[1] |
唐涛.地应力扰动场研究及其对人工裂缝形态的影响初探[J].油气田地面工程,2009,28(3):23-25. Tang Tao.Research of stress perturbation field and influence of artificial fracture morphology[J].Oil and Gas Field Surface Engineering,2009,28(3):23-25.
|
[2] |
蒋廷学,王欣.由瞬时停泵压力估算裂缝闭合压力的现场方法研究[J].大庆石油地质与开发,1999,18(3):42-45. Jiang Tingxue,Wang Xin.Research of fracture closure pressure estimated with method of instantaneous stop the pump pressure[J].Petroleum Geology Oilfield Development in Daqing,1999,18(3):42-45.
|
[3] |
蒋廷学,汪永利,丁云宏,等.由地面压裂施工压力资料反求储层岩石力学参数[J].岩石力学与工程学报,2004,23(14):2424-2429. Jiang Tingxue,Wang Yongli,Ding Yunhong,et al.Determination of rock mechanics parameters by pressure of surface fracturing treatment[J].Chinese Journal of Rock Mechanics and Engineering,2004,23(14):2424-2429.
|
[4] |
陈凤,罗美娥,张维平,等.大庆外围油田地应力特征及人工裂缝形态分析[J].断块油气田,2006,13(3):13-16. Chen Feng,Luo Mei’e,Zhang Weiping,et al.Terrestrial stress characteristics and artificial franture pattern analysis of Daqing periphery oilfield[J].Fault-Block Oil Gas Field,2006,13(3):13-16.
|
[5] |
王秀娟.大庆外围低渗透储层裂缝与地应力研究[J].大庆石油地质与开发,2004,23(5):88-90. Wang Xiujuan.Research of fractures and stress in daqing peripheral low permeability reservoir[J].Petroleum Geology Oilfield Development in Daqing,2004,23(5):88-90.
|
[6] |
王秀娟,赵永胜,王良书,等.大庆喇萨杏油田水力压裂人工裂缝形态研究[J].石油学报,2002,23(4):51-55. Wang Xiujuan,Zhao Yongsheng,Wang Liangshu,et al.Geometry of artificial fractures formed by hydraulic fracturing in Lasaxing Oilfield of Daqing Area[J].Acta Petrolei Sinica,2002,23(4):51-55.
|
[7] |
徐向荣,马利成,唐汝众.地应力及其在致密砂岩气藏压裂开发中的应用[J].钻采工艺,2000,23(6):17-21. Xu Xiangrong,Ma Licheng,Tang Ruzhong.Application of formation stress in tight sandstone gas reservoir fracturing development[J].Drilling Production Technology,2000,23(6):17-21.
|
[8] |
苏生瑞,朱合华,王士天,等.断裂物理力学性质对其附近地应力场的影响[J].西北大学学报:自然科学版,2002,32(6):655-658. Su Shengrui,Zhu Hehua,Wang Shitian,et al.The effect of fracture properties on stress field in the vicinity of a fracture[J].Journal of Northwest University:Natural Science Edition,2002,32(6):655-658.
|
[9] |
达引朋,赵文,卜向前,等.低渗透油田重复压裂裂缝形态规律研究[J].断块油气田,2012,19(6):781-784. Da Yinpeng,Zhao Wen,Bo Xiangqian,et al.Study on fracture pattern law for re-fracturing in low permeability reservoir[J].Fault-Block Oil Gas Field,2012,19(6):781-784.
|
[10] |
李颖川.采油工程[M].北京:石油工业出版社,2002:237-245. Li Yingchuan.Production engineering[M].Beijing:Petroleum Industry Press,2002:237-245.
|
[11] |
张高玖,赵德勇,丁建锁,等.井温资料在南阳油田压裂中的应用[J].重庆科技学院学报:自然科学版,2008,10(3):1-3. Zhang Gaojiu,Zhao Deyong,Ding Jiansuo,et al.Application of well logging temperature in Henan Oilfield[J].Journal of Chongqing University of Science and Technology:Natural Sciences Editon,2008,10(3):1-3.
|
[12] |
黎昌华,白璐.井温测井在油气田开发中的应用[J].钻采工艺,2001,24(5):35-37. Li Changhua,Bai Lu.Aapplication of well temperature logging in oilfield development[J].Drilling Production Technology,2001,24(5):35-37.
|
[13] |
刘伟伟,苏月琦,王茂文,等.特低渗油藏压裂井注采井距与注水见效关系[J].断块油气田,2012,19(6):736-739. Liu Weiwei,Su Yueqi,Wang Maowen,et al.Relationship of injector-producer spacing and waterflooding response for fracturing wells in ultra-low permeability reservoir[J].Fault-Block Oil Gas Field,2012,19(6):736-739.
|
[14] |
冯晴,吴财芳,雷波.沁水盆地煤岩力学特征及其压裂裂缝的控制[J].煤炭科学技术,2011,39(3):100-104. Feng Qing,Wu Caifang,Lei Bo.Coal/rock mechanics features of Qinshui Basin and fracturing crack control[J].Coal Science and Technology,2011,39(3):100-104.
|
[15] |
邓金根,蔚宝华,王金凤,等.定向射孔提高低渗透油藏水力压裂效率的模拟试验研究[J].石油钻探技术,2003,31(5):14-16. Deng Jingen,Yu Baohua,Wang Jinfeng,et al.Simulation trial research on increasing hydraulic fracturing efficiency of low permeability reservoir by oriented perforation[J].Petroleum Drilling Techniques,2003,31(5):14-16.
|
[16] |
程百利.腰英台油田压裂改造工艺技术研究[J].断块油气田,2011,18(1):123-125. Cheng Baili.Study on fracturing technology in Yaoyingtai Oilfield[J].Fault-Block Oil Gas Field,2011,18(1):123-125.
|
[17] |
汪国庆,周承富,王玉忠,等.福山凹陷小断块油藏储层压裂技术研究与应用[J].断块油气田,2011,18(6):813-816. Wang Guoqing,Zhou Chengfu,Wang Yuzhong,et al.Research and application on fracturing of small fault block reservoir in Fushan Depression[J].Fault-Block Oil Gas Field,2011,18(6):813-816.
|
[18] |
张广清,陈勉.定向射孔水力压裂复杂裂缝形态[J].石油勘探与开发,2009,39(1):103-107. Zhang Guangqing,Chen Mian.Complex fracture shapes in hydraulic fracturing with orientated perforations[J].Petroleum Exploration and Development,2009,39(1):103-107.
|
[19] |
王祖文,郭大立,邓金根,等.射孔方式对压裂压力及裂缝形态的影响[J].西南石油学院学报,2005,27(5):47-50. Wang Zuwen,Guo Dali,Deng Jingen.Effect of perforation mode on the fracturing pressure and cranny geometric shape[J].Journal of Southwest Petroleum Institute,2005,27(5):47-50.
|