HU Yongjian. New PPM Coding with Protection Time Slots for Optimizing the Drilling Fluid Pulse Signal for High Energy Efficiency[J]. Petroleum Drilling Techniques, 2018, 46(6): 118-122. DOI: 10.11911/syztjs.2018145
Citation: HU Yongjian. New PPM Coding with Protection Time Slots for Optimizing the Drilling Fluid Pulse Signal for High Energy Efficiency[J]. Petroleum Drilling Techniques, 2018, 46(6): 118-122. DOI: 10.11911/syztjs.2018145

New PPM Coding with Protection Time Slots for Optimizing the Drilling Fluid Pulse Signal for High Energy Efficiency

More Information
  • Received Date: April 12, 2018
  • Revised Date: October 03, 2018
  • In order to improve the transmission rate of downhole data and increase battery life and the frequency of drilling fluid pulser action,it is necessary to study and select the drilling fluid pulse signal coding method with high coding efficiency and energy saving efficiency.The coding efficiency and energy saving efficiency of multi-pulse position modulation(MPPM)and differential pulse position modulation(DPPM) with different number of protection time slot are calculated by high efficient pulse position modulation coding(PPM) methods. By comparing the calculation results of MPPM and DPPM,it is found that the coding efficiency of MPPM increases with the number of information and DPPM has the fixed information digits number to implement combinatorial coding.In the case that the number of bits of information to be encoded is small,DPPM has fewer bits of information to be encoded,and its encoding and decoding algorithms are easier to implement.Further,it has higher encoding and power saving efficiency.When the number of protection time slot is 2,the coding efficiency of DPPM can reach 46.2% and the energy saving efficiency can reach 84.6%.The research results show that DPPM coding with a protection time slot has high coding and energy saving efficiency,as its coding mapping method is simpler.It is an efficient coding method suitable for applying to the drilling fluid pulse signal.
  • [1]
    段友祥,张洋弘,李洪强,等.基于可信度分析的钻井液脉冲信号识别方法[J].石油钻探技术,2018,46(3):120-126.

    DUAN Youxiang,ZHANG Yanghong,LI Hongqiang,et al.A new drilling fluid pulse signal identification method based on credibility analysis[J].Petroleum Drilling Techniques,2018,46(3):120-126.
    [2]
    涂兵,李德胜,林恩怀,等.基于局部特征和相关系数的MWD泥浆脉冲信号识别[J].北京工业大学学报,2013,39(5):678-683.

    TU Bing,LI Desheng,LIN Enhuai,et al.MWD mud pulse signal waveform recognition method based on local feature and correlation coefficient[J].Journal of Beijing University of Technology,2013,39(5):678-683.
    [3]
    尚金萍,王平,陶源,等.紫外光通信中多脉冲PPM调制的性能分析[J].电子测量技术,2010,33(4):22-24

    ,44. SHANG Jinping,WANG Ping,TAO Yuan,et al.Analysis of performance about multi-pulse PPM modulation in UV communication[J].Electronic Measurement Technology,2010,33(4):22-24,44.
    [4]
    郭树旭,臧玲玲,韩明珠,等.可见光通信的间隔多脉冲位置调制[J].光学精密工程,2014,22(7):1760-1765.

    GUO Shuxu,ZANG Lingling,HAN Mingzhu,et al.Interval pulse position modulation in visible light communication[J].Optics and Precision Engineering,2014,22(7):1760-1765.
    [5]
    马爽,吴志勇,高世杰,等.改进的大气激光通信PPM调制解调系统设计[J].哈尔滨工业大学学报,2016,48(5):105-109.

    MA Shuang,WU Zhiyong,GAO Shijie,et al.Design of modified atmospheric laser communication PPM modulation-demodulation system[J].Journal of Harbin Institute of Technology,2016,48(5):105-109.
    [6]
    丁红,宋朝晖,袁鑫伟,等.哈拉哈塘超深定向井钻井技术[J].石油钻探技术,2018,46(4):30-35.

    DING Hong,SONG Zhaohui,YUAN Xinwei,et al.Drilling technology for ultra-deep directional wells in the Halahatang Area[J].Petroleum Drilling Techniques,2018,46(4):30-35.
    [7]
    王翔,王瑞和,纪国栋.井筒内钻井液连续脉冲信号传输频率相关摩阻模型[J].石油学报,2009,30(3):444-449.

    WANG Xiang,WANG Ruihe,JI Guodong.Frequency-dependent friction model for consecutive pulse signal of drilling fluid transmitting in borehole[J].Acta Petrolei Sinica,2009,30(3):444-449.
    [8]
    沈跃,苏义脑,李林,等.钻井液连续压力波差分相移键控信号的传输特性分析[J].石油学报,2009,30(4):593-597

    ,602. SHEN Yue,SU Yinao,LI Lin,et al.Analysis on transmission characteristics of differential phase shift keying signal of continuous pressure wave in drilling fluid channel[J].Acta Petrolei Sinica,2009,30(4):593-597,602.
    [9]
    沈跃,朱军,苏义脑,等.钻井液压力正交相移键控信号沿定向井筒的传输特性[J].石油学报,2011,32(2):340-345.

    SHEN Yue,ZHU Jun,SU Yinao,et al.Transmission characteristics of the drilling fluid pressure quadrature phase shift keying signal along a directional wellbore[J].Acta Petrolei Sinica,2011,32(2):340-345.
    [10]
    李传伟,杨亮,祝环芬,等.一种泥浆脉冲信号识别方法[J].测井技术,2013,37(2):187-190.

    LI Chuanwei,YANG Liang,ZHU Huanfen,et al.An identification method for mud pulse signal processing[J].Well Logging Technology,2013,37(2):187-190.
    [11]
    秦岭,杜永兴,柯熙政,等.大气激光通信中三脉冲的MPPM编译码系统的实现[J].半导体光电,2008,29(3):403-406

    ,433. QIN Ling,DU Yongxing,KE Xizheng,et al.Implementation of coding and decoding system for three-pulse MPPM in atmosphere laser communication[J].Semiconductor Optoelectronics,2008,29(3):403-406,433.
    [12]
    王家进.基于DPPM编码的EM-MWD节电技术研究[J].石油钻探技术,2013,41(6):106-109.

    WANG Jiajin.EM-MWD power saving technique based on DPPM[J].Petroleum Drilling Techniques,2013,41(6):106-109.
    [13]
    秦岭,柯熙政.一种二脉冲的MPPM编码映射方法研究[J].西安理工大学学报,2007,23(3):269-272.

    QIN Ling,KE Xizheng.A study of mapping scheme for dual-pulse MPPM[J].Journal of Xi'an University of Technology,2007,23(3):269-272.
  • Related Articles

    [1]LIU Junyi, LI Gongrang, HUANG Limin, MA Xiaoyong, XIA Ye. Research and Application of Environmental Protection Technologies for Drilling Fluid Treatment in Shengli Oilfield[J]. Petroleum Drilling Techniques, 2024, 52(3): 47-52. DOI: 10.11911/syztjs.2023110
    [2]CHEN Cunliang, MA Kuiqian, WANG Xiang, YUE Honglin, WU Xiaohui. Research on the Planar Equilibrium Displacement Based on Maximum Water Injection Efficiency[J]. Petroleum Drilling Techniques, 2021, 49(3): 124-128. DOI: 10.11911/syztjs.2021028
    [3]ZHANG Yiqun, YU Chao, CHENG Guangming, SONG Xianzhi, ZHAO Kexian. Experimental and Numerical Study of the Explosive Forming of Slotted Metal Pipes for Energy-Gathered Nesting Plugging[J]. Petroleum Drilling Techniques, 2020, 48(6): 54-60. DOI: 10.11911/syztjs.2020107
    [4]ZHANG Jilei, LUO Xianbo, HE Yifan, ZHOU Yanbin, ZHANG Wei. A New Potential Fine Trapping Technology for High Water Cut Stage in Heavy Oil Reservoirs with Bottom Water Based on Physical Properties of the Reservoir Varying over Time[J]. Petroleum Drilling Techniques, 2020, 48(4): 111-117. DOI: 10.11911/syztjs.2020021
    [5]SUN Jinsheng, XU Chengyuan, KANG Yili, ZHANG Jie. Research Progress and Development Recommendations Covering Damage Mechanisms and Protection Technologies for Tight/Shale Oil and Gas Reservoirs[J]. Petroleum Drilling Techniques, 2020, 48(4): 1-10. DOI: 10.11911/syztjs.2020068
    [6]HAN Laiju, LI Gongrang. Progress, Development Trends, and Outlook for Drilling Environmental Protection Technologies in the Shengli Oilfield[J]. Petroleum Drilling Techniques, 2019, 47(3): 89-94. DOI: 10.11911/syztjs.2019057
    [7]ZHANG Yafei, QI Shanshan, DOU Yihua. Structure and Performance Test of Super Elastic Casing Protective Nanofluidic System-Based Protective Casing Jacket[J]. Petroleum Drilling Techniques, 2018, 46(6): 54-58. DOI: 10.11911/syztjs.2018156
    [8]Chen Huijuan, Li Mingzhong, Wang Yiping, Jiarela·Nurula, Zhang Yanyu. Numerical Simulation in Steam Injection Wells for Optimizing the Distribution of Thermal Parameters in Horizontal Wells with Slotted Liners[J]. Petroleum Drilling Techniques, 2015, 43(3): 109-115. DOI: 10.11911/syztjs.201503020
    [9]Wang Jiajin. EM-MWD Power Saving Technique Based on DPPM[J]. Petroleum Drilling Techniques, 2013, 41(6): 106-109. DOI: 10.3969/j.issn.1001-0890.2013.06.021
    [10]Jiang Zengdong, Wang Guanglei, Wang Wanjun, Yue Ting, Lu Shifen. Development of Cementing Evaluation Equipment DCX for Flushing Efficiency[J]. Petroleum Drilling Techniques, 2013, 41(3): 127-129. DOI: 10.3969/j.issn.1001-0890.2013.03.025

Catalog

    Article Metrics

    Article views (7930) PDF downloads (33) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return