| [1] |
陈庭根,管志川.钻井工程理论与技术[M].东营:中国石油大学出版社,2006:150-203. CHEN Tinggen,GUAN Zhichuan.Drilling engineering theory and technology[M].Dongying:China University of Petroleum Press,2006:150-203.
|
| [2] |
苏义脑.油气直井防斜打快技术理论与实践[M].北京:石油工业出版社,2003:13-16. SU Yinao.Theory and practice to anti-deflection and fast drilling techniques to oil gas vertical wells[M].Beijing:Petroleum Industry Press,2003:13-16.
|
| [3] |
高宝奎,高德利.直井防斜原理综述[J].石油钻采工艺,1996,18(2):8-13. GAO Baokui,GAO Deli.Overview on controlling in deviation straight well[J].Oil Drilling Production Technology,1996,18(2):8-13.
|
| [4] |
殷朝阳,柏景海,何俊才.直井防斜钻具组合技术综述[J].天然气工业,2000,20(1):50-53. YIN Chaoyang,BO Jinghai,HE Juncai.Review of anti-deflection down-hole assembly technology in straight well[J].Natural Gas Industry,2000,20(1):50-53.
|
| [5] |
孙岿.防斜打快技术现状与对策[J].天然气工业,2003,23(3):67-69. SUN Kui.Characterization and development of techniques for deviation control fast drilling[J].Natural Gas Industry,2003,23(3):67-69.
|
| [6] |
汪海阁,苏义脑.直井防斜打快理论研究进展[J].石油学报,2004,25(3):86-90. WANG Haige,SU Yinao.Progress of theoretical research on deviation control and drilling fast for vertical wells[J].Acta Petrolei Sinica,2004,25(3):86-90.
|
| [7] |
高德利.易斜地层防斜打快钻井理论与技术探讨[J].石油钻探技术,2005,33(5):16-19. GAO Deli.Discussions on theories and techniques about rapid drilling while preventing deviating in formations tending to deflecting[J].Petroleum Drilling Techniques,2005,33(5):16-19.
|
| [8] |
韩福彬,刘修善.新型PDC钻头的防斜打快效果及评价[J].石油钻采工艺,2002,24(4):29-32. HAN Fubin,LIU Xiushan.Effect and evaluation of novel PDC bit for deflection control and fast penetration[J].Oil Drilling Production Technology,2002,24(4):29-32.
|
| [9] |
管志川,史玉才,夏焱,等.底部钻具组合运动状态及钻进趋势评价方法研究[J].石油钻探技术,2005,33(5):24-27. GUAN Zhichuan,SHI Yucai,XIA Yan,et al.Research on motion state of bottom hole assembly and the evaluation method of drilling tendency[J].Petroleum Drilling Techniques,2005,33(5):24-27.
|
| [10] |
史玉才,管志川,夏焱,等.以井斜趋势角为指标优化防斜钻具设计[J].石油钻探技术,2004,32(5):10-12. SHI Yucai,GUAN Zhichuan,XIA Yan,et al.Optimizing the design of bottom-hole assembly in deviation control by the trend angle of deviation[J].Petroleum Drilling Techniques,2004,32(5):10-12.
|
| [11] |
夏焱.底部钻具组合钻进趋势预测研究[D].东营:中国石油大学(华东)石油工程学院,2003. XIA Yan.Research on prediction of the drilling tendencies of bottom hole assembly[D].Dongying:China University of Petroleum(Huadong),School of Petroleum Engineering,2003.
|
| [12] |
郭宗禄,高德利,杨文强,等.下部钻具组合上切点的位置确定方法[J].石油钻探技术,2014,42(2):46-51. GUO Zonglu,GAO Deli,YANG Wenqiang,et al.A method for determining upper tangential point at bottom hole assembly[J].Petroleum Drilling Techniques,2014,42(2):46-51.
|
| [13] |
王德良,钱冠江,魏汝光,等.柔性钟摆钻具组合的应用[J].石油钻探技术,1995,23(3):12-13. WANG Deliang,QIAN Guanjiang,WEI Ruguang,et al.Application of flexible pendulum string assembly[J].Petroleum Drilling Techniques,1995,23(3):12-13.
|
| [14] |
伍贤柱,谭兵.川东地区上部大倾角地层钻井速度的探讨[J].天然气工业,2001,21(2):61-64. WU Xianzhu,TAN Bing.A discussion on raising drilling speed in the upper formations with high angle in Sichuan Region[J].Natural Gas Industry,2001,21(2):61-64.
|
| [15] |
韩来聚,孙铭新,徐济银,等.大倾角地层防斜打直技术[J].石油钻探技术,2001,29(4):36-38. HAN Laiju,SUN Mingxin,XU Jiyin,et al.Drilling techniques to prevent well deviation in formation with high dip angle[J].Petroleum Drilling Techniques,2001,29(4):36-38.
|
百度学术
下载:
