Key Technology for Drilling and Completion of Shale Gas Horizontal Wells with Ultra-Long Horizontal Sections in Changning Block

WANG Jianlong; FENG Guanxiong; LIU Xuesong; GUO Rui; GAO Xuesheng; HUO Yang

doi:10.11911/syztjs.2020086

Volume 48 Issue 5

Sep. 2020

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2020 > 48(5): 9-14. > DOI: 10.11911/syztjs.2020086

WANG Jianlong, FENG Guanxiong, LIU Xuesong, GUO Rui, GAO Xuesheng, HUO Yang. Key Technology for Drilling and Completion of Shale Gas Horizontal Wells with Ultra-Long Horizontal Sections in Changning Block[J]. Petroleum Drilling Techniques, 2020, 48(5): 9-14. DOI: 10.11911/syztjs.2020086

Citation:

PDF (1418 KB)

Key Technology for Drilling and Completion of Shale Gas Horizontal Wells with Ultra-Long Horizontal Sections in Changning Block

1.
Research Institute of Engineering and Technology, CNPC Bohai Drilling Engineering Co., Ltd., Tianjin, 300280, China
2.
Sichuan Shale Gas Project Management Department, CNPC Bohai Drilling Engineering Co., Ltd., Chengdu, Sichuan, 644000, China
3.
Direcyion Drilling Service Company, CNPC Bohai Drilling Engineering Co., Ltd., Tianjin, 300280,China

More Information

Received Date: February 23, 2020
Revised Date: June 24, 2020
Available Online: July 05, 2020

Graphical Abstract

Abstract

Abstract

In order to solve the technical difficulties such as low ROP, long drilling cycle and high downhole risks of shale gas horizontal wells with ultra-long horizontal section in the Changning Block, with theoretical analysis and software simulation calculations, the well trajectory was optimized, the proper drilling equipment and casing running methods were selected, and technical measures were taken to reduce downhole risks, such as introducing vibration reduction and acceleration, leak prevention and plugging. These technologies were developed to form a key technology for the safe and efficient drilling and completion of shale gas horizontal wells with ultra-long horizontal sections in Changning Block. The technology had been tested in 3 horizontal wells with ultra-long horizontal section in Changning Block, no downhole failure occurred during drilling and completion, while ROP was increased by 2.5% and drilling cycle was shortened by 16.9% compared with the offset wells. This showed that this technology could solve the challenges in drilling and completion of those shale gas horizontal wells with ultra-long horizontal section in Chang-ning Block, ensure the safe and efficient drilling and completion in Changning Block, and could be popularized in this block.
- shale gas,
- horizontal well,
- ultra-long horizontal section,
- penetration rate,
- drilling risk,
- Changning Block

FullText(HTML)

References (11)

References

[1]	万夫磊. 长宁页岩气表层防漏治漏技术研究[J]. 钻采工艺, 2019, 42(4): 28–31. doi: 10.3969/J.ISSN.1006-768X.2019.04.08 WAN Fulei. Research on plugging technology for surface casing drlling of Changning shale gas[J]. Drilling & Production Technology, 2019, 42(4): 28–31. doi: 10.3969/J.ISSN.1006-768X.2019.04.08
[2]	樊好福,臧艳彬,张金成,等. 深层页岩气钻井技术难点与对策[J]. 钻采工艺, 2019, 42(3): 20–23. doi: 10.3969/J.ISSN.1006-768X.2019.03.06 FAN Haofu, ZANG Yanbin, ZHANG Jincheng, et al. Difficulties and countermeasures of deep shale gas drilling technology[J]. Drilling & Production Technology, 2019, 42(3): 20–23. doi: 10.3969/J.ISSN.1006-768X.2019.03.06
[3]	曾义金. 页岩气开发的地质与工程一体化技术[J]. 石油钻探技术, 2014, 42(1): 1–6. doi: 10.3969/j.issn.1001-0890.2014.01.001 ZENG Yijin. Integration technology of geology & engineering for shale gas development[J]. Petroleum Drilling Techniques, 2014, 42(1): 1–6. doi: 10.3969/j.issn.1001-0890.2014.01.001
[4]	许京国,陶瑞东,郑智冬,等. 牙轮–PDC混合钻头在迪北103井的应用试验[J]. 天然气工业, 2014, 34(10): 71–74. doi: 10.3787/j.issn.1000-0976.2014.10.010 XU Jingguo, TAO Ruidong, ZHENG Zhidong, et al. Pilot tests of a roller-PDC hybrid bit in Well Dibei 103, Tarim Basin[J]. Natural Gas Industry, 2014, 34(10): 71–74. doi: 10.3787/j.issn.1000-0976.2014.10.010
[5]	代锋,文永林,黄贵生,等. 空气锤+雾化钻井在低成本开发页岩气中的应用[J]. 石油钻采工艺, 2018, 40(5): 563–566. DAI Feng, WEN Yonglin, HUANG Guisheng, et al. Application of air hammer plus mist drilling in low cost development of shale gas[J]. Oil Drilling & Production Technology, 2018, 40(5): 563–566.
[6]	潘军,刘卫东,张金成. 涪陵页岩气田钻井工程技术进展与发展建议[J]. 石油钻探技术, 2018, 46(4): 9–15. PAN Jun, LIU Weidong, ZHANG Jincheng. Drilling technology progress and recommendations for the Fuling Shale Gas Field[J]. Petroleum Drilling Technioques, 2018, 46(4): 9–15.
[7]	徐良,孙友宏,高科,等. 针对须家河组岩性特征选择仿生金刚石钻头参数[J]. 石油钻探技术, 2008, 36(5): 43–46. XU Liang, SUN Youhong, GAO Ke, et al. Parameter selection of bionics diamond bit for lithology of Xujiahe Formation[J]. Petroleum Drilling Techniques, 2008, 36(5): 43–46.
[8]	牛新明. 涪陵页岩气田钻井技术难点及对策[J]. 石油钻探技术, 2014, 42(4): 1–6. NIU Xinming. Drilling technology challenges and resolutions in Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2014, 42(4): 1–6.
[9]	冯强,陈世春,王建龙,等. 振动减摩阻工具振动参数及安放位置研究[J]. 石油钻探技术, 2018, 46(4): 78–83. FENG Qiang, CHEN Shichun, WANG Jianlong, et al. Research on vibration parameters and determining the position of a vibration friction reducing tool[J]. Petroleum Drilling Techniques, 2018, 46(4): 78–83.
[10]	王建龙,张展豪,冯强,等. 水力振荡器与液力推力器集成应用研究[J]. 石油机械, 2017, 45(4): 44–47. WANG Jianlong, ZHANG Zhanhao, FENG Qiang, et al. Study on the integrated application of hydraulic oscillatorand hydraulic thruster[J]. China Petroleum Machinery, 2017, 45(4): 44–47.
[11]	王建龙,齐昌利,柳鹤,等. 沧东凹陷致密油气藏水平井钻井关键技术[J]. 石油钻探技术, 2019, 47(5): 11–16. WANG Jianlong, QI Changli, LIU He, et al. Key technologies for drilling horizontal wells in tight oil and gas reservoirs in the Cangdong Sag[J]. Petroleum Drilling Techniques, 2019, 47(5): 11–16.

[1]	ZHANG Dongqing, WAN Yunqiang, ZHANG Wenping, DAI Yongbo, ZHANG Jincheng, XU Mingbiao. Optimal and Fast Drilling Technologies for Stereoscopic Development of the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2023, 51(2): 16-21. DOI: 10.11911/syztjs.2022097
[2]	LIU Yaowen, LI Mu. Evaluation on the Production Effect of Coiled Tubing in Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2020, 48(6): 99-103. DOI: 10.11911/syztjs.2020089
[3]	LIU Huamin, LI Mu, LIU Qiaoping, ZHANG Liyuan. Research and Application of Plunger Gas Lift Technology in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2020, 48(3): 102-107. DOI: 10.11911/syztjs.2020022
[4]	LIU Yaowen. Key Technologies of Green Development in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2018, 46(5): 8-13. DOI: 10.11911/syztjs.2018115
[5]	LI Wei, LIU Wenchen, ZHOU Xianhai, NI Hongjian, YU Fan, ZANG Yanbin. 3D Horizontal Wellbore Trajectory Optimization Design Method in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2018, 46(2): 17-23. DOI: 10.11911/syztjs.2018041
[6]	SONG Zheng. Wellbore Trajectory Control Techniques for Horizontal Well in the Jiangdong and Pingqiao Blocks of the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2017, 45(6): 14-18. DOI: 10.11911/syztjs.201706003
[7]	LIU Kuangxiao, WANG Qingjun, LAN Kai, ZHAO Zhuanling. Large Diameter Hole Steering Drilling Technology for Three-Dimensional Horizontal Well in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2016, 44(5): 16-21. DOI: 10.11911/syztjs.201605003
[8]	ZHANG Jincheng, AI Jun, ZANG Yanbin, YANG Haiping, CHEN Xiaofeng. Multi-Well Pad Technology in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2016, 44(3): 9-15. DOI: 10.11911/syztjs.201603002
[9]	SHEN Guobing, LIU Mingguo, CHAO Wenxue, ZHANG Jincheng. 3D Trajectory Control Technology for Horizontal Wells in the Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2016, 44(2): 10-15. DOI: 10.11911/syztjs.201602002
[10]	Niu Xinming. Drilling Technology Challenges and Resolutions in Fuling Shale Gas Field[J]. Petroleum Drilling Techniques, 2014, 42(4): 1-6. DOI: 10.3969/j.issn.1001-0890.2014.04.001

Cited By

Cited by

Periodical cited type(11)

1.	田雨，张昕，张鹏翔，孙耀宁，许晨星，宋西岩. 冲击频率可调的钻井提速工具结构设计与试验. 石油机械. 2024(02): 36-43 .
2.	张诗达，朱勇，高强，苏红. 旋冲钻井技术研究现状与展望. 排灌机械工程学报. 2024(05): 497-507 .
3.	孙养清，易先中，万继方，易军，吴霁薇，刁斌斌，陈志湘. 机械式复合冲击器的工作特性分析. 石油机械. 2024(06): 29-37+108 .
4.	陈炼，宋朝晖，王新东，张武涛，谢正森，粟籽华. 单牙轮钻头楔形牙齿偏转角优化方法. 石油钻探技术. 2023(01): 57-61 . 本站查看
5.	张文波，史怀忠，席传明，张楠，熊超，陈振良. 锥形PDC齿和常规PDC齿混合切削破岩试验研究. 石油机械. 2023(03): 33-39 .
6.	闫炎，韩礼红，刘永红，杨尚谕，曹婧，牟易升. 全尺寸PDC钻头旋转冲击破岩过程数值模拟. 石油机械. 2023(06): 36-42 .
7.	何超，邓虎，罗祝涛，李枝林，徐建超. 扭力冲击器流体仿真优化与试验. 钻采工艺. 2023(04): 26-32 .
8.	王勇军，刘刚，佟铮，赵长亮，郑宇轩，冯守涛. 旋冲螺杆钻具在硬岩地热钻探中的应用研究. 钻探工程. 2023(05): 146-152 .
9.	毛良杰，马茂原，刘立鹏，张伟，陈春宇. 扭力冲击器对钻柱黏滑振动的影响分析. 断块油气田. 2022(04): 545-551 .
10.	王建云，韩涛，赵宽心，张立军，席宝滨，叶翔. 塔深5井超深层钻井关键技术. 石油钻探技术. 2022(05): 27-33 . 本站查看
11.	刘建华，令文学，王恒. 非平面三棱形PDC齿破岩机理研究与现场试验. 石油钻探技术. 2021(05): 46-50 . 本站查看

Other cited types(6)

Get Citation

PDF

XML

Article Metrics

Article views (1059) PDF downloads (301) Cited by(17)

Key Technology for Drilling and Completion of Shale Gas Horizontal Wells with Ultra-Long Horizontal Sections in Changning Block

Abstract

References

Related Articles

Cited by

Periodical cited type(11)

Other cited types(6)

Catalog

Article Metrics

Related

Key Technology for Drilling and Completion of Shale Gas Horizontal Wells with Ultra-Long Horizontal Sections in Changning Block

Abstract

References

Related Articles

Cited by

Periodical cited type(11)

Other cited types(6)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content