Experimental Study on Rock Breaking of Conical PDC Cutter
-
摘要: 为优化锥形PDC齿钻头的结构设计并提高其钻进硬地层的能力,通过锥形PDC切削齿在玄武岩上的破岩试验,分析了切削角、锥顶角及钻压等因素对锥形PDC切削齿破岩效率的影响规律。结果表明:锥形PDC齿适合其锥尖指向钻头轴线安装在钻头上;随着切削角增大,切削深度先增大后减小,当切削角为25°时,切削深度最深;破碎相同体积的岩石,锥顶角小的锥形PDC齿所需的水平切削力小,更易破碎岩石;切削深度与钻压呈指数关系,随着钻压增加而增大。试验结果可为锥形PDC齿钻头结构设计提供依据。Abstract: In order to optimize the structure of PDC bits and improve their breaking performance in hard formations, this paper analyzed the influences of cutting angle, cone apex angle, weight on bit (WOB) and other factors of rock breaking of conical PDC cutter, through experiment with basalt.The results showed that the conical cutter was better to be installed on the bit with its prong pointing the bit axis.With the increase of the cutting angle, the cutting depth increased first and then decreased-to the maximum when the cutting angle was 25°.The conical PDC cutter with small cone apex angle required smaller force to break the same volume of rock and the cutting depth increased with the WOB exponentially.The experimental results could provide reference for the design of a conical PDC bit.
-
Keywords:
- PDC bit /
- conical cutter /
- rock breaking /
- cutting angle /
- cone apex angle /
- cutting depth
-
-
[1] 罗恒荣, 唐玉响, 徐玉超, 等.新型定向井PDC钻头的研制与应用[J].石油钻探技术, 2007, 35(5):86-89. Luo Hengrong, Tang Yuxiang, Xu Yuchao, et al.Research and application of a new PDC bit in directional well[J].Petroleum Drilling Techniques, 2007, 35(5):86-89. [2] 杨顺辉, 武汉杰, 牛成成, 等.特种孕镶块加强PDC钻头的研制与试验[J].石油钻探技术, 2014, 42(6):111-114. Yang Shunhui, Wu Hanjie, Niu Chengcheng, et al.Manufacture and application of PDC bit enhanced by special diamond-impregnated segment[J].Petroleum Drilling Techniques, 2014, 42(6):111-114. [3] 常领, 陈华忠.PDC钻头在胜利油田深井钻井中的应用[J].石油钻探技术, 2007, 35(4):92-93. Chang Ling, Chen Huazhong.Application of PDC bits to deep wells in Shengli Oilfield[J].Petroleum Drilling Techniques, 2007, 35(4):92-93. [4] Durrand C J, Skeem M R, Hall D R.Thick PDC, shaped cutters for geothermal drilling:a fixed cutter solution for a roller cone drilling environment: the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, Salt Lake City, June 27-30, 2010[C].
[5] 于鹏.适应硬地层的犁削型PDC钻头研究[D].青岛:中国石油大学(华东)石油工程学院, 2013. Yu Peng.Reseach on plow-crushing PDC bit adapted to hard formation[D].Qingdao:China University of Petroleum(Huadang), School of Petroleum Engineering, 2013. [6] 邹德永, 于鹏, 杨光.硬地层破岩工具最新进展[J].石油机械, 2013, 41(6):1-5. Zou Deyong, Yu Peng, Yang Guang.Latest development of rock-crushing tools adapted to hard formation[J].China Petroleum Machinery, 2013, 41(6):1-5. [7] 刘亚军, 王晓鹏, 王昆剑, 等.绥中36-1油田新型钻头的优化设计及应用[J].断块油气田, 2011, 18(5):669-671. Liu Yajun, Wang Xiaopeng, Wang Kunjian, et al.Optimization design and application of new drill bit in SZ36-1 Oilfield[J].Fault-Block oil Gas Field, 2011, 18(5):669-671. [8] Michael Azar, Allen White, Steven Segal, et al.Pointing towards improved PDC bit performance:innovative stinger shaped polycrystalline diamond element achieves higher rop and total footage[R].SPE/IADC 163521, 2013.
[9] Jonak J.Influence of friction on the chip size in cutting the brittle materials[J].Journal of Mining Science, 2001, 37(4):407-410.
[10] Kou S Q, Lindqvist P A, Tang C A, et al.Numerical simulation of the cutting of inhomogeneous rocks[J].International Journal of Rock Mechanics and Mining Sciences, 1999, 36(5):711-717.
[11] Sunal O.Parametric study of a single PDC cutter with a numerical model[D].Morgantown:West Virginia University, 2009.
[12] Mendoza J A, Gamwo I K, Zhang W, et al.Discrete element modeling of rock cutting using crushable particles:the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, Salt Lake City, June 27-30, 2010[C].
[13] Pierry Joelle, Robert Charlier.Finite element modelling of shear band localisation and application to rock cutting by a PDC tool[R].SPE 28052, 1994.
计量
- 文章访问数: 3880
- HTML全文浏览量: 167
- PDF下载量: 4813
下载:
