茂加6582井双分支超短半径水平井钻完井技术

杨决算, 郑瑞强

杨决算, 郑瑞强. 茂加6582井双分支超短半径水平井钻完井技术[J]. 石油钻探技术, 2016, 44(1): 63-66. DOI: 10.11911/syztjs.201601012
引用本文: 杨决算, 郑瑞强. 茂加6582井双分支超短半径水平井钻完井技术[J]. 石油钻探技术, 2016, 44(1): 63-66. DOI: 10.11911/syztjs.201601012
YANG Juesuan, ZHENG Ruiqiang. Drilling and Completion Technology for a Two-Branch Multi-Lateral Ultra-Short Radius Horizontal Well:Maojia 6582, Daqing Oilfield[J]. Petroleum Drilling Techniques, 2016, 44(1): 63-66. DOI: 10.11911/syztjs.201601012
Citation: YANG Juesuan, ZHENG Ruiqiang. Drilling and Completion Technology for a Two-Branch Multi-Lateral Ultra-Short Radius Horizontal Well:Maojia 6582, Daqing Oilfield[J]. Petroleum Drilling Techniques, 2016, 44(1): 63-66. DOI: 10.11911/syztjs.201601012

茂加6582井双分支超短半径水平井钻完井技术

基金项目: 

中国石油天然气集团公司重大科技专项"大庆油田原油4000万吨持续稳产关键技术研究"之课题"喇萨杏油田厚油层顶部挖潜工艺技术研究"(编号:2011E-1206)资助。

详细信息
    作者简介:

    杨决算(1964-),男,湖南汨罗人,1985年毕业于江汉石油学院钻井工程专业,教授级高级工程师,主要从事钻井工程技术研究。E-mailyangjuesuan@cnpc.com.cn。

  • 中图分类号: TE243+.9

Drilling and Completion Technology for a Two-Branch Multi-Lateral Ultra-Short Radius Horizontal Well:Maojia 6582, Daqing Oilfield

  • 摘要: 为了进一步完善超短半径水平井钻完井技术,提高单井产油量,大庆油田设计施工了茂加65-82双分支超短半径水平井。针对2个分支井眼曲率半径不一致导致井眼轨迹控制难度大、分支井眼与窗口密封难度大等技术难点,根据茂加65-82井原井眼情况,对双分支水平井眼的井身结构、井眼轨道进行了优化设计,并在钻头体与导向管之间设计了倾角,以满足造斜要求,顺利完成了曲率半径分别为5.9和3.2 m的上下分支水平井眼,井眼轨迹达到了设计要求。茂加65-82侧钻双分支水平井初期日产油量2.5 t,与原井产油量相比提高了8.3倍,目前日产油量1.0 t,已累计增油380 t。茂加65-82双分支超短半径水平井的顺利钻成为大庆油田剩余油挖潜提供了一种新的技术手段。
    Abstract: To further improve ultra-short radius horizontal well technology, the Daqing Oilfield team designed a two-lateral ultra-short radius horizontal well for Maojia 65-82. They designed it with two branches to improve the yield of a single well. In order to overcome the difficulties of well trajectory control and difficulties of sealing branch holes and windows due to different curvature radius in the two branched holes, the inclination angles between the drill bit and the guide pipe were designed to meet the requirement of buildup. They combined the optimum design for the casing program which was completed incorporating well profiles and well trajectory optimum design based on the original borehole conditions of the well. As a result, the upper and lower branches with radius of curvatures of 5.9 m and 3.2 m were completed successfully in the Well Maojia 65-82. The initial daily oil production in the Maojia 65-82 was 2.5 t, which is 8.3 times higher than that of the original borehole. At present, daily oil production is 1.0 t and cumulative oil production is 380 t. The completion of the multilateral ultra-short radius horizontal well Maojia 65-82 with two branches may provide a new method for exploitation of residual oil in the Daqing Oilfield.
  • [1] 宫华,郑瑞强,范存,等.大庆油田超短半径水平井钻井技术[J].石油钻探技术,2011,39(5):19-22. GONG Hua,ZHENG Ruiqiang,FAN Cun,et al.Ultra-short radius horizontal well drilling technology in Daqing Oilfield[J].Petroleum Drilling Techniques,2011,39(5):19-22.
    [2] 汪孟洋,龙飞,何沛,等.超短半径水平井轨迹控制技术[J].断块油气田,1998,5(2):62-66. WANG Mengyang,LONG Fei,HE Pei,et al.The track control of horizontal section in URHW[J].Fault-Block Oil Gas Field,1998,5(2):62-66.
    [3] 张永清,张阳,邓红琳,等.红河油田长8油藏水平井钻完井技术[J].断块油气田,2015,22(3):384-387. ZHANG Yongqing,ZHANG Yang,DENG Honglin,et al.Technology of well drilling and completion for horizontal well in Chang 8 oil reservoirof Honghe Oilfield[J].Fault-Block Oil Gas Field,2015,22(3):384-387.
    [4] 周爱照,王瑞和,李成嵩,等.河3-支平1井TAML5级分支井钻完井技术[J].石油钻探技术,2012,40(2):117-123. ZHOU Aizhao,WANG Ruihe,LI Chengsong,et al.Drilling and completion technology of the TAML5 lateral well-Well He 3 Radial 1[J].Petroleum Drilling Techniques,2012,40(2):117-123.
    [5] 倪益民,袁永嵩,赵金海,等.胜利油田两口超短半径侧钻水平井的设计与施工[J].石油钻探技术,2007,35(6):57-59. NI Yimin,YUAN Yongsong,ZHAO Jinhai,et al.Design and implementation of two-short radius side-tracking horizontal wells in Shengli Oilfield[J].Petroleum Drilling Techniques,2007,35(6):57-59.
    [6] 朱健军.侧钻超短半径水平井J37-26-P14井钻井设计与施工[J].石油钻探技术,2011,39(5):106-109. ZHU Jianjun.Drilling design and implementation of sidetracking ultra-short radius horizontal Well J37-26-P14[J].Petroleum Drilling Techniques,2011,39(5):106-109.
    [7] 李欢欢.超短半径水平井的优化设计[J].探矿工程(岩土钻掘工程),2012,39(4):27-30. LI Huanhuan.Optimized design of ultra-short radius horizontal well[J].Exploration Engineering(Rock Soil Drilling and Tunneling),2012,39(4):27-30.
  • 期刊类型引用(9)

