顺南区块裂缝性储层置换式气侵影响因素研究

黄国平; 何世明; 汤明; 刘洋; 雷鸣

doi:10.11911/syztjs.2018125

顺南区块裂缝性储层置换式气侵影响因素研究

黄国平^1,2,
何世明^1, ,,
汤明¹,
刘洋²,
雷鸣³

1.
油气藏地质及开发工程国家重点实验室(西南石油大学), 四川成都 610500;
2.
中国石化西北油田分公司企业管理处, 新疆乌鲁木齐 830011;
3.
中国石油集团渤海钻探工程有限公司第五钻井工程分公司, 河北河间 062465

基金项目:

国家自然科学"基于流-固-化耦合理论的欠平衡钻水平井井壁失稳机理研究"（编号：51474186）、"基于多场耦合理论的页岩气水平井井壁失稳机理研究"（编号：51574202）、"高温高压高含酸性气体的海相裂缝性地层溢流机理研究"（编号：51774247）和四川省科技项目"高温高压裂缝性地层重力置换溢流机理与工业化应用研究"（编号：2018JY0460）联合资助。

详细信息

作者简介:
黄国平(1981-),男,重庆人,2003年毕业于新疆石油学院化学工程专业,高级经济师,主要从事石油工程技术方面的研究工作。

通讯作者:
何世明,hesming@sina.com

中图分类号: TE28⁺3
计量
- 文章访问数: 7774
- HTML全文浏览量: 111
- PDF下载量: 6531
出版历程
- 收稿日期: 2018-05-07
- 刊出日期: 1899-12-31

A Study on the Effect of Displacement Gas Cut on Fractured Reservoirs in Shunnan Block

1.
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation(Southwest Petroleum University), Chengdu, Sichuan, 610500, China;
2.
Department of Enterprise Management, Sinopec Northwest Oilfield Company, Urumqi, Xinjiang, 830011, China;
3.
The No.5 Drilling Engineering Branch, CNPC Bohai Drilling Engineering Company Limited, Hejian, Hebei, 062465, China

摘要

摘要: 塔河油田顺南区块塔中北坡奥陶系鹰山组上段属于碳酸盐岩裂缝孔洞型储层，钻进该层段时气侵现象严重，现场常采用提高钻井液密度和循环排气的方式处理气侵。为解决裂缝性储层在高密度钻井液条件下易发生漏失、循环排气方式处理时间较长等问题，对裂缝性储层置换式气侵发生时间的影响因素进行了研究。通过建立漏失速率模型与置换式气侵模型，分析了裂缝宽度、高度、长度，地层压力、压差及钻井液的黏度、密度对气侵发生时间的影响。研究发现，裂缝宽度越小、高度和长度越大，钻井液黏度越大、密度越小，以及地层压力越低、压差越大时，气侵发生时间越长。研究结果表明，现场施工中合理控制钻井液密度和压差，可以控制和减小置换式气侵速度。
- 裂缝性储层 /
- 气侵 /
- 气液置换 /
- 气侵模型 /
- 钻井液 /
- 顺南区块
Abstract: The upper section of Ordovician Yingshan Formation on Tazhong Northern Slope of Shunnan Block in the Tahe Oilfield belongs to a type of porous fractured carbonate reservoir.in this type reservoir,gas cut is the most serious during drilling,and this gas cut is often treated by increasing the density of drilling fluid and circulating the drilling fluid to exhaust the gas in the field.In order to solve the problems of high density drilling fluid,including its tendency to leak,and long treatment time required for exhaust circulation,researchers studied the factors that most influenced the gas cut time of gas-liquid displacement in the fractured reservoir.The viscosity and density of the drilling fluid on time required for gas cut were analyzed by building the leaking rate model and a gas cut model. Thus it was possible to evaluate effects of width,height and length of fracture,formation pressure and pressure difference..It was found that gas cut is slower under conditions of smaller width,greater height and length of fracture,greater viscosity and smaller density of drilling fluid,as well as lower pressure and greater pressure difference of formation.Therefore,proper drilling fluid density and pressure difference control measure are necessary for field operation to effectively inhibit and reduce the displacement gas cut rate.
- fractured reservoir /
- gas cut /
- gas-liquid displacement /
- gas cut model /
- drilling fluid /
- Shunnan Block

HTML全文

参考文献(7)

