Coring Techniques for Buried Hill Reservoirs in Liaohe Oilfield
-
摘要: 为了提高辽河油田古潜山储层的岩心收获率及取心质量,研究了适合古潜山储层的钻井取心技术。通过分析辽河油田古潜山储层的地层特征,用排除法确定了造成单筒岩心收获率低及取心质量差的主要原因,提出了相应对策。首先,优化了取心钻头,将切削齿由原来的3~5个改为10个,采用Z3型金刚石复合片与硬质合金连接方式,设计了低冲蚀PDC钻头水眼结构。然后,改进了取心工具,增加了隐式篮式岩心爪和引心套、内筒扶正器、堵心指示器、防堵心装置,换用内壁光滑的铝合金内筒。最后,对钻压、转速、排量等取心技术参数进行了优化。辽河油田9口井的现场应用表明,机械钻速从0.55 m/h提高至2.79 m/h,岩心收获率从51.13%提高至89.97%。研究结果表明,辽河油田古潜山储层钻井取心技术能有效提高机械钻速、岩心收获率和取心质量,降低井下安全风险,可推广应用于坚硬破碎地层的取心作业中。Abstract: In order to enhance the core recovery and coring quality for buried hill reservoirs in Liaohe Oilfield,the coring solutions suitable for the buried hill reservoirs has been studied.Through analyzing the stratigraphic characteristics of buried hill reservoirs in Liaohe Oilfield,the method of exclusion was used to determine the causes of low core recovery and poor coring quality,and counter measures were put forward.First,the coring bit was optimized.Instead of 3-5 cutting teeth originally,the optimized coring bit had 10 cutting teeth made of Z3 diamond compact on cemented carbide base,and port arrangement of low erosion.Next,the coring tool was improved.An implicit basket type core catcher and cited heart shoes,inner barrel centralizer,coring jam indicator and anti-jam coring system were added to the coring tool,and the smooth aluminum alloy inner tube was used.Finally,the technical parameters of WOB,RPM,pumping rate,etc.were optimized.Field test in 9 wells of Liaohe Oilfield indicated the ROP had increased from 0.55 m/h to 2.79 m/h and the core recovery had increased from 51.13% to 89.97%.The results showed that the coring techniques for buried hill reservoirs in Liaohe Oilfield could enhance penetration rate,core recovery and coring quality,and reduce downhole security risks,which could be applied in hard,broken formation coring operation.
-
Keywords:
- buried hill reservoir /
- coring /
- coring bit /
- coring tool /
- Liaohe Oilfield
-
-
[1] 孔志刚.应用新型PDC取心钻头提高坚硬破碎地层岩心收获率[J].石油工业技术监督, 2013, 28(6):40-43. Kong Zhigang.Improving the core recovery of hard broken formation by using the new PDC coring bit[J].Technology Supervision in Petroleum Industry, 2013, 28(6):40-43. [2] Shinmoto Y, Wada K, Miyazaki E.Case study for core bit wear and its effect on core recovery and quality during deep-sea drilling expeditions[R].SPE 141979, 2011.
[3] Lbrahim Al-Sammak, Khalid Ahmed, Stananu De, et al.Coring unconsolidated formation—lower fars:a case study[R].SPE 119918, 2009.
[4] Rathmell J J, Gremley R R, Tibbitts G A.Field applications of low invasion coring[R].SPE 27045, 1994.
[5] Rathmell J J, Tibbitts G A, Gremley R B, et al.Development of a method for partially uninvaded coring in high-permeability sandstone[J][R].SPE Formation Evaluation, 1995, 10(2):65-71.
[6] Salman Zahid, Asif Khan, Asif Khalil.Application of state of the art anti-jam coring system:a case study[R].SPE 156208, 2011.
[7] Ike Nnoaham, Dave Marchall.Improving deepwater core recovery and on-site handling through strategic coring protocol[R].SPE 140628, 2010.
[8] 许俊良.疏松及破碎地层取心新技术[J].钻采工艺, 2009, 32(1):22-23, 26. Xu Junliang.New coring technology for unconsolidated and broken formation[J].Drilling Production Technology, 2009, 32(1):22-23, 26. [9] 杨甘生, 王达.科钻一井取心钻进技术研究[J].石油钻探技术, 2006, 34(3):8-11. Yang Gansheng, Wang Da.Research on coring technology in Well CCSD-1[J].Petroleum Drilling Techniques, 2006, 34(3):8-11. [10] 徐玉山.如何提高岩心收获率[J].石油钻探技术, 1996, 24(3):11-13, 55. Xu Yushan.How to improve the core rate of recovery[J].Petroleum Drilling Techniques, 1996, 24(3):11-13, 55. -
期刊类型引用(16)
1. 苏朝博. 基于构型界面控制的浅层优快钻井取心卡层方法. 石油钻采工艺. 2023(06): 661-667 . 百度学术
2. 韩成,罗鸣,刘忠宝,杨玉豪,邓文彪,周庆元. 莺琼盆地半潜式平台超高温高压钻井取心技术. 钻采工艺. 2021(04): 28-30 . 百度学术
3. 孔志刚,张鑫. 钻井取心工艺中探心的研究与应用. 科技风. 2019(24): 159 . 百度学术
4. 董晨晨. PDC取心钻头在坚硬破碎地层的切削齿排布优化研究. 内蒙古石油化工. 2019(08): 21-23 . 百度学术
5. 邓元洲,冯明,刘彬,付晓平,张伟. 钻井取心技术现状及进展. 化工设计通讯. 2019(12): 253-254 . 百度学术
6. 曹华庆,高长斌. 非常规龙马溪组和牛蹄塘组页岩取心技术. 油气藏评价与开发. 2018(02): 80-84 . 百度学术
7. 苏洋,杨立文,刘兴欣. 肯基亚克盐下油田小井眼取心技术. 石油钻采工艺. 2018(01): 58-62 . 百度学术
8. 杨立文,苏洋,孙少亮,孙磊. 深井大直径保形取心工具在冀东油田高66-30断块的应用. 钻采工艺. 2018(05): 113-115 . 百度学术
9. 李鑫淼,李宽,梁健,尹浩,王志刚,孙建华,张永勤. 复杂地层取心钻进堵心原因分析及其预防措施. 探矿工程(岩土钻掘工程). 2018(12): 12-15 . 百度学术
10. 王宏民,侯炼,苏志波,张忠强,贾凤龙,雷新超. 北部湾W6井涠洲组砂岩地层取心技术研究. 海洋石油. 2017(03): 52-56 . 百度学术
11. 和鹏飞. 渤海潜山油藏钻井配套技术的研究与应用. 海洋工程装备与技术. 2017(01): 19-24 . 百度学术
12. 霍新. 扭力冲击器在坚硬地层钻井提速技术研究. 中国石油和化工. 2016(S1): 10+6 . 百度学术
13. 梁海明,裴学良,赵波. 页岩地层取心技术研究及现场应用. 石油钻探技术. 2016(01): 39-43 . 本站查看
14. 罗军. 页岩气钻井取心技术. 辽宁化工. 2015(06): 705-707 . 百度学术
15. 孔志刚,和鹏飞,钟勇. 钻井取心中的地质录井新方法探讨. 辽宁化工. 2015(09): 1140-1141 . 百度学术
16. 吴为,令文学,司英晖. YD油田钻井取心技术难点及对策. 石油钻探技术. 2015(03): 18-22 . 本站查看
其他类型引用(5)
计量
- 文章访问数: 3163
- HTML全文浏览量: 92
- PDF下载量: 3775
- 被引次数: 21