变径气举柱塞变径过程受力分析与试验研究

徐建宁; 胡莉莉; 朱端银; 郭邦瑞; 王泽鹏

doi:10.11911/syztjs.2023046

变径气举柱塞变径过程受力分析与试验研究

西安石油大学机械工程学院, 陕西西安 710065

详细信息

作者简介:
徐建宁（1963—），男，浙江平阳人，1984年毕业于西安石油学院石油矿场机械专业，1995年获西北工业大学机械学专业硕士学位，教授，硕士生导师，主要从事石油钻采机械设计及工作行为分析方面的研究工作。E-mail：xujn@xsyu.edu.cn

通讯作者:
胡莉莉，2420483024@qq.com

中图分类号: TE933⁺.5
计量
- 文章访问数: 210
- HTML全文浏览量: 120
- PDF下载量: 52
出版历程
- 收稿日期: 2022-09-18
- 修回日期: 2023-03-25
- 录用日期: 2023-04-02
- 网络出版日期: 2023-04-06
- 刊出日期: 2023-03-24

Experimental Study on Force Acting on Diameter-Variable Gas Lift Plunger During Diameter Changing

Mechanical Engineering College, Xi’an Shiyou University, Xi’an, Shaanxi, 710065, China

摘要

摘要:
为了满足海上气井复合管柱的变径结构要求，解决气井积液、延长气井生产寿命，设计了一种新型变径柱塞结构，分析了变径柱塞在扩径、碰撞缩径过程中的受力情况。模拟了柱塞排水采气工艺过程，开展了室内变径柱塞变径行为观测、举液量与进气压力测量、举液效率分析等试验。试验结果表明，变径柱塞可在变径管柱中顺利运行，扩径所需进气压力与举液量成正比，该变径密封结构具有良好的举液效率。研究结果可以为变径柱塞在海上气井的应用提供试验依据和理论参考。
- 柱塞气举 /
- 变径柱塞 /
- 安全阀 /
- 排水采气 /
- 气井积液
Abstract:
In order to meet the requirements of the diameter-variable structure of composite pipe strings in offshore gas wells, solve the problem of liquid accumulation in gas wells, and extend the production life of gas wells, a new diameter-variable plunger structure was designed. Force acting on the diameter-variable plunger during diameter enlargement and reduction caused by collision was analyzed. In addition, the plunger drainage and gas production process was simulated, and tests were carried out, such as laboratory diameter-changing behavior observation, measurement of liquid lifting capacity and intake pressure, and analysis of liquid lifting efficiency of the diameter-variable plunger. The research results show that the diameter-variable plunger can run smoothly in the diameter-variable pipe string, and the intake pressure required for diameter enlargement is proportional to the liquid lifting capacity. The diameter-variable sealing structure has excellent liquid lifting efficiency. The research results can provide an experimental basis and theoretical reference for the application of diameter-variable plungers in offshore gas wells.
- plunger gas lifting /
- diameter-variable plunger /
- safety valve /
- drainage and gas production /
- liquid accumulation in gas wells

HTML全文

图 1 变径柱塞结构示意

Figure 1. Schematic diagram of variable diameter plunger structure

下载: 全尺寸图片幻灯片

图 2 变径柱塞扩径状态结构示意

Figure 2. Diameter enlargement of diameter-variable plunger

下载: 全尺寸图片幻灯片

图 3 变径柱塞扩径受力分析

Figure 3. Force acting on diameter-variable plunger during diameter enlargement

下载: 全尺寸图片幻灯片

图 4 举液量与进气压力的关系曲线

Figure 4. Relationship between lifting capacity and intake pressure

下载: 全尺寸图片幻灯片

图 5 变径柱塞缩径受力分析

Figure 5. Force acting on diameter-variable plunger during diameter reduction

下载: 全尺寸图片幻灯片

图 6 变径柱塞试验管柱示意

Figure 6. Experimental pipe string of diameter-variable plunger

下载: 全尺寸图片幻灯片

图 7 变径柱塞变径状态对比

Figure 7. Comparison of diameter-changing status of diameter-variable plunger

下载: 全尺寸图片幻灯片

图 8 举液量与进气量的关系曲线

Figure 8. Relationship between liquid lifting capacity and air intake capacity

下载: 全尺寸图片幻灯片

图 9 进气阀开度与举液效率的关系曲线

Figure 9. Relationship between intake valve opening and liquid lifting efficiency

下载: 全尺寸图片幻灯片

参考文献(20)

[1]	冯国强,隋义勇,冯国勇. 柱塞举升优化设计及敏感性分析[J]. 石油钻探技术,2007,35(5):104–107. FENG Guoqiang, SUI Yiyong, FENG Guoyong. Optimum design and sensitivity analysis for plunger lift[J]. Petroleum Drilling Techniques, 2007, 35(5): 104–107.
[2]	杜磊,王春凯. 柱塞气举排水采气技术研究[J]. 辽宁化工,2022,51(6):860–862. DU Lei, WANG Chunkai. Study on the technology of gas extraction by plunger gas lift[J]. Liaoning Chemical Industry, 2022, 51(6): 860–862.
[3]	魏凯. 气田柱塞气举主体工艺技术探讨[J]. 石化技术,2022,29(12):79–81. WEI Kai. Discussion on the main process technology of gas field plunger gas lift[J]. Petrochemical Industry Technology, 2022, 29(12): 79–81.
[4]	肖雨阳,李军亮. 柱塞气举排水采气井工作制度优化方法研究[J]. 天然气与石油,2022,40(6):81–87. XIAO Yuyang, LI Junliang. Study on optimization method of working system of plunger gas lift drainage gas production well[J]. Natural Gas and Oil, 2022, 40(6): 81–87.
[5]	ZHAO Kunpeng, MU Lijun, TIAN Wei, et al. Gas-liquid flow seal in the smooth annulus during plunger lifting process in gas wells[J]. Journal of Natural Gas Science and Engineering, 2021, 95: 104195. doi: 10.1016/j.jngse.2021.104195
[6]	杨树坤,郭宏峰,郝涛,等. 海上油田电控智能控水采油工具研制及性能评价[J]. 石油钻探技术,2022,50(5):76–81. YANG Shukun, GUO Hongfeng, HAO Tao, et al. Development and performance evaluation of an electrically controlled intelligent water control and oil recovery tool for offshore oilfields[J]. Petroleum Drilling Techniques, 2022, 50(5): 76–81.
[7]	谭晓华,罗安,李晓平,等. 柱塞排水采气工艺适应性判别方法实验及理论研究[J]. 科学技术与工程,2023,23(3):1042–1047. TAN Xiaohua, LUO An, LI Xiaoping, et al. Experimental and theoretical study on the adaptability of plunger drainage gas production process[J]. Science Technology and Engineering, 2023, 23(3): 1042–1047.
[8]	郎宝山. 稠油水平井大直径封漏堵水管柱的研制与应用[J]. 特种油气藏,2022,27(3):157–162. LANG Baoshan. Development and application of large-eiameter sealing-plugging string in the heavy-oil horizontal well[J]. Specail Oil & Gas Reservoirs, 2022, 27(3): 157–162.
[9]	刘尧文,明月,张旭东,等. 涪陵页岩气井“套中固套”机械封隔重复压裂技术[J]. 石油钻探技术,2022,50(3):86–91. LIU Yaowen, MING Yue, ZHANG Xudong, et al. “Casing in casing” mechanical isolation refracturing technology in Fuling shale gas wells[J]. Petroleum Drilling Techniques, 2022, 50(3): 86–91.
[10]	邵英博. 浅析海上油井井下安全阀的工作原理及技术分析[J]. 中国石油和化工标准与质量,2019,39(10):243–244. SHAO Yingbo. Analysis of the working principle and technical analysis of downhole safety valves for offshore oil wells[J]. China Petroleum and Chemical Standard and Quality, 2019, 39(10): 243–244.
[11]	迟国安,段秉红,高守华,等. 海上安全阀在线校验技术的应用探析[J]. 中国设备工程,2021(增刊1):58–61. CHI Guoan, DUAN Binghong, GAO Shouhua, et al. Application of online calibration technology for offshore safety valves[J]. China Plant Engineering, 2021(supplement1): 58–61.
[12]	蒋召平,王通,李海涛,等. 海上耐高温深水式井下安全阀的设计与试验[J]. 石油机械,2019,47(8):74–78. JIANG Zhaoping, WANG Tong, LI Haitao, et al. Design and test of high temperature deep-water subsurface safety valve[J]. China Petroleum Machinery, 2019, 47(8): 74–78.
[13]	陈晓宇,朱党辉,王大江,等. 柱塞排水采气技术在涪陵页岩气田的试验应用[J]. 钻采工艺,2021,44(4):52–56. CHEN Xiaoyu, ZHU Danghui, WANG Dajiang, et al. Experimental application of plunger drainage gas production technology in Fuling Shale Gas Field[J]. Drilling & Production Technology, 2021, 44(4): 52–56.
[14]	刘华敏,李牧,刘乔平,等. 涪陵页岩气田柱塞气举工艺研究与应用[J]. 石油钻探技术,2020,48(3):102–107. LIU Huamin, LI Mu, LIU Qiaoping, et al. Research and application of plunger gas lift technology in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2020, 48(3): 102–107.
[15]	冷冰. 火驱同心双管分层注气管柱研制及试验[J]. 特种油气藏,2020,27(4):149–155. LENG Bing. Development and test of concentric dual-tube zonalGas injection string in fire-flooding[J]. Special Oil & Gas Reserviors, 2020, 27(4): 149–155.
[16]	吴勇,伊向艺,卢渊. 不关井连续生产柱塞气举技术研究[J]. 内蒙古石油化工,2008,34(9):3–4. WU Yong, YI Xiangyi, LU Yuan. The research of continuous production plunger airlift without well off technique[J]. Inner Mongolia Petrochemical Industry, 2008, 34(9): 3–4.
[17]	SY/T 7623—2021 柱塞气举技术规范[S]. SY/T 7623—2021 Specification for plunger lift[S].
[18]	周越,张国锋. 对等温条件下理想气体伯努利方程的讨论[J]. 物理与工程,2021,31(1):22–24. ZHOU Yue, ZHANG Guofeng. A discussion on the Bernoulli’s equation of ideal gas under isothermal condition[J]. Physics and Engineering, 2021, 31(1): 22–24.
[19]	师浩文,刘捷,罗威,等. 棒状柱塞气举液体漏失模型研究[J]. 西安石油大学学报(自然科学版),2022,37(1):101–106. SHI Haowen, LIU Jie, LUO Wei, et al. Study on liquid leakage model of rod plunger gas lift[J]. Journal of Xi'an Shiyou University (Natural Science Edition), 2022, 37(1): 101–106.
[20]	周际永. 不关井连续生产柱塞气举排水采气工艺研究[D]. 成都: 成都理工大学, 2006. ZHOU Jiyong. Plunger lift drainage water gas production technology research for well startup continuous production[D]. Chengdu: Chengdu University of Technology, 2006.