Development and Applications of a Compound Axial and Torsional Impact Drilling Tool

LIU Shubin; NI Hongjian; ZHANG Heng

doi:10.11911/syztjs.2020072

Volume 48 Issue 5

Sep. 2020

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2020 > 48(5): 69-76. > DOI: 10.11911/syztjs.2020072

LIU Shubin, NI Hongjian, ZHANG Heng. Development and Applications of a Compound Axial and Torsional Impact Drilling Tool[J]. Petroleum Drilling Techniques, 2020, 48(5): 69-76. DOI: 10.11911/syztjs.2020072

Citation:

PDF (1542 KB)

Development and Applications of a Compound Axial and Torsional Impact Drilling Tool

LIU Shubin^{1, 2,},
NI Hongjian^{1, 2, ,},
ZHANG Heng^{1, 2}

1.
School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong, 266580, China
2.
Key Laboratory of Ministry of Education for Unconventional Oil & Gas Development(China University of Petroleum (East China)), Qingdao, Shandong, 266580, China

More Information

Received Date: November 29, 2019
Revised Date: June 09, 2020
Available Online: July 13, 2020

Graphical Abstract

Abstract

Abstract

To improve the rock-breaking efficiency of PDC bits and reduce stick-slip vibration, a compound axial and torsional impact tool was developed. This tool, characterized by a simple structure and the synchronous action of axial and torsional impacts, is used to break rocks. To do so, it used a self-excited oscillation pulse jet as its energy source, and converted axial impact force into compound axial and torsional impacts through helical surface structure. Field applications showed that: compared with conventional drilling tools, the ROP of this compound axial and torsional impact tool was increased by 95.2%–193.8%, and the footage of a single bit was increased by 46.4%–229.2%. Compared with PDM drills, the ROP of this tool was increased by 71.0% while compared with axial impact tools, the ROP of this tool was increased by 66.3%, and the footage of a single bit was increased by 194.0%. Compared with torsional impact tools, the ROP of this tool was increased by 30.2%–46.8%, and the footage of a single bit was increased by 17.2%–191.8%. The research results showed that the developed compound axial and torsional impact tool can improve rock-breaking efficiency and reduce the stick-slip vibration in hard formations. With its remarkable rock-breaking effects and ROP improvement, this tool is worth of application and widespread implementation.
- impact tool,
- composite impact force,
- rock-breaking efficiency,
- stick-slip vibration,
- PDC bit,
- penetration rate,
- bit footage

FullText(HTML)

References (18)

References

[1]	王德余,李根生,史怀忠,等. 高效破岩新方法进展与应用[J]. 石油机械, 2012, 40(6): 1–6. WANG Deyu, LI Gensheng, SHI Huaizhong, et al. Progress of the high-efficiency rock-breaking method[J]. China Petroleum Machi-nery, 2012, 40(6): 1–6.
[2]	KHORSHIDIAN H, MOZAFFARI M, BUTT S D. The role of natural vibrations in penetration mechanism of a single PDC cutter[R]. ARMA-2012-402, 2012.
[3]	DEEN C A, WEDEL R J, NAYAN A, et al. Application of a torsional impact hammer to improve drilling efficiency[R]. SPE 147193, 2011.
[4]	OSTASEVICIUS V, GAIDYS R, RIMKEVICIENE J, et al. An approach based on tool mode control for surface roughness reduction in high-frequency vibration cutting[J]. Journal of Sound and Vibration, 2010, 329(23): 4866–4879. doi: 10.1016/j.jsv.2010.05.028
[5]	LI X B, SUMMERS D A, RUPERT G, et al. Experimental investigation on the breakage of hard rock by the PDC cutters with combined action modes[J]. Tunnelling and Underground Space Technology, 2001, 16(2): 107–114. doi: 10.1016/S0886-7798(01)00036-0
[6]	WANG Peng, NI Hongjian, WANG Ruihe. A novel vibration drilling tool used for reducing friction and improve the penetration rate of petroleum drilling[J]. Journal of Petroleum Science and Engineering, 2018, 165: 436–443. doi: 10.1016/j.petrol.2018.02.053
[7]	祝效华,刘伟吉. 单齿高频扭转冲击切削的破岩及提速机理[J]. 石油学报, 2017, 38(5): 578–586. doi: 10.7623/syxb201705011 ZHU Xiaohua, LIU Weiji. The rock breaking and ROP rising mechanism for single-tooth high-frequency torsional impact cutting[J]. Acta Petrolei Sinica, 2017, 38(5): 578–586. doi: 10.7623/syxb201705011
[8]	柳贡慧,李玉梅,李军,等. 复合冲击破岩钻井新技术[J]. 石油钻探技术, 2016, 44(5): 10–15. LIU Gonghui, LI Yumei, LI Jun, et al. New technology with composite percussion drilling and rock breaking[J]. Petroleum Drilling Techniques, 2016, 44(5): 10–15.
[9]	POWELL S W, HERRINGTON D, BOTTON B, et al. Fluid hammer increases PDC performance through axial and torsional energy at the bit[R]. SPE 166433, 2013.
[10]	LIU Shubin, NI Hongjian, WANG Xueying, et al. Rock-breaking mechanism study of axial and torsional impact hammer and its application in deep wells[R]. SPE 191077, 2018.
[11]	倪红坚,韩来聚,马清明,等. 水力脉冲诱发井下振动钻井工具研究[J]. 石油钻采工艺, 2006, 28(2): 15–17, 20. doi: 10.3969/j.issn.1000-7393.2006.02.005 NI Hongjian, HAN Laiju, MA Qingming, et al. Study on downhole vibration drilling tool induced by hydropulse[J]. Oil Drilling & Production Technology, 2006, 28(2): 15–17, 20. doi: 10.3969/j.issn.1000-7393.2006.02.005
[12]	雷鹏,倪红坚,王瑞和,等. 自激振荡式旋冲工具在深井超深井中的试验应用[J]. 石油钻探技术, 2013, 41(6): 40–43. doi: 10.3969/j.issn.1001-0890.2013.06.008 LEI Peng, NI Hongjian, WANG Ruihe, et al. Field test of self-excited vibration rotary percussion drilling tool in deep and ultra-deep wells[J]. Petroleum Drilling Techniques, 2013, 41(6): 40–43. doi: 10.3969/j.issn.1001-0890.2013.06.008
[13]	RICHARD T, DAGRAIN F, POYOL E, et al. Rock strength determination from scratch tests[J]. Engineering Geology, 2012, 147: 91–100.
[14]	刘鹏飞．扭转冲击影响PDC钻头粘滑振动的机理研究[D]．青岛: 中国石油大学（华东）, 2017． LIU Pengfei. Study on the influence mechanism of PDC bit stick-slip vibration under torsional impact[D]. Qingdao: China University of Petroleum (East China), 2017.
[15]	KYLLINGSTAD A, HALSEY G W. A study of slip/stick motion of the bit[J]. SPE Drilling Engineering, 1988, 3(4): 369–373. doi: 10.2118/16659-PA
[16]	熊继有,蒲克勇,周健. 库车坳陷山前构造超深井岩石可钻性研究[J]. 天然气工业, 2009, 29(11): 59–61. doi: 10.3787/j.issn.1000-0976.2009.11.018 XIONG Jiyou, PU Keyong, ZHOU Jian. Rock drillability investigation for ultra-deep well drilling at thrust structure of Kuqa depression[J]. Natural Gas Industry, 2009, 29(11): 59–61. doi: 10.3787/j.issn.1000-0976.2009.11.018
[17]	滕学清,文志明,王克雄,等. 塔中岩石可钻性剖面建立和钻头选型研究[J]. 西部探矿工程, 2010, 22(11): 43–45. doi: 10.3969/j.issn.1004-5716.2010.11.014 TENG Xueqing, WEN Zhiming, WANG Kexiong, et al. Research on drillability sections of rocks and bit selection in Tazhong Area[J]. West-China Exploration Engineering, 2010, 22(11): 43–45. doi: 10.3969/j.issn.1004-5716.2010.11.014
[18]	白萍萍．准噶尔盆地中部区块钻头选型[D]．青岛: 中国石油大学（华东）, 2014． BAI Pingping. Bit selection in the center of Junggar Basin[D]. Qingdao: China University of Petroleum (East China), 2014.

[1]	JIANG Le, CHENG Sida, DUAN Hongchao, ZHANG Huaiwen, DU Fu, LI Yong. Research and Applications of Automatic Cementing Technology Based on the AnyCem^® System[J]. Petroleum Drilling Techniques, 2022, 50(5): 34-41. DOI: 10.11911/syztjs.2022024
[2]	ZHANG Zhiliang, WANG Wei, YI Ming, LIU Qiang. Design and Implementation of a Downhole Safety Monitoring System[J]. Petroleum Drilling Techniques, 2020, 48(6): 65-70. DOI: 10.11911/syztjs.2020094
[3]	GUO Hongfeng, YANG Shukun, DUAN Kaibin, JI Gongming, SHI Jingyan, AN Zonghui. An Improved Integrated Reverse Washing, Measuring and Adjusting Zonal Water Injection Process in the Bohai Oilfield[J]. Petroleum Drilling Techniques, 2020, 48(3): 97-101. DOI: 10.11911/syztjs.2020016
[4]	LIU Yigang, CHEN Zheng, MENG Xianghai, ZHANG Le, LAN Fei, SONG Xin. Cable Implanted Intelligent Injection Technology for Separate Injection Wells in Bohai Oilfield[J]. Petroleum Drilling Techniques, 2019, 47(3): 133-139. DOI: 10.11911/syztjs.2019044
[5]	LIU Honglan. A New Integrated Measuring and Adjusting Technology of Separate Layer Water Injection Well[J]. Petroleum Drilling Techniques, 2018, 46(1): 83-89. DOI: 10.11911/syztjs.2018020
[6]	ZHENG Xiaozhi, ZHOU Baode, ZHANG Hongyan, DAI Wenchao, CHEN Zhifeng, LI Fenglei. Development and Performance Tests of Remotely-Controlled Cement Head[J]. Petroleum Drilling Techniques, 2017, 45(4): 81-86. DOI: 10.11911/syztjs.201704014
[7]	Zhang Guilin. Handle Position of the Three-Position Four-Way Directional Control Valve on the Remote Control Console of BOP[J]. Petroleum Drilling Techniques, 2014, 42(6): 8-12. DOI: 10.11911/syztjs.201406002
[8]	Sui Xiuxiang, Liang Yufeng, Li Yiming, Yin Bangtang, Li Xiangfang. Early Monitoring of the Gas-Cut in Deepwater Riser Based on Doppler Measuring System[J]. Petroleum Drilling Techniques, 2014, 42(5): 90-94. DOI: 10.11911/syztjs.201405016
[9]	Qu Junbo, Chen Ping, Ma Tianshou, Huang Wanzhi, Hu Ze. Design and Test of Down-Hole Micro-Flow Device for Monitoring Overflow[J]. Petroleum Drilling Techniques, 2012, 40(5): 106-110. DOI: 10.3969/j.issn.1001-0890.2012.05.023

Cited By

Get Citation

PDF

XML

Article Metrics

Article views PDF downloads

Development and Applications of a Compound Axial and Torsional Impact Drilling Tool

Abstract

References

Related Articles

Catalog

Article Metrics

Related

Development and Applications of a Compound Axial and Torsional Impact Drilling Tool

Abstract

References

Related Articles

Catalog

Article Metrics

Related

Export File

Citation

Format

Content