Key Technologies for Safe and Efficient Drilling of Marine Carbonate  Ultra-Deep Oil and Gas Wells

ZENG Yijin

doi:10.11911/syztjs.2019062

Volume 47 Issue 3

Jun. 2019

Turn off MathJax

Article Contents

Abstract

References

Petroleum Drilling Techniques > 2019 > 47(3): 25-33. > DOI: 10.11911/syztjs.2019062

ZENG Yijin. Key Technologies for Safe and Efficient Drilling of Marine Carbonate Ultra-Deep Oil and Gas Wells[J]. Petroleum Drilling Techniques, 2019, 47(3): 25-33. DOI: 10.11911/syztjs.2019062

Citation:

ZENG Yijin. Key Technologies for Safe and Efficient Drilling of Marine Carbonate Ultra-Deep Oil and Gas Wells[J]. Petroleum Drilling Techniques, 2019, 47(3): 25-33. DOI: 10.11911/syztjs.2019062

Citation:

ZENG Yijin. Key Technologies for Safe and Efficient Drilling of Marine Carbonate Ultra-Deep Oil and Gas Wells[J]. Petroleum Drilling Techniques, 2019, 47(3): 25-33. DOI: 10.11911/syztjs.2019062

PDF (1155 KB)

Key Technologies for Safe and Efficient Drilling of Marine Carbonate Ultra-Deep Oil and Gas Wells

ZENG Yijin^{1, 2,}

1.
Shale Oil and Gas Enrichment Mechanism and Effective Development of State Key Laboratory, Beijing, 100101, China
2.
Sinopec Research Institute of Petroleum Engineering, Beijing, 100101, China

More Information

Received Date: February 16, 2019
Revised Date: May 04, 2019
Available Online: May 12, 2019

Graphical Abstract

Abstract

Abstract

The marine carbonate oil and gas resources in the Tarim Basin and the Sichuan basin have a burial depth of more than 7 000.00 m, with multiple producing formations which exhibit strong heterogeneity, high temperature and high pressure, difficulty in drilling and high risks, all of which result in engineering problems, such as low ROP in drilling/completion, high risk of wellbore integrity failure, etc. To this end, a series of tools and products have been developed, including new drilling speed-up tools, high temperature resistant measuring instruments and cementing tools. Additionally, the following were developet: a high-density drilling fluid system with high temperature resistance; an environmentally-friendly low-friction, high performance plugging system; and an anti-gas channeling cement slurry system. Meanwhile, the rapid drilling technology for penetrating hard formations in a synergistic way. The goal of " precaution-monitoring-control-pressure” closed-loop safety control drilling matching technology for fractured-cave high pressure oil/gas wells was achieved, and key borehole trajectory measurement and control technology for ultra-deep slim hole horizontal wells wee developed. The application of those technologies in drilling many ultra-deep wells with the depth of over 8 000.00 m has set several engineering records, and strongly supported the exploration & development of ultra-deep marine oil/gas wells in Shunbei, Xinjiang and Western Sichuan.

FullText(HTML)

References (29)

