| Citation: |
JI Zhaosheng, YUAN Guodong, CHAO Wenxue, et al. Key technology for speeding up and improving efficiency of ultra-deep slim-hole directional drilling in Tarim Basin [J]. Petroleum Drilling Techniques, 2024, 52(4)：8-14. DOI: 10.11911/syztjs.2024064
|
In view of the problems such as low rate of penetration (ROP), short bit life, degumming and threading off of conventional screw drill tool, poor stability of drilling fluid, and simultaneous occurrence of blowout and leakage in pay zones in ultra-deep slim-hole directional drilling in the platform basin area of the Tarim Basin, the key technology for speeding up and improving efficiency in ultra-deep slim-hole directional drilling in Tarim Basin was developed. The technology used the standard drilling rate of a trip and bit footage as indicators and employed statistical analysis method to select bit KS1352DGRX with a diameter of ϕ149.2 mm / ϕ165.1 mm and bit KDM1062TR with a diameter of ϕ120.7 mm applicable to the target layer. By comparing the current situation of high-temperature resistant screws in China and abroad, Chinese high-temperature resistant screws were recommended for bottomhole temperatures below 180 °C. Otherwise, it was recommended to use metal screws or imported high-temperature resistant screws. The small-sized friction and drag reduction tools were designed using theoretical analysis combined with numerical simulation methods, and the tools’ position was optimized. Optimal salt-resistant, high-temperature, and high-pressure filtrate reducers and inhibitors were selected, and deoxidizers were developed. Reasonable pH control and calcium ion supplementation measures were made, and a temperature-resistant drilling fluid system for 200 °C was formed. The characteristics of blowout and leakage in the same layer in the pay zones of Shunbei Oilfield were analyzed, and the basic principle of well control featuring “density reduction + wellhead pressure control + optimized displacement” was determined. The key technology for speeding up and improving efficiency in ultra-deep slim-hole directional drilling in Tarim Basin was applied in five wells. The average ROP of the slim-hole section was increased by 113.24%, and the average hole diameter expansion rate was 5.57%. The average drilling cycle was shortened by 35.03%, and none of the wells had bottom hole failures and other complex conditions. The key technology for speeding up and improving efficiency in ultra-deep slim-hole directional drilling have provided the technical supports for the exploration and development of Tarim Basin.
| [1] |
高利君,李宗杰,李海英,等. 塔里木盆地超深层碳酸盐岩规模储层分类对比及特征分析[J]. 地质论评,2020,66(增刊1):54-56.
GAO Lijun, LI Zongjie, LI Haiying, et al. Classification and characteristic analysis of super-deep carbonate reservoirs in Tarim Basin[J]. Geological Review, 2020, 66(supplement 1): 54-56.
|
| [2] |
马永生,蔡勋育,云露,等. 塔里木盆地顺北超深层碳酸盐岩油气田勘探开发实践与理论技术进展[J]. 石油勘探与开发,2022,49(1):1–17. doi: 10.11698/PED.2022.01.01
MA Yongsheng, CAI Xunyu, YUN Lu, et al. Practice and theoretical and technical progress in exploration and development of Shunbei ultra-deep carbonate oil and gas field, Tarim Basin, NW China[J]. Petroleum Exploration and Development, 2022, 49(1): 1–17. doi: 10.11698/PED.2022.01.01
|
| [3] |
刘彪,潘丽娟,张俊,等. 顺北区块超深小井眼水平井优快钻井技术[J]. 石油钻探技术,2016,44(6):11–16.
