普光高含硫气井生产管柱合理管径优选

吴晗, 吴晓东, 张庆生, 方越, 赵宇新

吴晗, 吴晓东, 张庆生, 方越, 赵宇新. 普光高含硫气井生产管柱合理管径优选[J]. 石油钻探技术, 2012, 40(1): 98-102. DOI: 10.3969/j.issn.1001-0890.2012.01.020
引用本文: 吴晗, 吴晓东, 张庆生, 方越, 赵宇新. 普光高含硫气井生产管柱合理管径优选[J]. 石油钻探技术, 2012, 40(1): 98-102. DOI: 10.3969/j.issn.1001-0890.2012.01.020
Wu Han, Wu Xiaodong, Zhang Qingsheng, Fang Yue, Zhao Yuxin. Reasonable Diameter Selection of Production String for Puguang Gas Well with High H2S[J]. Petroleum Drilling Techniques, 2012, 40(1): 98-102. DOI: 10.3969/j.issn.1001-0890.2012.01.020
Citation: Wu Han, Wu Xiaodong, Zhang Qingsheng, Fang Yue, Zhao Yuxin. Reasonable Diameter Selection of Production String for Puguang Gas Well with High H2S[J]. Petroleum Drilling Techniques, 2012, 40(1): 98-102. DOI: 10.3969/j.issn.1001-0890.2012.01.020

普光高含硫气井生产管柱合理管径优选

基金项目: 

国家科技重大专项子课题"高含硫气井生产系统节点分析"(编号:2008ZX05017-003-03-03HZ)部分研究内容。

详细信息
    作者简介:

    吴晗(1985-),男,湖北荆州人,2006毕业于长江大学石油工程专业,2009年获中国石油大学(北京)油气田开发专业硕士学位,在读博士研究生,主要从事采油、采气工程理论与技术方面的研究。

  • 中图分类号: TE254

Reasonable Diameter Selection of Production String for Puguang Gas Well with High H2S

  • 摘要: 普光气田高含硫气井在生产过程中会出现硫沉积、冲蚀、积液和形成水合物等问题,如果生产管柱管径合理可以延缓或避免出现这些问题。为此,针对普光气田高含硫气井的生产特点,以现有生产管柱优选方法为基础,通过分析高含硫气井临界携硫颗粒流量、临界携液流量、冲蚀流量和井口水合物生成条件,确定不同尺寸油管的合适产气量范围,再结合气井配产和井筒压力损失,优选出高含硫气井生产管柱的合理管径。利用该方法,对普光气田的高含硫气井P井进行了计算分析,结果表明,在当前生产管柱管径下,P井产气量大于冲蚀流量,井筒会发生冲蚀,为保护生产管柱,延长修井周期,将该井的产气量调整到当前生产管柱管径的合适产气量范围内,调整后该井生产稳定。采用该方法不但可以优选生产管柱管径,而且可以在现有生产管柱情况下,将产气量调整到当前生产管柱的合适产气量范围内。
    Abstract: In the production process of Puguang high-H2S gas well,many problems may occur,such as wellbore sulfur deposition,erosion,liquid loading and hydrate formation.However,reasonable diameter of production string can postpone or avoid these problems.For this purpose,according to the production characteristics of high-H2S gas well and based on the existing string selection method,proper gas production rate range of different tubing diameters was determined by analyzing the critical sulfur particle carrying flow rate,the critical liquid carrying flow rate,the erosion flow rate and wellhead hydrate formation condition.Then according to the production proration and wellbore pressure loss analysis,the reasonable diameter of production string was determined.Using this method,the production condition of high-H2S Puguang Gas Well P was calculated and the results showed that the gas production rate exceeded the erosion rate under current production string diameter,wellbore erosion would occur.In order to protect production string and postpone workover period,the gas production rate of Well P was adjusted to reach gas rate range suitable for current tubing diameter.After the gas production rate adjustment,Well P produced stably,which indicated that this method could not only determine the reasonable diameter of production string,but also adjust gas production rate to suitable production range under current tubing diameter.
  • [1] 付德奎,郭肖,杜志敏,等.高含硫裂缝性气藏储层伤害数学模型[J].石油学报,2010,31,(3):463-465. Fu Dekui,Guo Xiao,Du Zhimin,et al.Mathematical model for formation damage of fractured gas reservoir with high-content H2S[J].Acta Petrolei Sinica,2010,31(3):463-465.
    [2] 吴晓东,吴晗,韩国庆,等.考虑井筒硫析出的高含硫气井井筒温度、压力场计算新模型[J].天然气工业,2011,31(9):69-72. Wu Xiaodong,Wu Han,Han Guoqing,et al.A new model for calculating wellbore temperature and pressure distribution of a high-H2S gas well considering the influence of the sulfur release in wellbores[J].Natural Gas Industry,2011,31(9):69-72.
    [3] 刘华,李相方,曾大乾,等.普光气田采气井口水合物预测与防止技术[J].天然气工业,2007,27(5):88-90. Liu Hua,Li Xiangfang,Zeng Daqian,et al.Technologies of wellhead hydrate prediction and prevention for gas producers in Puguang Gas Field[J].Natural Gas Industry,2007,27(5):88-90.
    [4] 毛伟,梁政.气井井筒压力、温度耦合分析[J].天然气工业,1999,19(6):66-68. Mao Wei,Liang Zheng.Coupling analysis of the pressure and temperature in gas well borehole[J].Natural Gas Industry,1999,19(6):66-69.
    [5] 廖新维,冯积累.深层高压气藏井筒不稳态传热压力温度耦合计算方法[J].石油勘探与开发,2005,32(1):67-69. Liao Xinwei,Feng Jilei.Pressure-temperature coupling calculation of transient wellbore heat transfer in deep geopressured gas reservoir[J].Petroleum Exploration and Development,2005,32(1):67-69.
    [6] 郭肖,杜志敏,杨学锋,等.酸性气藏气体偏差系数计算模型[J].天然气工业,2008,28(4):89-92. Guo Xiao,Du Zhimin,Yang Xuefeng,et al.A calculating model for gas deviation coefficient of sour gas reservoir[J].Natural Gas Industry,2008,28(4):89-92.
    [7] 杨学锋,林永茂,黄时祯,等.酸性气藏气体粘度预测方法对比研究[J].特种油气藏,2005,12(5):42-45. Yang Xuefeng,Lin Yongmao,Huang Shizhen,et al.Correlation of gas viscosity prediction methods for acidic gas reservoirs[J].Special Oil Gas Reservoirs,2005,12(5):42-45.
    [8]

    Roberts B E.The effect of sulfur deposition on gas well inflow performance[J].SPE Reservoir Engineering,1997,12(2):118-123.

    [9] 孔珑.流体力学:Ⅱ[M].北京:高等教育出版社,2003:76-81. Kong Long.Fluid mechanics:Ⅱ[M].Beijing:Higher Education Press,2003:76-81.
    [10] 刘双全,吴晓东,吴革生,等.气井井筒携液临界流速和流量的动态分布研究[J].天然气工业,2007,27(2):104-106. Liu Shuangquan,Wu Xiaodong,Wu Gesheng,et al.A study on dynamic distribution of the liquid-carrying critical velocities and flow rates along the wellbore of gas wells[J].Natural Gas Industry,2007,27(2):104-105.
    [11] 喻西崇,赵金洲,郭建春.天然气水合物生成条件预测模型的比较[J].油气储运,2002,21(1):20-24. Yu Xichong,Zhao Jinzhou,Guo Jianchun.The prediction model comparison of gas hydrate formation condition[J].Oil Gas Storage and Transportation,2002,21(1):20-24.
计量
  • 文章访问数:  2937
  • HTML全文浏览量:  46
  • PDF下载量:  3373
  • 被引次数: 0
出版历程
  • 收稿日期:  2010-12-08
  • 修回日期:  2011-12-25
  • 刊出日期:  1899-12-31

目录

    /

    返回文章
    返回