Volume 43 Issue 2
Mar.  2015
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Hu Liang, Gao Deli. Study on a Method for Tool Face Re-Orientation with Coiled Tubing Drilling[J]. Petroleum Drilling Techniques, 2015, 43(2): 50-53. DOI: 10.11911/syztjs.201502009
Citation: Hu Liang, Gao Deli. Study on a Method for Tool Face Re-Orientation with Coiled Tubing Drilling[J]. Petroleum Drilling Techniques, 2015, 43(2): 50-53. DOI: 10.11911/syztjs.201502009
shu

Study on a Method for Tool Face Re-Orientation with Coiled Tubing Drilling

  • Key Laboratory of Petroleum Engineering Education Ministry, China University of Petroleum (Beijing), Beijing, 102249, China

More Information
  • Received Date: October 12, 2014
  • Revised Date: February 05, 2015
    Graphical Abstract
    • Abstract
  • In order to solve the problems in tool face orientation with coiled tubing drilling, this paper presents a method to drill a directional well with a two-section design. Based on the theory of azimuth correcting on an inclined-plane and the skill of re-orientating the tool face, a two-arc directional design model was established, and the corresponding constraint equations set for trajectory deign could be solved using numerical iteration method, so as to finalize the well trajectory design which would meet the requirements of directional drilling. Calculation results from an actual well design showed that re-orientation of tool face could meet the requirements of directional drilling, and the well trajectory was designed as a smooth curve within the all constraints of the well. The study results concluded that the two-arc directional design model could meet the needs of directional drilling and the theoretic design was feasible in drilling practice, so problems with directional correction had been solved that would be useful to the drilling practice on location.
    • FullText(HTML)
    • References (18)
  • [1]
    Byrom T G.Coiled-tubing drilling in perspective[J].Journal of Petroleum Technology,1999,51(6):57-61.
    [2]
    Fraser R G,Ravensbergen J.Improving the performance of coiled tubing underbalanced horizontal drilling operations[R].SPE 74841,2002.
    [3]
    Cox R J,Li Jeff,Lupick G S.Horizontal underbalanced drilling of gas wells with coiled tubing[J].SPE Drilling Completion,1999,14(1):3-10.
    [4]
    Scherschel S R,Graves D G.Underbalanced-directional drilling with coiled tubing:challenges and solutions[R].SPE 37062,1996.
    [5]
    Crouse P C,Lunan W B.Coiled tubing drilling: expanding application key to future[R].SPE 60706,2000.
    [6]
    宋先知,李根生,王梦抒,等.连续油管钻水平井岩屑运移规律数值模拟[J].石油钻探技术,2014,42(2):28-32. Song Xianzhi,Li Gensheng,Wang Mengshu,et al. Numerical simulation on cuttings carrying regularity for horizontal wells drilled with coiled tubing[J].Petroleum Drilling Techniques,2014,42(2):28-32.
    [7]
    吕选鹏,周承富,陈辉,等.连续管技术在页岩气勘探开发中应用前景[J].石油矿场机械,2012,41(2):67-70. Lv Xuanpeng,Zhou Chengfu,Chen Hui,et al.Coiled tubing technology prospect in exploration and development of shale gas[J].Oil Field Equipment,2012,41(2):67-70.
    [8]
    陈朝伟,周英操,申瑞臣,等. 连续管钻井减摩技术综述[J].石油钻探技术,2010,38(1):29-31. Chen Zhaowei,Zhou Yingcao,Shen Ruichen,et al. Overview of drag reducing technologies in coiled tubing drilling[J].Petroleum Drilling Techniques,2010,38(1):29-31.
    [9]
    Zegarra E,Meek D,Cassee U,et al.Intelligent wireless orienter for coiled tubing drilling:development to field test[R].SPE 74836,2002.
    [10]
    Garfield G L,Mackenzie G.Latest developments and new technology for coiled-tubing sidetracking applications[R].SPE 112587,2008.
    [11]
    贺会群.连续管钻井技术与装备[J].石油机械,2009,37(7):1-6. He Huiqun.The technology and equipment of coiled tubing drilling[J].China Petroleum Machinery,2009,37(7):1-6.
    [12]
    Turner D R,Harris T W R,Slater M,et al.Electric coiled tubing drilling:a smarter CT drilling system[R].SPE 52791,1999.
    [13]
    Tinkham S K,Meek D E,Staal T W.Wired BHA applications in underbalanced coiled tubing drilling[R].SPE 59161,2000.
    [14]
    刘修善.井眼轨道几何学[M].北京:石油工业出版社,2006:133-138. Liu Xiushan.Geometry of wellbore trajectory[M].Beijing:Petroleum Industry Press,2006:133-138.
    [15]
    高德利.复杂结构井优化设计与钻完井控制技术[M].东营:中国石油大学出版社,2011:3-5. Gao Deli.Optimized design and control techniques for drilling and completion of complex-structure wells[M].Dongying:China University of Petroleum Press,2011:3-5.
    [16]
    韩志勇.定向钻井设计与计算[M].东营:中国石油大学出版社,2007:285-291. Han Zhiyong.Design and calculation of directional drilling[M].Dongying:China University of Petroleum Press,2007:285-291.
    [17]
    鲁港,佟长海,夏泊洢,等.空间圆弧轨迹的矢量描述技术[J].石油学报,2014,35(4):759-764. Lu Gang,Tong Changhai,Xia Boyi,et al.Vector description of spatial-arc wellbore trajectory[J].Acta Petrolei Sinica,2014,35(4):759-764.
    [18]
    冯果忱.非线性方程组迭代解法[M].上海:上海科学技术出版社,1989:130-168. Feng Guochen.Iterative solution of nonlinear equations[M].Shanghai:Shanghai Science and Technology Press,1989:130-168.
    • Related Articles

  • Related Articles

    [1]ZHANG Guilin. Modification of the Relative Time Method Calculation Formula for Oil and Gas Up-Channeling Velocity[J]. Petroleum Drilling Techniques, 2024, 52(1): 32-37. DOI: 10.11911/syztjs.2023102
    [2]LAI Jianqiang, LU Gang, ZHOU Chao, LU Tianqi. Numerical Integral Calculation in Borehole Trajectory Model[J]. Petroleum Drilling Techniques, 2023, 51(3): 45-50. DOI: 10.11911/syztjs.2023004
    [3]ZHAO Xiangyang, ZHAO Cong, WANG Peng, LIANG Xiaoyang, YANG Mou. A Comparative Study on the Calculation Accuracy of Numerical and Analytical Models for Wellbore Temperature in Ultra-Deep Wells[J]. Petroleum Drilling Techniques, 2022, 50(4): 69-75. DOI: 10.11911/syztjs.2022035
    [4]YAO Xiaojiang, LU Huatao, SHANG Jie, WANG Qinghua, LI Yang. Optimization Design and Numerical Analysis of Flow Passage Converters in LWD Tools[J]. Petroleum Drilling Techniques, 2021, 49(5): 121-126. DOI: 10.11911/syztjs.2021069
    [5]CHEN Zhongshuai, WU Zhonghua, SI Yinghui. Development and Testing of a Graphene-Modified Sponge Coring Tool[J]. Petroleum Drilling Techniques, 2020, 48(6): 71-75. DOI: 10.11911/syztjs.2020111
    [6]LI Meng, HE Huiqun, XIN Yongan, LOU Erbiao, ZHANG Yunfei. Tool Face Orientation by Using an Electric-Hydraulic Orienter during Coiled Tubing Drilling[J]. Petroleum Drilling Techniques, 2016, 44(6): 48-54. DOI: 10.11911/syztjs.201606008
    [7]LI Cui, GAO Deli, LIU Qinglong, KONG Xue. A Method of Calculating of Avoiding Collisions with Adjacent Wells Using Electromagnetic Ranging Surveying while Drilling Tools[J]. Petroleum Drilling Techniques, 2016, 44(5): 52-59. DOI: 10.11911/syztjs.201605009
    [8]Li Longlong, Wu Minglu, Yao Jun, Li Yang, Li Xiaoxue. Calculation Method of the Productivity of Partially Perforated Vertical Well[J]. Petroleum Drilling Techniques, 2014, 42(3): 80-89. DOI: 10.3969/j.issn.1001-0890.2014.03.016
    [9]Song Xianzhi, Li Gensheng, Wang Mengshu, Yi Can, Su Xinliang. Numerical Simulation on Cuttings Carrying Regularity for Horizontal Wells Drilled with Coiled Tubing[J]. Petroleum Drilling Techniques, 2014, 42(2): 28-32. DOI: 10.3969/j.issn.1001-0890.2014.02.006
    [10]Li Hao, Sun Baojiang, Gao Yonghai, Wang Jintang, Wang Ning. Design and Calculation of Hydraulic Parameters for Controlling Mud Cap in Deepwater Drilling[J]. Petroleum Drilling Techniques, 2013, 41(3): 13-18. DOI: 10.3969/j.issn.1001-0890.2013.03.003

  • Cited by

    Periodical cited type(5)

    1. 滕先林. 四川威远地区页岩气藏储层纵向可动用程度分析. 中外能源. 2023(08): 52-57 .
    2. 张莉娜，任建华，胡春锋. 常压页岩气立体开发特征及缝网干扰规律研究. 石油钻探技术. 2023(05): 149-155 . 本站查看
    3. 岑涛，夏海帮，雷林. 渝东南常压页岩气压裂关键技术研究与应用. 油气藏评价与开发. 2020(05): 70-76 .
    4. 孙林，杨万有，李旭光，熊培祺. 海上油田爆燃压裂技术研究与现场试验. 石油钻探技术. 2019(05): 91-96 . 本站查看
    5. 王宏，赖枫鹏，张伟，陈野啸. 非均质低渗透气藏压裂直井产能计算. 断块油气田. 2019(06): 728-733 .

    Other cited types(4)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (3291) PDF downloads (4341) Cited by(9)
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return