Citation: | PANG Rende, CUI Shasha, HAN Jiyong, LUO Jingjing, LIU Yafei, CHEN Junwei. Research and Application of Drilling, Milling-Grinding Techniques for Drilling out Composite Bridge Plugs in Coiled Tubing in Horizontal Wells[J]. Petroleum Drilling Techniques, 2016, 44(1): 57-62. DOI: 10.11911/syztjs.201601011 |
[1] |
陈立人,张永泽,龚惠娟.连续油管钻井技术与装备的应用及其新进展[J].石油机械,2006,34(2):59-63. CHEN Liren,ZHANG Yongze,GONG Huijuan.Application and new progress of coiled tubing drilling technology and equipment[J].China Petroleum Machinery,2006,34(2):59-63.
|
[2] |
刘寿军,李根生.我国连续管技术面临的挑战和发展建议[J].石油机械,2013,41(11):1-5. LIU Shoujun,LI Gensheng.Challenges for China’s coiled tubing technology and development suggestions[J].China Petroleum Machinery,2013,41(11):1-5.
|
[3] |
DUAN Mingqin,MISKA S,YU Mengjiao,et al.Transport of small cuttings in extended-reach drilling[J].SPE Drilling Completion,2008,23(3):258-265.
|
[4] |
宋先知,李根生,王梦抒,等.连续油管钻水平井岩屑运移规律数值模拟[J].石油钻探技术,2014,42(2):28-32. SONG Xianzhi,LI Gensheng,WANG Mengshu,et al.Numerical simulation on cuttings carrying regularity for horizontal wells drilled with coiled tubing[J].Petroleum Drilling Techniques,2014,42(2):28-32.
|
[5] |
Williams C E Jr,Bruce G H.Carrying capacity of drilling muds[J].Journal of Petroleum Technology,1951,3(4):111-120.
|
[6] |
曲洪娜,黄中伟,李根生,等.水平井旋转射流冲砂洗井水力参数设计方法[J].石油钻探技术,2011,39(6):39-43. QU Hongna,HUANG Zhongwei,LI Gensheng,et al.Hydraulic parameters of sand-flushing with rotating jets in horizontal wells[J].Petroleum Drilling Techniques,2011,39(6):39-43.
|
[7] |
李洪乾,杲传良,任耀秀,等.水平井钻井第二洗井区环空止动返速的计算[J].石油钻探技术,1995,23(增刊1):27-29,85. LI Hongqian,GAO Chuanliang,REN Yaoxiu,et al.Calculations of annular slip velocity in the 2nd cleaning area during horizontal drilling[J].Petroleum Drilling Techniques,1995,23(supplement 1):27-29,85.
|
[8] |
窦国仁.再论泥沙起动流速[J].泥沙研究,1996(6):1-9. Dou Guoren,Incipient motion of coarse and fine sediment[J].Journal of Sediment Research,1999(6):1-9.
|
[9] |
赖枫鹏,李治平,岑芳,等.水平井水力冲砂最优工作参数计算[J].石油钻探技术,2007,35(1):69-71. LAI Fengpeng,LI Zhiping,CEN Fang,et al.Optimum working parameters for hydraulic sand washing in horizontal wells[J].Petroleum Drilling Techniques,2007,35(1):69-71.
|
[10] |
陈迎春,张仕民,王文明,等.连续油管屈曲力学特性研究进展[J].石油矿场机械,2013,42(12):15-20. CHEN Yingchun,ZHANG Shimin,WANG Wenming,et al.Study progress in buckling behavior of coiled tubing[J].Oil Field Equipment,2013,42(12):15-20.
|
[11] |
汪海阁,刘希圣,丁岗,等.水平井水平井段环空压耗模式的建立[J].石油大学学报(自然科学版),1996,20(2):30-35. WANG Haige,LIU Xisheng,DING Gang,et al.Development of model in annular space of for pressure drop horizontal well[J].Journal of the University of Petroleum,China(Edition of Natural Science),1996,20(2):30-35.
|
[12] |
沈忠厚.水射流理论与技术[M].东营:石油大学出版社,1997:176-210. SHEN Zhonghou.Theory and technology of water jet[M].Dongying:University of Petroleum Press,1997:176-210.