    1. 马西涛,王迎欣,马睿文,戴文伟,万娇,熊宗茜,黄剑英,吴亚芊,赵丰. 反相乳液聚合法制备抗盐型两性共聚物P(AM-AA-AMPS-DAC)乳液. 江西化工. 2024(02): 64-67+71 . 百度学术
    2. 何世伟,靳永红,王磊,王犁,鲁红升. 橡胶颗粒增强双网络结构堵水冻胶性能研究. 石油与天然气化工. 2024(03): 73-78 . 百度学术
    3. 尚成新,伏露瑶,范旭泽,林家良,刘嘉春. 聚丙烯酰胺树脂的反相悬浮聚合制备及吸水性能研究. 化学研究与应用. 2024(08): 1861-1867 . 百度学术
    4. 杨鹂,张春梅,梅开元,李尚东,程小伟,钟紫芩,李心雨,吴琦美. 油井水泥用抗分散聚合物的制备及其性能评价. 中国粉体技术. 2024(05): 132-145 . 百度学术
    5. 罗志锋,张浩飞,赵立强,何杰,扶浩然,赵金明,闫朝宗. 耐200℃高温、低伤害压裂液稠化剂. 油田化学. 2024(03): 393-399+405 . 百度学术
    6. 罗梓轩,袁斌,张世阔,邢艳斌,张相春. 耐温水基聚合物压裂液制备及性能评价. 当代化工. 2024(09): 2036-2039+2044 . 百度学术
    7. 杨嫱,贺雪红,孙连爽. 纳米氧化铝颗粒强化泡沫压裂液稳定性研究. 精细石油化工. 2024(06): 39-42 . 百度学术
    8. 周柄男,丁秋炜,吴婧,张昕,张宇,滕大勇. 压驱用不对称双子型表面活性剂的制备与复配及性能评价. 石油化工. 2024(12): 1779-1786 . 百度学术
    9. 龚嘉顺,李锦锋,李倩,王茜,蔡廷强,黄飞飞,武佳. 新型纳米复合聚合物压裂液体系研究及应用. 钻采工艺. 2023(06): 133-139 . 百度学术

    其他类型引用(4)

计量
  • 文章访问数:  2844
  • HTML全文浏览量:  93
  • PDF下载量:  3094
  • 被引次数: 13
出版历程
  • 收稿日期:  2015-06-25
  • 修回日期:  2015-12-02
  • 刊出日期:  1899-12-31

目录

    /

    返回文章
    返回