冲击作用下岩石裂纹长度预测模型及数值模拟研究

邓勇; 陈勉; 金衍; 卢运虎; 邹代武

doi:10.11911/syztjs.201604008

冲击作用下岩石裂纹长度预测模型及数值模拟研究

邓勇^1,2,
陈勉^1,2, ,,
金衍^1,2,
卢运虎^1,2,
邹代武^1,2

1.
中国石油大学(北京)石油工程学院, 北京 102249;
2.
油气资源与探测国家重点实验室(中国石油大学(北京)), 北京 102249

基金项目:

国家杰出青年科学“石油工程岩石力学”（编号：51325402）资助。

详细信息

作者简介:
邓勇(1988-),男,湖北咸宁人,2012年毕业于长江大学石油工程专业,油气井工程专业在读博士研究生,主要从事石油工程岩石力学方面的研究。E-maildengyong2012@yeah.net。

通讯作者:
陈勉,chenmiancup@163.com。系本刊审稿专家。

中图分类号: TE21
计量
- 文章访问数: 3847
- HTML全文浏览量: 112
- PDF下载量: 5136
出版历程
- 收稿日期: 2015-10-10
- 修回日期: 2016-04-14
- 刊出日期: 1899-12-31

Prediction Model and Numerical Simulation for Rock Fissure Length under Impact Load

DENG Yong^1,2,
CHEN Mian^1,2, ,,
JIN Yan^1,2,
LU Yunhu^1,2,
ZOU Daiwu^1,2

1.
College of Petroleum Engineering, China University of Petroleum(Beijing), Beijing, 102249, China;
2.
State Key Laboratory of Petroleum Resources and Prospecting(China University of Petroleum(Beijing)), Beijing, 102249, China

摘要

摘要: 为研究动载侵入岩石过程中的裂纹演化规律和预测裂纹长度，根据牛顿第二定律及波动理论，建立了岩石在冲击过程中的最大冲击力与冲击速度间的数学模型，结合岩石在静载作用下的载荷与裂纹长度间的关系，建立了岩石在冲击载荷作用下形成裂纹的长度预测模型，并利用离散元数值模拟方法研究了岩石动态破碎过程中裂纹的形成与扩展特征以及冲击速度对裂纹长度的影响规律。分析研究发现，岩石在冲击力作用下形成的裂纹以张性裂纹为主，且径向裂纹向着岩石自由表面扩展，侧向裂纹从损伤区萌生并向岩石内部逐渐扩展；径向裂纹长度和侧向裂纹长度均与冲击速度呈幂函数关系，数值模拟结果与理论模型结果基本吻合；冲击速度由15 m/s增大至35 m/s，岩石的破碎范围和破碎深度逐渐增大，形成的径向裂纹长度从3.47 mm增大到9.03 mm，侧向裂纹长度从7.29 mm增大到14.58 mm。研究结果为研究岩石的动载侵入断裂和动态破碎机理提供了理论依据。
- 冲击破岩 /
- 裂纹长度 /
- 离散元 /
- 岩石破碎 /
- 数学模型
Abstract: In order to study the rock fracture and fissure propagation and evolution rule and to predict fissure (crack) length in the process of dynamic load intruding the rock, a mathematical model for describing relationship between the maximum impact force and the impact velocity during rock breaking was developed according to the Newton’s second law and the wave theory. Based on the relationship between static load and crack length of rock, the theoretical model of fissure length under impact load was established. In addition, researchers used a discrete element numerical simulation method to investigate the characteristics of fissure formation and propagation and the influence of impact velocity on crack length. The results indicate that tensile fissures are mainly formed under the impact force,and the radial cracks extend to rock free face, lateral fissures initiate from the damaged area and then extend to the inside of rock. Radial and lateral fissure lengths have a power function relationship with the impact velocity, and the numerical simulation results are consistent with the results of theoretical model. As the impact velocity increases from 15 m/s to 35 m/s, the rock breaking range and depth increase gradually, the radial crack length increased from 3.47 mm to 9.03 mm and lateral crack length increased from 7.29 mm to 14.58 mm. The research results can provide a theoretical reference for investigating rock fractures and fissure propagation under dynamic load intrusion and dynamic crushing mechanism.
- rock shatter under impact /
- fissure length /
- discrete element /
- rock breaking /
- mathematical model

HTML全文

参考文献(20)

[1]	许京国,尤军,陶瑞东,等.自激振荡式冲击钻井工具在大港油田的应用[J].石油钻探技术,2013,41(4):116-119.XU Jingguo,YOU Jun,TAO Ruidong,et al.Application of self-oscillating impact drilling tool in Dagang Oilfield[J].Petroleum Drilling Techniques,2013,41(4):116-119.
[2]	徐小荷,余静.岩石破碎学[M].北京:煤炭工业出版社,1984:129-181.XU Xiaohe,YU Jing.Rock breaking theory[M].Beijing:China Coal Industry House,1984:129-181.
[3]	李思琪,闫铁,王希军,等.基于最小作用量原理的岩石微振动方程及分析[J].石油钻探技术,2014,42(3):66-70.LI Siqi,YAN Tie,WANG Xijun,et al.The micro-vibration equation of rock and its analysis basing on the principle of least action[J].Petroleum Drilling Techniques,2014,42(3):66-70.
[4]	张宗贤,寇绍全.关于岩石的动静态侵入断裂[J].北京科技大学学报,1990,12(5):401-407.ZHANG Zongxian,KOU Shaoquan.On rock fracture under static and dynamic indentations[J].Journal of University of Science and Technology Beijing,1990,12(5):401-407.
[5]	张宗贤,寇绍全.固体力学中侵入问题的若干新进展[J].力学进展,1992,22(2):183-193.ZHANG Zongxian,KOU Shaoquan.Some new progress in indentation problem of solid mechanics[J].Advances in Mechanics,1992,22(2):183-193.
[6]	ZHANG Hao,SONG Haipeng,KANG Yilan,et al.Experimental analysis on deformation evolution and crack propagation of rock under cyclic indentation[J].Rock Mechanics and Rock Engineering,2013,46(5):1053-1059.
[7]	ZHANG Hao,HUANG Ganyun,SONG Haipeng,et al.Experimental investigation of deformation and failure mechanisms in rock under indentation by digital image correlation[J].Engineering Fracture Mechanics,2012,96:667-675.
[8]	ALEHOSSEIN H,DETOURNAY E,HUANG H.An analytical model for the indentation of rocks by blunt tools[J].Rock Mechanics and Rock Engineering,2000,33(4):267-284.
[9]	CHEN L H,LABUZ J F.Indentation of rock by wedge-shaped tools[J].International Journal of Rock Mechanics and Mining Sciences,2006,43(7):1023-1033.
[10]	李夕兵.岩石动力学基础与应用[M].北京:科学出版社,2014:176-217.LI Xibing.Rock dynamics fundamentals and applications[M].Beijing:Science Press,2014:176-217.
[11]	李玮,闫铁,张志超,等.高频振动钻具冲击下岩石响应机理及破岩试验分析[J].石油钻探技术,2013,41(6):25-28.LI Wei,YAN Tie,ZHANG Zhichao,et al.Rock response mechanism and rock breaking test analysis for impact of high frequency vibration drilling tool[J].Petroleum Drilling Techniques,2013,41(6):25-28.
[12]	王明波,王瑞和,陈炜卿.单个磨料颗粒冲击岩石过程的数值模拟研究[J].石油钻探技术,2009,37(5):34-38.WANG Mingbo,WANG Ruihe,CHEN Weiqing.Numerical simulation study of rock breaking mechanism and process under abrasive water jet[J].Petroleum Drilling Techniques,2009,37(5):34-38.
[13]	刘希圣.钻井工艺原理:上册[M].北京:石油工业出版社,1988:50-77.LIU Xisheng.Principles of drilling technology:volume Ⅰ[M].Beijing:Petroleum Industry Press,1988:50-77.
[14]	MARSHALL D B,LAWN B R,EVANS A G.Elastic/plastic indentation damage in ceramics:the lateral crack system[J].Journal of the American Ceramic Society,1982,65(11):561-566.
[15]	MARSHALL D B.Geometrical effects in elastic/plastic indentation[J].Journal of the American Ceramic Society,1984,67(1):57-60.
[16]	HUANG Haiying,DETOURNAY E.Discrete element modeling of tool-rock interaction Ⅱ:rock indentation[J].International Journal for Numerical and Analytical Methods in Geomechanics,2013,37(13):1930-1947.
[17]	AKBARI B,BUTT S D,MUNASWAMY K,et al.Dynamic single PDC cutter rock drilling modeling and simulations focusing on rate of penetration using distinct element method[R].ARMA-11-379,2011.
[18]	谭青,张魁,周子龙,等.球齿滚刀作用下岩石裂纹的数值模拟与试验观测[J].岩石力学与工程学报,2010,29(1):163-169.TAN Qing,ZHANG Kui,ZHOU Zilong,et al.Numerical simulation and experimental observation of rock cracks under action of spherical tooth hob cutting[J].Chinese Journal of Rock Mechanics and Engineering,2010,29(1):163-169.
[19]	谭青,徐孜军,夏毅敏,等.盾构切刀作用下岩石动态响应机制的数值模拟研究[J].岩土工程学报,2013,35(2):235-242.TAN Qing,XU Zijun,XIA Yimin,et al.Numerical simulation of dynamic response mechanism of rock by shield machine cutters[J].Chinese Journal of Geotechnical Engineering,2013,35(2):235-242.
[20]	朱焕春.PFC及其在矿山崩落开采研究中的应用[J].岩石力学与工程学报,2006,25(9):1927-1931.ZHU Huanchun.PFC and application case of caving study[J].Chinese Journal of Rock Mechanics and Engineering,2006,25(9):1927-1931.

施引文献(15)

期刊类型引用(5)

1.	陈瑶，何宗斌，覃莹瑶，童新，陆迪. 基于核磁共振测井的储层渗透率计算方法综述. 能源与环保. 2022(01): 125-131 . 百度学术
2.	杨旺旺，张冲，杨梦琼，张亚男，汪明锐，孙康. 基于长短期记忆循环神经网络的伊拉克H油田碳酸盐岩储层渗透率测井评价. 大庆石油地质与开发. 2022(01): 126-133 . 百度学术
3.	张冲，汤潇，倪国辉，闵云艺，张亚男. 基于Thomeer函数的中东区块碳酸盐岩储层渗透率评价. 长江大学学报(自然科学版). 2021(01): 43-51 . 百度学术
4.	朱林奇，张冲，周雪晴，魏旸，黄雨阳，高齐明. 融合深度置信网络与与核极限学习机算法的核磁共振测井储层渗透率预测方法. 计算机应用. 2017(10): 3034-3038 . 百度学术
5.	朱林奇，张冲，何小菊，吴中彬，周新波，袛淑华，李阳. 基于改进BPNN与T_2全谱的致密砂岩储层渗透率预测. 石油物探. 2017(05): 727-734 . 百度学术