Liner Cementing Techniques with Small Annular Space for Complicated Deep Wells in the Sun Basin, North Yellow Sea

HU Jinjun; HAN Guanghai; ZHANG Haifeng; SHI Weiji

doi:10.11911/syztjs.2022098

Volume 51 Issue 1

Jan. 2023

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2023 > 51(1): 40-44. > DOI: 10.11911/syztjs.2022098

HU Jinjun, HAN Guanghai, ZHANG Haifeng, et al. Liner cementing techniques with small annular space for complicated deep wells in the Sun Basin, North Yellow Sea [J]. Petroleum Drilling Techniques，2023, 51(1)：40-44. DOI: 10.11911/syztjs.2022098

Citation:

PDF (1831 KB)

Liner Cementing Techniques with Small Annular Space for Complicated Deep Wells in the Sun Basin, North Yellow Sea

1.
CNPC Tianjin Bo-xing Engineering Science & Technology Co., Ltd., Tianjin, 300451, China
2.
Downhole Operation Division, CNPC Offshore Engineering Company Ltd., Tianjin, 300451, China

More Information

Received Date: November 17, 2021
Revised Date: November 28, 2022
Available Online: November 07, 2022

Graphical Abstract

Abstract

Abstract

During the liner cementing with small annular space in the Sun Basin of the North Yellow Sea, lost circulation is severe in gravel layers, and chippings of coal seams cause annular blockage, resulting in low displacement efficiency and poor cementing quality. Considering these problems, this study selected suitable cementing tools and cementing slurry, optimized the wellbore preparation measures, and expanded the annular flow area using the slip-embedded liner hanger with packer. In addition, anti-leakage cement slurry with matrix invasion-resistant fiber was adopted to reduce the risk of lost circulation. In this way, a set of cementing techniques with small annular space were formed for complicated deep wells in the Sun Basin to prevent blockage and lost circulation. These techniques were applied to 4 wells on site, and the results revealed that no blockage and lost circulation occurred during liner cementing. As a result, the cementing quality met standards. Field applications indicated that the developed techniques could effectively solve the problem of poor liner cementing quality in the Sun Basin, suggesting that they could be further promoted and applied. Overall, these techniques are conducive to the further exploration and development of oil and gas resources in this area.
- liner cementing,
- cement slurry,
- lost circulation,
- liner hanger,
- blockage,
- Sun Basin,
- North Yellow Sea

FullText(HTML)

References (23)

References

[1]	刘金萍,王改云,简晓玲,等. 北黄海东部次盆地层序地层格架中烃源岩发育特征与影响因素[J]. 吉林大学学报(地球科学版),2020,50(1):1–17. LIU Jinping, WANG Gaiyun, JIAN Xiaoling, et al. Development and influencing factors of source rock in sequential stratigraphic framework in the eastern sub-basin, North Yellow Sea[J]. Journal of Jilin University(Earth Science Edition), 2020, 50(1): 1–17.
[2]	简晓玲,刘金萍,王改云. 北黄海东部次盆地中新生代原型盆地分析[J]. 中国海上油气,2019,31(1):22–31. JIAN Xiaoling, LIU Jinping, WANG Gaiyun. Analysis of Meso-Cenozoic prototype basins in the east sub-basin, northern Yellow Sea[J]. China Offshore Oil and Gas, 2019, 31(1): 22–31.
[3]	何将启,梁世友,赵永强,等. 北黄海盆地地质构造特征及其在油气勘探中的意义[J]. 海洋地质与第四纪地质,2007,27(2):101–105. HE Jiangqi, LIANG Shiyou, ZHAO Yongqiang, et al. Characteristics of geologic structures of the North Yellow Sea Basin: implications for petroleum explorations[J]. Marine Geology & Quaternary Geology, 2007, 27(2): 101–105.
[4]	吴朗,聂世均,曾凡坤,等. 深井小间隙尾管固井作业风险评价方法[J]. 中国海上油气,2015,27(1):91–95. WU Lang, NIE Shijun, ZENG Fankun, et al. Risk evaluation method of small clearance liner cementing in deep wells[J]. China Offshore Oil and Gas, 2015, 27(1): 91–95.
[5]	张峰,刘子帅,李宁,等. 塔里木库车山前深井窄间隙小尾管固井技术[J]. 钻井液与完井液,2019,36(4):473–479. doi: 10.3969/j.issn.1001-5620.2019.04.014 ZHANG Feng, LIU Zishuai, LI Ning, et al. Cementing small liner strings with narrow clearance in deep wells in the Kuche piedmont structure in Tarim Basin[J]. Drilling Fluid & Completion Fluid, 2019, 36(4): 473–479. doi: 10.3969/j.issn.1001-5620.2019.04.014
[6]	房恩楼, 王晓亮, 张利利, 等. 渤中19-6尾管固井质量提升措施[J]. 石油钻采工艺, 2018, 40（增刊1）: 146−149. FANG Enlou, WANG Xiaoliang, ZHANG Lili, et al. Technologies to improve the quality of liner cementing in BZ19-6 Block[J]. Oil Drilling & Production Technology, 2018, 40(supplemnet 1): 146−149.
[7]	高飞,田宝振,费中明,等. 磴探1井疏松砂岩油层ϕ139.7 mm尾管固井技术[J]. 石油钻采工艺,2021,43(6):727–731. GAO Fei, TIAN Baozhen, FEI Zhongming, et al. ϕ139.7 mm liner cementing technology in the unconsolidated sandstone oil layers of Well Dengtan 1[J]. Oil Drilling & Production Technology, 2021, 43(6): 727–731.
[8]	邓昌松,何思龙,段永贤,等. 复杂超深井KS1井四开尾管固井技术[J]. 石油钻采工艺,2019,41(6):708–713. doi: 10.13639/j.odpt.2019.06.005 DENG Changsong, HE Silong, DUAN Yongxian, et al. Fourth-section liner cementing technology used in the complex ultradeep Well KS1[J]. Oil Drilling & Production Technology, 2019, 41(6): 708–713. doi: 10.13639/j.odpt.2019.06.005
[9]	杨红歧,陈会年,邓天安,等. 元坝气田超深探井小尾管防气窜固井技术[J]. 石油钻采工艺,2020,42(5):592–599. YANG Hongqi, CHEN Huinian, DENG Tian’an, et al. The anti-gas channeling small-liner cementing technology for ultra deep exploration wells of Yuanba Gasfield[J]. Oil Drilling & Production Technology, 2020, 42(5): 592–599.
[10]	张瑞,侯跃全,郭朝辉,等. 川西长裸眼水平井下尾管循环解阻关键技术[J]. 石油钻探技术,2020,48(3):52–57. doi: 10.11911/syztjs.2020040 ZHANG Rui, HOU Yuequan, GUO Zhaohui, et al. Key techniques for eliminating resistance while running liner with circulation in long horizontal openhole wells in the western Sichuan[J]. Petroleum Drilling Techniques, 2020, 48(3): 52–57. doi: 10.11911/syztjs.2020040
[11]	张冠林,徐星,赵聪,等. 国内外高温高压尾管悬挂器技术新进展[J]. 断块油气田,2020,27(1):113–116. ZHANG Guanlin, XU Xing, ZHAO Cong, et al. New development of high temperature and high pressure liner hanger technology in China and abroad[J]. Fault-Block Oil & Gas Field, 2020, 27(1): 113–116.
[12]	马开华,谷磊,叶海超. 深层油气勘探开发需求与尾管悬挂器技术进步[J]. 石油钻探技术,2019,47(3):34–40. doi: 10.11911/syztjs.2019055 MA Kaihua, GU Lei, YE Haichao. The demands on deep oil/gas exploration & development and the technical advancement of liner hangers[J]. Petroleum Drilling Techniques, 2019, 47(3): 34–40. doi: 10.11911/syztjs.2019055
[13]	阮臣良,马兰荣,姜向东,等. 内嵌卡瓦尾管悬挂器的优势与现场应用分析[J]. 钻采工艺,2013,36(2):84–86. doi: 10.3969/J.ISSN.1006-768X.2013.02.24 RUAN Chenliang, MA Lanrong, JIANG Xiangdong, et al. Advantages and application of inner-slip liner hanger[J]. Drilling & Production Technology, 2013, 36(2): 84–86. doi: 10.3969/J.ISSN.1006-768X.2013.02.24
[14]	朱晓丽,张金法,魏书雷. 尾管用内嵌式卡瓦坐挂机构承载能力分析[J]. 石油矿场机械,2018,47(5):84–87. doi: 10.3969/j.issn.1001-3482.2018.05.018 ZHU Xiaoli, ZHANG Jinfa, WEI Shulei. Analysis of carrying capacity of embedded slips for tail pipe[J]. Oil Field Equipment, 2018, 47(5): 84–87. doi: 10.3969/j.issn.1001-3482.2018.05.018
[15]	高果成. 内嵌卡瓦尾管悬挂器在老井侧钻中的优势综合分析[J]. 钻采工艺,2020,43(1):77–80. doi: 10.3969/J.ISSN.1006-768X.2020.01.22 GAO Guocheng. Comprehensive analysis on the advantages of applying inner embedded slips liner hanger in the sidetracking wells[J]. Drilling & Production Technology, 2020, 43(1): 77–80. doi: 10.3969/J.ISSN.1006-768X.2020.01.22
[16]	肖勇,李丹阳,牛阁,等. 新型尾管悬挂器在塔里木油田的适应性研究应用[J]. 钻采工艺,2018,41(2):30–32. doi: 10.3969/J.ISSN.1006-768X.2018.02.09 XIAO Yong, LI Danyang, NIU Ge, et al. Study on applicability of new style liner hanger at Tarim Oilfield[J]. Drilling & Production Technology, 2018, 41(2): 30–32. doi: 10.3969/J.ISSN.1006-768X.2018.02.09
[17]	郭朝辉,李振,罗恒荣. ϕ273.1 mm无限极循环尾管悬挂器在元坝气田的应用研究[J]. 石油钻探技术,2021,49(5):64–69. doi: 10.11911/syztjs.2021004 GUO Zhaohui, LI Zhen, LUO Hengrong. Research and application of a ϕ273.1 mm infinite circulation liner hanger in Yuanba Gas Field[J]. Petroleum Drilling Techniques, 2021, 49(5): 64–69. doi: 10.11911/syztjs.2021004
[18]	路飞飞,于洋,王伟志,等. 顺北油气田防漏固井用封隔式分级箍研制与应用[J]. 石油钻探技术,2022,50(4):31–36. doi: 10.11911/syztjs.2022076 LU Feifei, YU Yang, WANG Weizhi, et al. Development and application of a leakproof stage cementing collar with packer in the Shunbei Oil & Gas Field[J]. Petroleum Drilling Techniques, 2022, 50(4): 31–36. doi: 10.11911/syztjs.2022076
[19]	刘国祥,郭朝辉,孙文俊,等. 新型封隔式尾管悬挂器的研制及应用[J]. 石油钻采工艺,2014,36(5):120–123. doi: 10.13639/j.odpt.2014.05.030 LIU Guoxiang, GUO Zhaohui, SUN Wenjun, et al. Development and application of new isolated liner hanger[J]. Oil Drilling & Production Technology, 2014, 36(5): 120–123. doi: 10.13639/j.odpt.2014.05.030
[20]	胡晋军,张立丽,张耀,等. 埕海油田大斜度井超短尾管固井技术[J]. 石油钻探技术,2021,49(3):81–86. doi: 10.11911/syztjs.2020132 HU Jinjun, ZHANG Lili, ZHANG Yao, et al. Ultra-short liner cementing technology for highly deviated wells in the Chenghai Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(3): 81–86. doi: 10.11911/syztjs.2020132
[21]	李宗要,张海涛,魏群宝,等. 青海油田英西深层水平井固井技术[J]. 钻井液与完井液,2019,36(5):622–628. doi: 10.3969/j.issn.1001-5620.2019.05.017 LI Zongyao, ZHANG Haitao, WEI Qunbao, et al. Technology for cementing deep reservoirs in Yingxi Area, Qinghai Oilfield[J]. Drilling Fluid & Completion Fluid, 2019, 36(5): 622–628. doi: 10.3969/j.issn.1001-5620.2019.05.017
[22]	邹双,冯明慧,张天意,等. 多尺度纤维韧性水泥浆体系研究与应用[J]. 石油钻探技术,2020,48(6):40–46. doi: 10.11911/syztjs.2020084 ZOU Shuang, FENG Minghui, ZHANG Tianyi, et al. Research and application of tough cement slurry systems with multi-scale fiber[J]. Petroleum Drilling Techniques, 2020, 48(6): 40–46. doi: 10.11911/syztjs.2020084
[23]	李斐. 抗高温弹韧性水泥浆体系优化研究[J]. 钻井液与完井液,2021,38(5):623–627. LI Fei. Study on optimization of high temperature cement slurry with elasticity and toughness[J]. Drilling Fluid & Completion Fluid, 2021, 38(5): 623–627.

[1]	YANG Jin, ZHU Guojing, LI Shuzhan, LI Lei, GUAN Shen, SONG Yu. Research on Suction Pile Well Construction Model for Deep Sea Resource Drilling[J]. Petroleum Drilling Techniques, 2023, 51(4): 134-139. DOI: 10.11911/syztjs.2023029
[2]	LU Baoping, HOU Xutian, KE Ke. Achievements and Developing Suggestions of Sinopec’s Drilling Technologies in Arctic Sea[J]. Petroleum Drilling Techniques, 2021, 49(3): 1-10. DOI: 10.11911/syztjs.2021046
[3]	DENG Junyao, LIU Yishan, QIAO Lei, WANG Kailong, HU Kai. Drilling and Completion Technology of Horizontal Wells with Long Horizontal Section in the Yellow River Overlay Area of the Baode Coalbed Methane Field[J]. Petroleum Drilling Techniques, 2021, 49(2): 37-41. DOI: 10.11911/syztjs.2020124
[4]	WU Jiang, LI Yanjun, ZHANG Wandong, YANG Yuhao. Key Drilling Techniques of HTHP Horizontal Wells in Mid-Deep Strata of the Yinggehai Basin, South China Sea[J]. Petroleum Drilling Techniques, 2020, 48(2): 63-69. DOI: 10.11911/syztjs.2019112
[5]	HAN Cheng, HUANG Kaiwen, LUO Ming, LIU Xianyu, DEND Wenbiao. Plugging Technology for HTHP Wells in the Yingqiong Basin of the South China Sea[J]. Petroleum Drilling Techniques, 2019, 47(6): 15-20. DOI: 10.11911/syztjs.2019081
[6]	CAO Huaqing, LONG Zhiping. Key Coring Technologies for the Dainan Formation and Funing Formation in North Jiangsu Basin[J]. Petroleum Drilling Techniques, 2019, 47(2): 28-33. DOI: 10.11911/syztjs.2019019
[7]	JU Ran, GUAN Zhichuan, HUANG Yi, LUO Ming, LI Wentuo, DENG Wenbiao. Optimization of the Casing-Wellbore Gap in Complex Strata of the Ying-Qiong Basin, South China Sea[J]. Petroleum Drilling Techniques, 2019, 47(1): 32-36. DOI: 10.11911/syztjs.2019003
[8]	JIN Junbin. Drilling Fluid Technology for Igneous Rocks in Ultra-Deep Wells in the Shunbei Area, Tarim Basin[J]. Petroleum Drilling Techniques, 2016, 44(6): 17-23. DOI: 10.11911/syztjs.201606003
[9]	Sun Baojiang, Zhang Zhennan. Challenges and Countermeasures for the Drilling and Completion of Deepwater Wells in the South China Sea[J]. Petroleum Drilling Techniques, 2015, 43(4): 1-7. DOI: 10.11911/syztjs.201504001
[10]	Liu Zhengli, Ye Jihua, Tian Ruirui, Yan De. Adaptability of Underwater Tamping for Deepwater Drilling Conductor Installation in South China Sea[J]. Petroleum Drilling Techniques, 2014, 42(1): 41-45. DOI: 10.3969/j.issn.1001-0890.2014.01.008

Cited By

Cited by

Periodical cited type(17)

1.	王大勇，马红滨，李欣龙，熊超，史怀忠，黄中伟，赫文豪. 高压水射流辅助锥形PDC齿破碎花岗岩试验研究. 石油机械. 2024(07): 36-44 .
2.	王鸿远. 锥形与常规PDC齿混合布齿破岩机理研究及钻头研制. 石化技术. 2024(08): 389-391 .
3.	张文波，史怀忠，席传明，张楠，熊超，陈振良. 锥形PDC齿和常规PDC齿混合切削破岩试验研究. 石油机械. 2023(03): 33-39 .
4.	鲍伟伟，赵国辉，徐杨. 大港页岩油水平井优快钻井技术. 中国石油和化工标准与质量. 2023(12): 159-161 .
5.	傅新康，黄中伟，史怀忠，吴洪志，何森林，熊超，赫文豪. 锥形齿与平面齿切削碳酸盐岩特征对比分析. 石油机械. 2023(07): 59-67 .
6.	熊超，黄中伟，王立超，史怀忠，赫文豪，陈振良，李根生. 锥形聚晶金刚石复合片齿破岩特征与机制研究. 岩土力学. 2023(08): 2432-2444 .
7.	徐建飞，陈晖，邹德永，黄勇. 高造斜率定向CDE钻头设计与应用. 机械设计与制造工程. 2023(09): 117-120 .
8.	李彦操. PDC钻头齿的破岩机理和性能测试方法研究现状. 金刚石与磨料磨具工程. 2023(05): 553-567 .
9.	吴泽兵，席凯凯，赵海超，黄海，张文超，杨晨娟. 仿生PDC齿旋转破岩时的温度场和破岩特性模拟研究. 石油钻探技术. 2022(02): 71-77 . 本站查看
10.	刘伟吉，阳飞龙，祝效华，罗云旭，何灵. 异形PDC齿切削破岩提速机理研究. 中国机械工程. 2022(17): 2133-2141 .
11.	胡思成，管志川，路保平，梁德阳，呼怀刚，闫炎，陶兴华. 锥形齿旋冲及扭冲的破岩过程与破岩效率分析. 石油钻探技术. 2021(03): 87-93 . 本站查看
12.	徐卫强，史怀忠，曹权，史杏杏，胡锡辉，熊超，陈晗. 锥形PDC齿破碎砾岩特性试验研究. 石油机械. 2021(09): 9-16 .
13.	麻地辉，薛娟，李毅锐. 水力结构增强型PDC钻头应用分析. 西部探矿工程. 2019(12): 64-65+74 .
14.	汪为涛. 非均质地层锥形辅助切削齿PDC钻头设计与试验. 石油钻探技术. 2018(02): 58-62 . 本站查看
15.	杨顺辉. 新型多重复合切削钻头的研制. 石油机械. 2016(10): 21-24 .
16.	孙源秀，邹德永，郭玉龙，陈修平，易杨. 切削-犁削混合钻头设计及现场应用. 石油钻采工艺. 2016(01): 53-56 .
17.	孙源秀，邹德永，徐城凯，郭玉龙. 锥形聚晶金刚石复合片钻头(PDC)齿与常规PDC齿破岩效果对比试验. 科学技术与工程. 2015(36): 159-162 .

Other cited types(15)

Get Citation

PDF

XML

Article Metrics

Article views (297) PDF downloads (79) Cited by(32)

Liner Cementing Techniques with Small Annular Space for Complicated Deep Wells in the Sun Basin, North Yellow Sea

Abstract

References

Related Articles

Cited by

Periodical cited type(17)

Other cited types(15)

Catalog

Article Metrics

Related

Liner Cementing Techniques with Small Annular Space for Complicated Deep Wells in the Sun Basin, North Yellow Sea

Abstract

References

Related Articles

Cited by

Periodical cited type(17)

Other cited types(15)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content