Strengthening Plugging Operations by Combining Cross-Linked Film and Chemical Consolidation in Well Ming-1
-
摘要: 明1井二开1 894.00~2 514.00 m井段钻进过程中漏失频发，且地层承压能力低，为保证二开后续井段钻井安全，需要对该井上部井段进行承压堵漏作业，以提高其承压能力。在分析漏失情况和钻遇地层岩性的基础上，确定了易漏失层位。根据易漏失层位的岩性并借鉴前期堵漏经验，确定采用交联成膜与化学固结承压堵漏技术进行承压堵漏作业，即首先利用交联成膜堵漏浆初步提高地层的承压能力，再利用化学固结堵漏浆进一步提高地层的承压能力，以满足高压油气层安全钻进要求。明1井上部井段进行交联成膜与化学固结承压堵漏后，2 021.58 m以浅井段地层的承压能力提高到1.70 kg/L以上，2 021.58 m以深井段地层的承压能力高于1.60 kg/L，达到了承压要求，二开井段后续钻井过程中，承压堵漏井段未再发生漏失。实践表明，交联成膜与化学固结承压堵漏技术可大幅度提高易漏失地层的承压能力，为同类地层承压堵漏提供技术借鉴。Abstract: Since lost circulation occurred frequently in the 1 894.00-2 514.00 m interval in the second drilling section of the Well Ming-1,and the formation has a low pressure-bearing capacity,strengthening of plugging operations must be done for the upper interval to enhance its pressure-bearing capacity and to ensure safety while drilling of the remaining part of the second drilling section.Based on the the fact that the lithology contains weak layers and the prior experience of leak plugging,strengthening the plugging of cross-linked gel and chemical consolidation was adopted,in which a cross-linked gel plugging slurry was injected first to enhance the preliminary pressure-bearing capacity of the formation,then chemical consolidation slurry was applied to further enhance the pressure-bearing capacity of the formation to satisfy relevant requirements for safe drilling.After the plugging operation,the pressure-bearing capacity of the upper section shallower than 2 021.58 m of Well Ming-1 was increased to over 1.70 kg/L,whereas the deeper section was increased to over 1.60 kg/L,which satisfied the pertinent requirements,and no lost circulation took place in the plugged interval occurred and in the drilling of the rest interval.The results showed the cross-linked gel and chemical consolidation strengthened plugging operation could effectively enhance the pressure-bearing capacity of weak formations,which offered an effective means for strengthening the plugging operation in similar formations.
-
Keywords:
- cross-linked gel /
- chemical consolidation /
- leakage zone /
- plugging /
- resispance pressure /
- Well Ming-1
-
-
[1] 蒋希文.钻井事故与复杂问题[M].北京:石油工业出版社,2001:310. JIANG Xiwen.Drilling accident and complex incidents[M].Beijing:Petroleum Industry Press,2001:310. [2] 詹俊阳,刘四海,刘金华,等.高强度耐高温化学固结堵漏剂HDL-1的研制及应用[J].石油钻探技术,2014,42(2):69-74. ZHAN Junyang,LIU Sihai,LIU Jinhua,et al.Development and application of chemical consolidation plugging agent HDL-1[J].Petroleum Drilling Techniques,2014,42(2):69-74. [3] 刘四海,崔庆东,李卫国.川东北地区井漏特点及承压堵漏技术难点与对策[J].石油钻探技术,2008,36(3):20-23. LIU Sihai,CUI Qingdong,LI Weiguo.Circulation loss characteristics and challenges and measures to plug under pressure in Northeast Sichuan Area[J].Petroleum Drilling Techniques,2008,36(3):20-23. [4] 陈亮,王立峰,蔡利山,等.塔河油田盐上承压堵漏工艺技术[J].石油钻探技术,2006,34(4):63-66. CHEN Liang,WANG Lifeng,CAI Lishan,et al.High pressure circulation lost techniques for salt beds in the Tahe Oilfield[J].Petroleum Drilling Techniques,2006,34(4):63-66. [5] 蔡利山,张进双,苏长明.关于合理使用承压堵漏技术指标的建议[J].石油钻探技术,2008,36(2):84-86. CAI Lishan,ZHANG Jinshuang,SU Changming.Suggestions about reasonable use of sealing under pressure technology[J].Petroleum Drilling Techniques,2008,36(2):84-86. [6] 王善举,魏殿举,李旭东,等.长裸眼井段承压堵漏工艺技术[J].钻井液与完井液,2008,25(2):67-69. WANG Shanju,WEI Dianju,LI Xudong,et al.Control mud losses in pressured long open holes[J].Drilling Fluid Completion Fluid,2008,25(2):67-69. [7] 刘金华,刘四海,陈小锋,等.承压堵漏技术研究及其应用[J].断块油气田,2011,18(1):116-118,125. LIU Jinhua,LIU Sihai,CHEN Xiaofeng,et al.Study and application of pressure bearing and lost circulation technique[J].Fault-Block Oil Gas Field,2011,18(1):116-118,125. [8] 高绍智.元坝1井承压堵漏技术[J].石油钻探技术,2008,36(4):45-48. GAO Shaozhi.Leakage control under pressure in Well Yuanba-1[J].Petroleum Drilling Techniques,2008,36(4):45-48. [9] 柴金鹏,邱正松,刘海鹏,等.国外Y区S25井堵漏技术[J].钻井液与完井液,2015,32(3):47-50. CHAI Jinpeng, QIU Zhengsong,LIU Haipeng,et al.Control lost circulation in Well S25 of Block Y[J].Drilling Fluid Completion Fluid,2015,32(3): 47-50. [10] 李战伟,王维,赵永光,等.南堡1号构造储层雷特承压堵漏技术[J].钻井液与完井液,2014,31(5):56-59. LI Zhanwei,WANG Wei,ZHAO Yongguang,et al.Mud loss control under pressure in No.1 Structure of Nanpu: study and application[J].Drilling Fluid Completion Fluid,2014,31(5):56-59. [11] 孙明光.塔河油田盐上裸眼承压堵漏技术[J].石油钻采工艺,2007,29(2):91-94. SUN Mingguang. Pressure sealing technology of open holes for salt beds in the Tahe Oilfield[J].Oil Drilling Production Technology,2007,29(2):91-94. [12] 董建辉,肖新宇,杨成新,等.库车山前盐上长裸眼段承压堵漏工艺技术[J].石油机械,2012,40(1):33-36. DONG Jianhui,XIAO Xinyu,YANG Chengxin,et al.High pressure circulation lost techniques for salt beds in suprasalt structures of Kuche[J].China Petroleum Machinery,2012,40(1):33-36. [13] 蔡利山,苏长明,刘金华.易漏失地层承压能力分析[J].石油学报,2010,31(2):311-317. CAI Lishan,SU Changming,LIU Jinhua.Analysis on pressure-bearing capacity of leakage formation[J].Acta Petrolei Sinica,2010,31(2):311-317. [14] 徐同台,刘玉杰.钻井工程防漏堵漏技术[M].北京:石油工业出版社,1997:91-92. XU Tongtai,LIU Yujie.Lost circulation prevention and control technology in drilling engineering[M].Beijing:Petroleum Industry Press,1997:91-92. [15] 王贵,蒲晓林.提高地层承压能力的钻井液堵漏作用机理[J].石油学报,2010,31(6):1009-1012. WANG Gui,PU Xiaolin.Plugging mechanism of drilling fluid by enhancing wellbore pressure[J].Acta Petrolei Sinica,2010,31(6):1009-1012. [16] SONG J,ROJAS J C.Preventing mud losses by wellbore strengthening[R].SPE 101593,2006.
[17] 卢小川,范白涛,赵忠举,等.国外井壁强化技术的新进展[J].钻井液与完井液,2012,29(6):74-78. LU Xiaochuan,FAN Baitao,ZHAO Zhongju,et al.New research progress on wellbore strengthening technology[J].Drilling Fluid Completion Fluid,2012,29(6):74-78. [18] 贾利春,陈勉,谭清明,等.承压封堵裂缝止裂条件影响因素分析[J].石油钻探技术,2016,44(1):49-56. JIA Lichun,CHEN Mian,TAN Qingming,et al.Key factors for inhibiting fracture propagation during leakage control under pressure[J].Petroleum Drilling Techniques,2016,44(1):49-56. -
期刊类型引用(11)
1. 张喜民. 基于遗传算法的丛式井平台部署优化研究. 石油钻探技术. 2024(04): 44-50 . 
本站查看
2. 史配铭，贺会锋，朱明明，孟凡金，屈艳平，王玉鹏. 苏里格南部气田Φ152.4 mm小井眼大斜度井快速钻井关键技术. 石油工业技术监督. 2024(09): 51-56 . 百度学术
3. 黄晶，赵昆，夏绪波，毛庆春. 压裂工程“井工厂”压裂模式提速提效分析. 江汉石油职工大学学报. 2023(04): 15-17 . 百度学术
4. 张金成. 第一性原理思维法在页岩气革命中的实践与启示. 钻探工程. 2022(02): 1-8 . 百度学术
5. 王斌. 涪陵页岩气田老区钻井存在的问题探讨. 江汉石油职工大学学报. 2021(03): 34-36 . 百度学术
6. 闫伟，丁小平，李文博. “井工厂”钻井成本模型构建与平台部署方案优化——以渤海湾盆地济阳坳陷致密油开发为例. 石油钻采工艺. 2021(03): 265-271 . 百度学术
7. 陈亚联. 新型压裂技术应用分析. 化工技术与开发. 2020(01): 38-41 . 百度学术
8. 黄伟和，刘海. 页岩气一体化开发钻井投资优化分析方法研究. 中国石油勘探. 2020(02): 51-61 . 百度学术
9. 张辉. 大牛地气田丛式小井眼集约化钻井技术. 天然气技术与经济. 2020(02): 28-33 . 百度学术
10. 梅绪东，金吉中，王朝强，何勇，王丹，张春. 涪陵页岩气田绿色开发的实践与探索. 西南石油大学学报(社会科学版). 2017(06): 9-14 . 百度学术
11. 曹明. 页岩气压裂试气工程技术进展. 中国矿业. 2017(S2): 359-362 . 百度学术
其他类型引用(5)
计量
- 文章访问数: 9632
- HTML全文浏览量: 84
- PDF下载量: 10824
- 被引次数: 16
下载:
