Evaluation Methods for Initial Productivity of Directional Wells in Offshore Fault Block Oilfields

Zhang Lijun; Tian Ji; Zhu Guojin

doi:10.11911/syztjs.201501019

Volume 43 Issue 1

Jan. 2015

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2015 > 43(1): 111-116. > DOI: 10.11911/syztjs.201501019

Zhang Lijun, Tian Ji, Zhu Guojin. Evaluation Methods for Initial Productivity of Directional Wells in Offshore Fault Block Oilfields[J]. Petroleum Drilling Techniques, 2015, 43(1): 111-116. DOI: 10.11911/syztjs.201501019

Citation:

PDF (2121 KB)

Evaluation Methods for Initial Productivity of Directional Wells in Offshore Fault Block Oilfields

1.
CNOOC Research Institute, Beijing, 100027, China;
2.
State Key Laboratory of Offshore Exploitation, Beijing, 100027, China

More Information

Received Date: April 21, 2014

Graphical Abstract

Abstract

Abstract

To quantitatively determine the testing time and boundary correction factor of productivity evaluation with DSTs in oilfields with faults, unstable productivity equations were developed under different boundary conditions, and dimensionless oil production index curves were obtained. esting time and its correction factor under different fault distance and angle were derived.It was demonstrated that the productivity correction factor was roughly between 0.60-0.80 in this oilfield, and the correction factor varied over testing time.The example results from two production wells demonstrated that the theoretical analysis productivity correction factor was verified by the actual production dynamic data. Further it also verified the reliability of productivity correction factor charts.It concluded that the productivity correction factor under different boundary conditions decreased with testing time and boundary distance.Operators can use charts with productivity correction coefficients to determine the correction factor for offshore oil well productivity evaluation.
- testing time,
- productivity,
- fault block oilfield,
- DST,
- correction factor

FullText(HTML)

References (17)

References

[1]	李波, 罗宪波, 刘英, 等.海上稠油油田合理单井产能预测新方法[J].中国海上油气, 2008, 20(4):243-245. Li Bo, Luo Xianbo, Liu Ying, et al.A new method to predict reasonable deliverability of individual wells in offshore heavy oilfields[J].China Offshore Oil and Gas, 2008, 20(4):243-245.
[2]	罗宪波, 赵春明, 刘英.海上稠油油田投产初期产能评价研究[J].断块油气田, 2011, 18(5):630-633. Luo Xianbo, Zhao Chunming, Liu Ying.Study on deliverability evaluation of offshore heavy oi1 field at initial stage of production[J].Fault-Block Oil Gas Field, 2011, 18 (5):630-633.
[3]	毛志强, 李进福.油气层产能预测方法及模型[J].石油学报, 2000, 21(5):8-11. Mao Zhiqiang, Li Jinfu.Reservoir productivity prediction method and model[J]. Acta Petrolei Sinica, 2000, 21(5):8-11.
[4]	马奎前, 刘英宪, 苏彦春.渤海S油田高含水期加密井产能评价[J].断块油气田, 2013, 20(1):71-73. Ma Kuiqian, Liu Yingxian, Su Yanchun.Productivity evaluation of infill well at high water cut stage in S Oilfield, Bohai Bay[J].Fault-Block Oil Gas Field, 2013, 20(1):71-73.
[5]	罗远儒, 陈勉, 金衍, 等.水平井不同产能计算方法探讨[J].断块油气田, 2012, 19(1):95-98. Luo Yuanru, Chen Mian, Jin Yan, et al.Discussion on different calculation methods of productivity for horizontal well[J].Fault-Block Oil Gas Field, 2012, 19(1):95-98.
[6]	廖新维, 沈平平.现代试井分析[M].北京:石油工业出版社, 2002:107-115. Liao Xinwei, Shen Pingping.Modern well test analysis[M].Beijing: Petroleum Industry Press, 2002:107-115.
[7]	Van Everdingen A F, Hurst W.The application of Laplace transformation to flow problems in reservoirs[J].Journal of Petroleum Technology, 1949, 1(12):305-324.
[8]	Fikri J Kuchuk.Radius of investigation for reserve estimation from pressure transient well[R].SPE 120515, 1987.
[9]	张雁.利用不稳定产能评价检验试井解释参数合理性[J].油气井测试, 2007, 16(1):20-22. Zhang Yan.By using unsteady productivity evaluation method to check rationality of well testing interpreting parameter[J].Well Testing, 2007, 16(1):20-22.
[10]	陈淑芳.用不稳定试井确定产能方程的新方法[J].天然气工业, 1994, 14(4):55-57. Chen Shufang.A new way to determine capacity equation by unstable testing[J].Natural Gas Industry, 1994, 14(4):20-22.
[11]	余碧君, 毛伟, 王春瑞.应用地层测试流动段资料确定油井稳定产能方法研究[J].油气井测试, 2003, 12(2):9-11. Yu Bijun, Mao Wei, Wang Chunrui.A method study for predicting oil well steady-state deliverability by applying formation testing flow period data[J].Well Testing, 2003, 12(2):9-11.
[12]	林学春, 刘立志, 汪芸, 等.测试资料在张海5 断块产能和储层评价中应用[J].油气井测试, 2012, 21(3):17-19. Lin Xuechun, Liu Lizhi, Wang Yun, et al.Application of test data in production and reservoir evaluation for Zhanghai 5 Fault Block[J].Well Testing, 2012, 21(3):17-19.
[13]	李传亮.油藏工程[M].北京:石油工业出版社, 2005:239-252. Li Chuanliang.Oil reservoir engineering[M].Beijing:Petroleum Industry Press, 2005:239-252.
[14]	王新海, 夏位荣.不稳定试井边界效应分析[J].油气井测试, 1994, 4(4):25-28. Wang Xinhai, Xia Weirong.Unstable testing boundary effect analysis[J].Well Testing, 1994, 4(4):25-28.
[15]	王新海, 谢又新, 张延星.调查半径与地层损害表皮系数的关系[J].钻采工艺, 2002, 25(4):25-27. Wang Xinhai, Xie Youxin, Zhang Yanxing.The relation between radius of investigation and formation damage[J].Drilling Production Technology, 2002, 25(4):25-27.
[16]	杨同玉, 张福仁, 邓广渝.应用DST测试资料研究油井损害半径和渗透率的新方法[J].油气采收率技术, 1996, 3(2):42-46. Yang Tongyu, Zhang Furen, Deng Guangyu.A new method for studying well damage radius and permeability from drillstem test(DST) data[J].Oil Gas Recovery Technology, 1996, 3(2):42-46.
[17]	刘能强.实用现代试井解释方法[M].北京:石油工业出版社, 2008:142-168. Liu Nengqiang.Practical modern well test interpretation method[M].Beijing: Petroleum Industry Press, 2008:142-168.

Cited By

Cited by

Periodical cited type(2)

1.	张桂兰，曾从良. 高导流压裂技术在新疆油田的应用与分析. 内蒙古石油化工. 2023(12): 83-90 .
2.	张丽萍，李一强，舒振辉，赵田，王航，韩礼红. 新疆油田玛湖地区套管损坏机理及主控因素研究. 石油管材与仪器. 2022(05): 26-31 .

Other cited types(0)

Get Citation

PDF

XML

Article Metrics

Article views (3778) PDF downloads (4631) Cited by(2)

Evaluation Methods for Initial Productivity of Directional Wells in Offshore Fault Block Oilfields

Abstract

References

Cited by

Periodical cited type(2)

Other cited types(0)

Catalog

Article Metrics

Related

Evaluation Methods for Initial Productivity of Directional Wells in Offshore Fault Block Oilfields

Abstract

References

Cited by

Periodical cited type(2)

Other cited types(0)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content