|
[1] | WU Xiaoguang, HUANG Zhongwei, LI Gensheng, SHI Huaizhong, LIU Shoujun, LIU Xin. Research and Field Test of Ultra-Short Radius Horizontal Drilling Technology Combining Coiled Tubing and Flexible BHA[J]. Petroleum Drilling Techniques, 2022, 50(6): 56-63. DOI: 10.11911/syztjs.2022119 |
[2] | HAO Dilong, HE Xia, WANG Guorong, FANG Xing, LIAO Daisheng, FANG Haihui. Optimization of the Structural Design of the Integral Slip of a Soluble Bridge Plug[J]. Petroleum Drilling Techniques, 2019, 47(1): 69-75. DOI: 10.11911/syztjs.2018151 |
[3] | LAN Chengyu, DING Yuqi, LIU Jubao, DAI Ziwei, ZHOU Huiyu, LIU Yuxi. Force Analysis and Test of Bridge Plug Drilling[J]. Petroleum Drilling Techniques, 2018, 46(1): 68-74. DOI: 10.11911/syztjs.2018032 |
[4] | ZHANG Yaming, GAO Zhentao, LI Jun, YANG Jing, ZHANG Yi, ZHANG Yanru. The Deep and Slim Casing Milling Technology of Well SU7 in Suqiao Gas Storage[J]. Petroleum Drilling Techniques, 2017, 45(3): 38-41. DOI: 10.11911/syztjs.201703007 |
[5] | WEI Liao, MA Lanrong, ZHU Mintao, WU Jinxia, ZHU Yujie, HAN Feng. Development and Performance Evaluation of Dissolvable Balls for Large Borehole Bridge Plug Fracturing[J]. Petroleum Drilling Techniques, 2016, 44(1): 90-94. DOI: 10.11911/syztjs.201601017 |
[6] | Wang Weijia, Xiong Jiangyong, Zhang Guofeng, Zhao Ming, Shang Qiong. Auxiliary Fracturing and Testing of Gas in Shale Gas Well with Coiled Tubing[J]. Petroleum Drilling Techniques, 2015, 43(5): 88-93. DOI: 10.11911/syztjs.201505015 |
[7] | Hu Liang, Gao Deli. Study on a Method for Tool Face Re-Orientation with Coiled Tubing Drilling[J]. Petroleum Drilling Techniques, 2015, 43(2): 50-53. DOI: 10.11911/syztjs.201502009 |
[8] | Feng Dejie, Li Guofeng, Zhao Yong. ø139.7 mm Plug-Drilling-Free Well Cementing Completion Technology[J]. Petroleum Drilling Techniques, 2014, 42(5): 131-134. DOI: 10.11911/syztjs.201405024 |
[9] | Li Ning, Hu Guanghui, Li Qiang, Ai Zhengqing, Li Zaoyuan. Application of Plug-Drilling-Free Selective Completion Technology in the Tarim Oilfield[J]. Petroleum Drilling Techniques, 2014, 42(5): 68-73. DOI: 10.11911/syztjs.201405012 |
[10] | Song Xianzhi, Li Gensheng, Wang Mengshu, Yi Can, Su Xinliang. Numerical Simulation on Cuttings Carrying Regularity for Horizontal Wells Drilled with Coiled Tubing[J]. Petroleum Drilling Techniques, 2014, 42(2): 28-32. DOI: 10.3969/j.issn.1001-0890.2014.02.006 |
1. |
何斌斌,柳华杰,郑若臣,步玉环,殷慧,霍美桦,张军义,马小龙. 盐岩地层矿物离子对水泥浆性能的影响规律. 中国石油大学学报(自然科学版). 2024(06): 85-94 .
![]() | |
2. |
周军,胡承强,彭井宏,梁光川,黄薪宇,马俊杰,王涛. 基于腔体稳定性的盐岩储气库注采方案优化研究. 断块油气田. 2023(01): 161-167 .
![]() | |
3. |
霍宏博,刘东东,陶林,王德英,宋闯,何世明. 基于CO_2提高采收率的海上CCUS完整性挑战与对策. 石油钻探技术. 2023(02): 74-80 .
![]() | |
4. |
王涛,申峰,展转盈,窦倩,郭庆. 页岩气小井眼水平井纳米增韧水泥浆固井技术. 石油钻探技术. 2023(03): 51-57 .
![]() | |
5. |
孙晓峰,陶亮,朱志勇,于福锐,孙铭浩,赵元喆,曲晶瑀. 页岩储层水平扩径井段固井顶替效率数值模拟研究. 特种油气藏. 2023(04): 139-145 .
![]() | |
6. |
赵新学,陈鹏,王木乐,郭伟成,马文涛,王世红,郭永胜. 普光气田套管补贴用抗硫膨胀管及其性能测试. 断块油气田. 2023(06): 1034-1039 .
![]() | |
7. |
俞天喜,王雷,陈蓓蓓,孙锡泽,李圣祥,朱振龙. 基于盐溶和蠕变作用的含盐储层裂缝导流能力变化规律研究与应用. 特种油气藏. 2023(06): 157-164 .
![]() |