[1]	俞新永,周建东,滕学清.塔里木轮南奥陶系碳酸盐岩高压油气藏水平井及大斜度井欠平衡钻井技术[J].天然气工业,1999,19(2):63-68. YU Xinyong,ZHOU Jiandong,TENG Xueqing.Under balance pressure drilling techniques of the horizontal well and high angle deviated hole in Ordovician carbonate rock high-pressure reservoirs in Lunnan Region of the Tarim Basin[J].Natural Gas Industry,1999,19(2):63-68.
[2]	易浩,杜欢,贾晓斌,等.塔河油田及周缘超深井井身结构优化设计[J].石油钻探技术,2015,43(1):75-81. YI Hao,DU Huan,JIA Xiaobin,et al.The optimal design of a casing program for ultra-deep wells in the Tahe Oilfield and its periphery[J].Petroleum Drilling Techniques,2015,43(1):75-81.
[3]	王沫,杜欢,伊尔齐木,等.顺南井区优快钻井技术[J].石油钻探技术,2015,43(3):50-54. WANG Mo,DU Huan,Eerqm,et al.Optimal and fast drilling technology for Shunnan Block[J].Petroleum Drilling Techniques,2015,43(3):50-54.
[4]	朱义东,张伟,刘伟新,等.地层破裂压力计算模型及分析[J].石油地质与工程,2013,27(2):92-94. ZHU Yidong,ZHANG Wei,LIU Weixin,et al.Calculation model and analysis of formation fracture pressure[J].Petroleum Geology and Engineering,2013,27(2):92-94.
[5]	王贵,曹成,蒲晓林,等.塔河油田桑塔木组钻井液优化与室内评价[J].钻采工艺,2015,38(5):73-76. WANG Gui,CAO Cheng,PU Xiaolin,et al.Optimization and laboratory study for drilling fluids of Sangtamu Group in Tahe Oilfield[J].Drilling Production Technology,2015,38(5):73-76.
[6]	张兴全,周英操,刘伟,等.欠平衡气侵与重力置换气侵特征及判定方法[J].中国石油大学学报(自然科学版),2015,39(1):95-102. ZHANG Xingquan,ZHOU Yingcao,LIU Wei,et al.A method for characterization and identification of gas kicks caused by underbalanced pressure and gracity displacement[J].Journal of China University of Petroleum(Edition of Natural Science),2015,39(1):95-102.
[7]	卓鲁斌,葛云华,张富成,等.碳酸盐岩油气藏气侵早期识别技术[J].石油学报,2012,33(增刊2):174-180. ZHUO Lubin,GE Yunhua,ZHANG Fucheng,et al.An early identification technique for gas cut in carbonate reservoirs[J].Acta Petrolei Sinica,2012,33(supplement 2):174-180.

施引文献(17)

期刊类型引用(11)

1.	翁定为，孙强，梁宏波，雷群，管保山，慕立俊，刘汉斌，张绍林，柴麟，黄瑞. 低渗透老油田柔性侧钻水平井挖潜技术. 石油勘探与开发. 2025(01): 194-203 . 百度学术
2.	卢聪，李秋月，郭建春. 分布式光纤传感技术在水力压裂中的研究进展. 油气藏评价与开发. 2024(04): 618-628 . 百度学术
3.	叶志权，肖雷，王丽峰，薛浩楠，王晗. 小井眼连续油管多簇射孔填砂分段压裂技术——以百口泉油田百1断块X井为例. 油气井测试. 2023(01): 33-37 . 百度学术
4.	李娜. 水平井分段多簇压裂技术影响因素. 化学工程与装备. 2023(07): 97-98 . 百度学术
5.	柳军，杜智刚，牟少敏，王睦围，张敏，殷腾，俞海，曹大勇. 连续油管分簇射孔管柱通过能力分析模型及影响因素研究. 特种油气藏. 2022(05): 139-148 . 百度学术
6.	张文康. 长庆油田陇东地区页岩油水平井细分切割压裂技术. 石化技术. 2022(12): 139-141 . 百度学术
7.	邹立萍，邹昌柏. 关于水平井压裂工艺技术现状及展望. 当代化工研究. 2021(10): 7-8 . 百度学术
8.	苗娟，黄兵，谢力，汤明. 高钢级套管段铣工具优化及性能评价. 特种油气藏. 2021(02): 163-170 . 百度学术
9.	李杉杉，孙虎，张冕，池晓明，刘欢. 长庆油田陇东地区页岩油水平井细分切割压裂技术. 石油钻探技术. 2021(04): 92-98 . 本站查看
10.	谢慧华，马青印，辛红伟，田相元，孔春岩，贺亚杰. 文留油田盐间油藏深部双层套管开窗侧钻技术. 断块油气田. 2021(05): 706-710 . 百度学术
11.	李海涛，罗红文，向雨行，安树杰，李颖，蒋贝贝，谢斌，辛野. DTS/DAS技术在水平井压裂监测中的应用现状与展望. 新疆石油天然气. 2021(04): 62-73 . 百度学术