LIU Biao, PAN Lijuan, ZHANG Jun, et al. The optimized drilling techniques used in ultra-deep and slim-hole horizontal wells of the Shunbei Block[J]. Petroleum Drilling Techniques, 2016, 44(6): 11–16.
|
| [4] |
尤东华,曹自成,徐明军,等. 塔里木盆地奥陶系鹰山组多类型白云岩储层成因机制[J]. 石油与天然气地质,2020,41(1):92–101. doi: 10.11743/ogg20200109
YOU Donghua, CAO Zicheng, XU Mingjun, et al. Genetic mechanism of multi-type dolomite reservoirs in Ordovician Yingshan Formation, Tarim Basin[J]. Oil & Gas Geology, 2020, 41(1): 92–101. doi: 10.11743/ogg20200109
|
| [5] |
陈宗琦,刘湘华,白彬珍,等. 顺北油气田特深井钻井完井技术进展与发展思考[J]. 石油钻探技术,2022,50(4):1–10. doi: 10.11911/syztjs.2022069
CHEN Zongqi, LIU Xianghua, BAI Binzhen, et al. Technical progress and development consideration of drilling and completion engineering for ultra-deep wells in the Shunbei Oil & Gas Field[J]. Petroleum Drilling Techniques, 2022, 50(4): 1–10. doi: 10.11911/syztjs.2022069
|
| [6] |
温杰文. 超深小井眼地层测试工艺技术研究及应用[J]. 钻采工艺,2019,42(6):50–53. doi: 10.3969/J.ISSN.1006-768X.2019.06.15
WEN Jiewen. Research and application of formation test technology in ultra-deep slimholes[J]. Drilling & Production Technology, 2019, 42(6): 50–53. doi: 10.3969/J.ISSN.1006-768X.2019.06.15
|
| [7] |
漆立新. 塔里木盆地顺北地区海相超深碳酸盐岩油气勘探物探技术需求与创新应用[J]. 石油物探,2023,62(3):381–394. doi: 10.12431/issn.1000-1441.2023.62.03.001
QI Lixin. Technical demand and innovative application of geophysical exploration technology for marine ultra-deep carbonate rocks in Shunbei Area, Tarim Basin[J]. Geophysical Prospecting for Petroleum, 2023, 62(3): 381–394. doi: 10.12431/issn.1000-1441.2023.62.03.001
|
| [8] |
张煜,李海英,陈修平,等. 塔里木盆地顺北地区超深断控缝洞型油气藏地质−工程一体化实践与成效[J]. 石油与天然气地质,2022,43(6):1466–1480. doi: 10.11743/ogg20220615
ZHANG Yu, LI Haiying, CHEN Xiuping, et al. Practice and effect of geology-engineering integration in the development of ultra-deep fault-controlled fractured-vuggy oil/gas reservoirs, Shunbei Area, Tarim Basin[J]. Oil & Gas Geology, 2022, 43(6): 1466–1480. doi: 10.11743/ogg20220615
|
| [9] |
马鸿彦,孔凡刚,杨金生,等. 超深超高温潜山气井AT-6X井小井眼侧钻技术[J]. 石油钻采工艺,2020,42(2):143–149.
MA Hongyan, KONG Fangang, YANG Jinsheng, et al. Slim-hole sidetracking techniques used in Well AT-6X, a gas well in the ultradeep and ultrahigh temperature buried hill[J]. Oil Drilling & Production Technology, 2020, 42(2): 143–149.
|
| [10] |
康海涛,白俊成,蔡云平,等. 马深1井超深小钻孔井眼准备及套管下入技术[J]. 石油钻采工艺,2016,38(5):583–587.
KANG Haitao, BAI Juncheng, CAI Yunping, et al. The preparing and running casing technology of super deep and slim hole in Well Mashen-1[J]. Oil Drilling & Production Technology, 2016, 38(5): 583–587.
|
| [11] |
李亚南,于占淼,晁文学,等. 顺北评2H超深小井眼侧钻水平井技术[J]. 石油钻采工艺,2018,40(2):169–173.
LI Yanan, YU Zhanmiao, CHAO Wenxue, et al. Ultra-deep slim horizontal well sidetracking technology applied in Well Shunbeiping 2H[J]. Oil Drilling & Production Technology, 2018, 40(2): 169–173.
|
| [12] |
康鹏,李琰,戴永鹏,等. 哈拉哈塘ϕ104.8 mm小井眼超深定向井难点分析及改进方向[J]. 钻采工艺,2019,42(3):122–124. doi: 10.3969/J.ISSN.1006-768X.2019.03.36
KANG Peng, LI Yan, DAI Yongpeng, et al. Challenges of ultradeep directional drilling in ϕ104.8 mm ultra-slim hole at Halahatang and improvements to be made[J]. Drilling & Production Technology, 2019, 42(3): 122–124. doi: 10.3969/J.ISSN.1006-768X.2019.03.36
|
| [13] |
孙明光. 顺北油田超深小井眼水平井定向钻井技术[J]. 钻采工艺,2020,43(2):19–22. doi: 10.3969/J.ISSN.1006-768X.2020.02.05
SUN Mingguang. Directional drilling technique for ultra-deep horizontal slimhole wells in Shunbei Oilfield[J]. Drilling & Production Technology, 2020, 43(2): 19–22. doi: 10.3969/J.ISSN.1006-768X.2020.02.05
|
| [14] |
彭军,夏梦,曹飞,等. 塔里木盆地顺北一区奥陶系鹰山组与一间房组沉积特征[J]. 岩性油气藏,2022,34(2):17–30. doi: 10.12108/yxyqc.20220202
PENG Jun, XIA Meng, CAO Fei, et al. Sedimentary characteristics of Ordovician Yingshan Formation and Yijianfang Formation in Shunbei-1 Area, Tarim Basin[J]. Lithologic Reservoirs, 2022, 34(2): 17–30. doi: 10.12108/yxyqc.20220202
|
| [15] |
于洋,南玉民,李双贵,等. 顺北油田古生界钻井提速技术[J]. 断块油气田,2019,26(6):780–783.
YU Yang, NAN Yumin, LI Shuanggui, et al. Technology for increasing drilling speed of Paleozoic stratum in Shunbei Oilfield[J]. Fault-Block Oil & Gas Field, 2019, 26(6): 780–783.
|
| [16] |
李文霞,王居贺,王治国,等. 顺北油气田超深高温水平井井眼轨迹控制技术[J]. 石油钻探技术,2022,50(4):18–24. doi: 10.11911/syztjs.2022073
LI Wenxia, WANG Juhe, WANG Zhiguo, et al. Wellbore trajectory control technologies for ultra-deep and high-temperature horizontal wells in the Shunbei Oil & Gas Field[J]. Petroleum Drilling Techniques, 2022, 50(4): 18–24. doi: 10.11911/syztjs.2022073
|
| [17] |
舒义勇,孙俊,曾东,等. 塔里木油田跃满西区块高温恒流变钻井液研究与现场试验[J]. 石油钻探技术,2021,49(5):39–45. doi: 10.11911/syztjs.2021037
SHU Yiyong, SUN Jun, ZENG Dong, et al. Study and field test of drilling fluid with constant rheology at high temperature in West Yueman Block, Tarim Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(5): 39–45. doi: 10.11911/syztjs.2021037
|
| [18] |
陈志,陈兴明,汪宏林,等. 塔中高含硫喷漏同层堵漏技术研究[J]. 石化技术,2017,24(2):33–34. doi: 10.3969/j.issn.1006-0235.2017.02.028
CHEN Zhi, CHEN Xingming, WANG Honglin, et al. Application of plugging in Tazhong high sulfur reservoir with coexistence of blowout and mud loss[J]. Petrochemical Industry Technology, 2017, 24(2): 33–34. doi: 10.3969/j.issn.1006-0235.2017.02.028
|
| [19] |
何成江,姜应兵,文欢,等. 塔河油田缝洞型油藏“一井多控”高效开发关键技术[J]. 石油钻探技术,2022,50(4):37–44.
HE Chengjiang, JIANG Yingbing, WEN Huan, et al. Key technologies for high-efficiency one-well multi-control development of fractured-vuggy reservoirs in Tahe Oilfield[J]. Petroleum Drilling Techniques, 2022, 50(4): 37–44.
|
| [20] |
王建云,韩涛,赵宽心,等. 塔深5井超深层钻井关键技术[J]. 石油钻探技术,2022,50(5):27–33.
WANG Jianyun, HAN Tao, ZHAO Kuanxin, et al. Key drilling technologies for the ultra-deep Well Tashen 5[J]. Petroleum Drilling Techniques, 2022, 50(5): 27–33.
|
| [21] |
王玉伟,陈红汉,曹自成,等. 顺北地区流体活动对储层形成的控制作用[J]. 断块油气田,2023,30(1):44–51.
WANG Yuwei, CHEN Honghan, CAO Zicheng, et al. Controlling effects of fluid activity on reservoir formation in Shunbei Area[J]. Ault-Block Oil & Gas Field, 2023, 30(1): 44–51.
|
| [22] |
刘湘华,杜欢,刘彪,等. 顺北Ⅳ号条带超深高温定向井钻井关键技术[J]. 石油钻采工艺,2022,44(6):665–670.
LIU Xianghua, DU Huan, LIU Biao, et al. Key technology of directional drilling in the ultra-deep high-temperature IV Belt, the Shunbei Oilfield[J]. Oil Drilling & Production Technology, 2022, 44(6): 665–670.
|
| [23] |
李双贵,罗江,于洋,等. 顺北5号断裂带南部压力剖面建立及井身结构优化[J]. 石油钻探技术,2023,51(1):9–15.
LI Shuanggui, LUO Jiang, YU Yang, et al. Establishing pressure profiles and casing program optimization in the Southern Shunbei No.5 Fault Zone[J]. Petroleum Drilling Techniques, 2023, 51(1): 9–15.
|
| 1. |
王遵察，程万，艾昆，胡清海，石育钊. 井工厂井网部署与压裂模式发展现状与展望. 钻探工程. 2024(03): 9-19 .
| |
| 2. |
王学成，乔东宇，王磊，迟启福，徐小喧，郭旭. 连续油管控压封堵作业在康探1井中的应用. 石油和化工设备. 2023(03): 92-95 .
| |
| 3. |
何雨，孟鐾桥，郑友志，吴柄燕，赵军，李斌. 渝西区块页岩气钻井防漏堵漏技术研究. 石油工业技术监督. 2023(07): 58-62 .
| |
| 4. |
孔祥伟，卾玄吉，齐天俊，陈青，任勇，王素兵，李亭，刘宇. 页岩气井复合暂堵泵压数学模型及影响因素. 特种油气藏. 2023(04): 156-162 .
| |
| 5. |
何雷，何林虎，苏文刚，张硕，蒋和平. 油基钻井液固结堵漏技术研究与应用. 石化技术. 2022(04): 64-65 .
| |
| 6. |
何雷，张硕，何天桦，徐兆喜，王光北. 吉木萨尔页岩油油基钻井液防漏堵漏技术研究与应用. 石化技术. 2022(05): 63-65 .
| |
| 7. |
李文哲，于兴川，赖燕，刘厚彬，文雯，张震，吴申尭. 深层脆性页岩井钻井液漏失机理及主控因素. 特种油气藏. 2022(03): 162-169 .
| |
| 8. |
李得新，尹亮先，李培. 纵向裂隙发育地层井漏处理技术探讨. 四川地质学报. 2022(S1): 147-150 .
| |
| 9. |
孙利军，孙铭博，盛哲. 基于MATLAB的颜色识别系统在油田联合站中的应用. 油气田地面工程. 2022(07): 104-108 .
| |
| 10. |
何立成，唐波. 准噶尔盆地超深井钻井技术现状与发展建议. 石油钻探技术. 2022(05): 1-8 .
本站查看
| |
| 11. |
程欢，赵江源，董家滨，赵国明. 涩北气田钻井漏转喷风险预防措施. 石油工业技术监督. 2021(10): 59-62 .
| |
| 12. |
孙威威. 海坨区块高效堵漏体系的优化与应用. 钻探工程. 2021(12): 72-78 .
|
Supervisor：SINOPEC GROUP
Sponsor：Sinopec Research Institute of Petroleum Engineering
Serial Number：CN 11-1763/TE, ISSN 1001-0890
Chief Editor： WANG Minsheng
Supported by: Beijing Renhe Information Technology Co., Ltd. 
Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.
DownLoad: