [7]
    安杰,唐梅荣,张矿生,等. 致密油水平井全可溶桥塞体积压裂技术评价与应用[J]. 特种油气藏,2019,26(5):159–163. doi: 10.3969/j.issn.1006-6535.2019.05.027

    AN Jie, TANG Meirong, ZHANG Kuangsheng, et al. Evaluation and application of volume fracturing with full-soluble plug in tight oil horizontal well[J]. Special Oil & Gas Reservoirs, 2019, 26(5): 159–163. doi: 10.3969/j.issn.1006-6535.2019.05.027
    [8]
    钟森,谭明文,赵祚培,等. 永川深层页岩气藏水平井体积压裂技术[J]. 石油钻采工艺,2019,41(4):529–533.

    ZHONG Sen, TAN Mingwen, ZHAO Zuopei, et al. Volume fracturing for horizontal wells in Yongchuan deep shale gas reservoirs[J]. Oil Drilling & Production Technology, 2019, 41(4): 529–533.
    [9]
    钟林,冯桂弘,朱和明,等. 压裂球座结构优化分析及耐冲蚀研究[J]. 表面技术,2021,50(6):213–219,228.

    ZHONG Lin, FENG Guihong, ZHU Heming, et al. Structural optimization analysis and erosion resistance study of frac ball seat[J]. Surface Technology, 2021, 50(6): 213–219,228.
    [10]
    邹高鹏,贺显聪,孙滨洲,等. 微纳石墨烯片增强铝合金的力学性能及其机理[J]. 中国有色金属学报,2017,27(11):2228–2235.

    ZOU Gaopeng, HE Xiancong, SUN Binzhou, et al. Mechanics performances and mechanism of aluminum alloy reinforced by graphene nanosheets[J]. The Chinese Journal of Nonferrous Metals, 2017, 27(11): 2228–2235.
    [11]
    赵乃勤,刘兴海,蒲博闻. 多维度碳纳米相增强铝基复合材料研究进展[J]. 金属学报,2019,55(1):1–15. doi: 10.11900/0412.1961.2018.00456

    ZHAO Naiqin, LIU Xinghai, PU Bowen. Progress on multi-dimensional carbon nanomaterials reinforced aluminum matrix composites: a review[J]. Acta Metallurgica Sinica, 2019, 55(1): 1–15. doi: 10.11900/0412.1961.2018.00456
    • Related Articles

  • Related Articles

    [1]WU Zebing, YUAN Ruofei, ZHANG Wenxi, LIU Jiale. Optimization Design of Interface Structure for PDC Composite Sheets Based on Multi-Objective Genetic Algorithms[J]. Petroleum Drilling Techniques, 2024, 52(4): 24-33. DOI: 10.11911/syztjs.2024068
    [2]WANG Weiji. Preparation and Performance Evaluations of an Ultra-low Permeability Film-Forming Agent Based on Graphene Modification[J]. Petroleum Drilling Techniques, 2021, 49(1): 59-66. DOI: 10.11911/syztjs.2020104
    [3]CHEN Zhongshuai, WU Zhonghua, SI Yinghui. Development and Testing of a Graphene-Modified Sponge Coring Tool[J]. Petroleum Drilling Techniques, 2020, 48(6): 71-75. DOI: 10.11911/syztjs.2020111
    [4]GENG Lidong, WANG Minsheng, JIANG Haijun, GUANG Xinjun. The Status of the Development of Graphene Applications in Petroleum Engineering[J]. Petroleum Drilling Techniques, 2019, 47(5): 80-85. DOI: 10.11911/syztjs.2019108
    [5]CHEN Lei, ZHOU Shiming, ZHAO Yan, GAO Yuan, TAN Chunqin, XU Chunhu. Study of a Thermosetting Resin-Magnesia Cement Composite for Cementing[J]. Petroleum Drilling Techniques, 2019, 47(2): 74-80. DOI: 10.11911/syztjs.2019011
    [6]LIU Wentang, GUO Jianhua, LI Wuchen, JU Liuzhu, LI Bin. The Development and Application of a Microsphere Gel Composite Plugging Agents[J]. Petroleum Drilling Techniques, 2016, 44(2): 34-39. DOI: 10.11911/syztjs.201602006
    [7]Lou Chenyang, Yao Xiao, He Deqing, Yu Sanyue, Han Yuanyuan, Zhang Pengwei. The Reinforcing Effect of Calcium-Based Whisker in High-Temperature Sand-Cement Mixtures[J]. Petroleum Drilling Techniques, 2015, 43(4): 91-95. DOI: 10.11911/syztjs.201504016
    [8]Qin Jinli, Wu Jihao, Cui Xiaojie, Li Fuping, Zou Chuanyuan. Key Technology on Ball-Activated Sleeve for Open Hole Staged Fracturing[J]. Petroleum Drilling Techniques, 2014, 42(5): 52-56. DOI: 10.11911/syztjs.201405009
    [9]Zhang Hao. Application of Aluminum-Amine Drilling Fluid in Well Xia 1031HF[J]. Petroleum Drilling Techniques, 2013, 41(2): 59-64. DOI: 10.3969/j.issn.1001-0890.2013.02.012

  • Cited by

    Periodical cited type(6)

    1. 李朋，张艳玉，孙晓飞，李冬冬，刘洋，陈会娟. SAGD循环预热割缝筛管参数影响规律研究. 工程热物理学报. 2020(04): 940-947 .
    2. 薛衡，黄祖熹，王贺华，安永生，刘榧，成一，何冰，刘卡. Ahdeb油田水平井控水完井及一体化耦合模型. 石油与天然气地质. 2019(02): 423-429 .
    3. 李朋，张艳玉，孙晓飞，陈会娟，刘洋. 稠油油藏双管水平井注汽井筒参数预测新模型. 特种油气藏. 2019(04): 85-90 .
    4. 李朋，张艳玉，孙晓飞，刘洋，谢孟珂，王朝，陈会娟. SAGD循环预热注汽参数影响规律数值模拟. 中南大学学报(自然科学版). 2019(11): 2896-2905 .
    5. 陈会娟，李明忠，狄勤丰，刘春苗. 多点注汽水平井井筒出流规律数值模拟. 石油学报. 2017(06): 696-704 .
    6. 徐磊. 稠油热采井防砂筛管热稳定性优化仿真分析. 北京石油化工学院学报. 2016(02): 40-45 .

    Other cited types(5)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (326) PDF downloads (60) Cited by(11)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return