References

[1]	金之钧, 蔡勋育, 刘金连, 等. 中国石油化工股份有限公司近期勘探进展与资源发展战略[J]. 中国石油勘探, 2018, 23(1): 14–25. doi: 10.3969/j.issn.1672-7703.2018.01.002 JIN Zhijun, CAI Xunyu, LIU Jinlian, et al. The recent exploration progress and resource development strategy of China Petroleum and Chemical Corporation[J]. China Petroleum Exploration, 2018, 23(1): 14–25. doi: 10.3969/j.issn.1672-7703.2018.01.002
[2]	郭旭升, 胡东风, 李宇平, 等. 四川盆地元坝气田发现与理论技术[J]. 石油勘探与开发, 2018, 45(1): 14–26. GUO Xusheng, HU Dongfeng, LI Yuping, et al. Discovery and theoretical and technical innovations of Yuanba gas field in Sichuan Basin, SW China[J]. Petroleum Exploration and Development, 2018, 45(1): 14–26.
[3]	冯建辉, 蔡勋育, 牟泽辉, 等. 中国石油化工股份有限公司" 十二五”油气勘探进展与" 十三五”展望[J]. 中国石油勘探, 2016, 21(3): 1–13. doi: 10.3969/j.issn.1672-7703.2016.03.001 FENG Jianhui, CAI Xunyu, MOU Zehui, et al. Oil and gas exploration of China Petroleum and Chemical Corporation during the 12^th Five-Year Plan and the prospect for the 13^th Five-Year Plan[J]. China Petroleum Exploration, 2016, 21(3): 1–13. doi: 10.3969/j.issn.1672-7703.2016.03.001
[4]	王汉卿. 鸭深1井取心技术分析[J]. 化工通讯设计, 2018, 44(6): 47–48. WANG Hanqing. Analysis of Coring Technology in Yashen 1 Well[J]. Chemical Engineering Design Communications, 2018, 44(6): 47–48.
[5]	漆立新. 塔里木盆地顺托果勒隆起奥陶系碳酸盐岩超深层油气突破及其意义[J]. 中国石油勘探, 2016, 21(3): 38–51. doi: 10.3969/j.issn.1672-7703.2016.03.004 QI Lixin. Oil and gas breakthrough in ultra-deep Ordovician carbonate formations in Shuntuoguole Uplift, Tarim Basin[J]. China Petroleum Exploration, 2016, 21(3): 38–51. doi: 10.3969/j.issn.1672-7703.2016.03.004
[6]	陈明, 黄志远, 马庆涛, 等. 马深1井钻井工程设计与施工[J]. 石油钻探技术, 2017, 45(4): 15–20. CHEN Ming, HUANG Zhiyuan, MA Qingtao, et al. Design and drilling of Well Mashen 1[J]. Petroleum Drilling Techniques, 2017, 45(4): 15–20.
[7]	潘军, 王敏生, 光新军. PDC钻头新进展及发展思考[J]. 石油机械, 2016, 44(11): 5–13. PAN Jun, WANG Minsheng, GUANG Xinjun. New progress and future development of PDC bit[J]. China Petroleum Machinery, 2016, 44(11): 5–13.
[8]	杨金华, 郭晓霞. PDC钻头技术发展现状与展望[J]. 石油科技论坛, 2018, 37(1): 33–38. doi: 10.3969/j.issn.1002-302x.2018.01.008 YANG Jinhua, GUO Xiaoxia. The present status and outlook of PDC bit technology[J]. Oil Forum, 2018, 37(1): 33–38. doi: 10.3969/j.issn.1002-302x.2018.01.008
[9]	马广军, 王甲昌, 张海平. 螺杆驱动旋冲钻井工具设计及试验研究[J]. 石油钻探技术, 2016, 44(3): 50–54. MA Guangjun, WANG Jiachang, ZHANG Haiping. The design and experimental study of PDM driven rotary percussion drilling tool[J]. Petroleum Drilling Techniques, 2016, 44(3): 50–54.
[10]	马广军, 张海平, 王甲昌. 基于螺杆钻具的旋冲钻井装置设计及试验研究[J]. 石油机械, 2016, 44(6): 24–27. MA Guangjun, ZHANG Haiping, WANG Jiachang. Designed and testing of the positive displacement motor driven rotary percussion drilling device[J]. China Petroleum Machinery, 2016, 44(6): 24–27.
[11]	殷子横, 索忠伟, 张硕坤, 等. ϕ228 mm射流冲击器在涪陵二开的应用研究[J]. 石油机械, 2017, 45(6): 13–16. YIN Ziheng, SUO Zhongwei, ZHANG Shuokun, et al. Application of ϕ228 mm jet impactor in the second spud in Block Fuling[J]. China Petroleum Machinery, 2017, 45(6): 13–16.
[12]	索忠伟, 王甲昌, 张海平, 等. 旋冲钻井在塔河工区超深井段的应用[J]. 石油钻采工艺, 2013, 35(4): 44–46. doi: 10.3969/j.issn.1000-7393.2013.04.010 SUO Zhongwei, WANG Jiachang, ZHANG Haiping, et al. Application of rotary percussion drilling on the super deep section in Tahe Field[J]. Oil Drilling & Production Technology, 2013, 35(4): 44–46. doi: 10.3969/j.issn.1000-7393.2013.04.010
[13]	杨广国, 索忠伟, 王甲昌, 等. 射流冲击器配合PDC钻头在超深井中应用[J]. 石油机械, 2013, 41(4): 31–34. doi: 10.3969/j.issn.1001-4578.2013.04.008 YANG Guangguo, SUO Zhongwei, WANG Jiachang, et al. Application of jet hammer and PDC Bit in superdeep well[J]. China Petroleum Machinery, 2013, 41(4): 31–34. doi: 10.3969/j.issn.1001-4578.2013.04.008
[14]	杨传书. 钻井风险评价系统DrillRisk的研发与应用[J]. 石油钻探技术, 2017, 45(5): 60–67. YANG Chuanshu. Development and application of risk-assessment system for drilling operations[J]. Petroleum Drilling Techniques, 2017, 45(5): 60–67.
[15]	王果, 范红康, 牛新明, 等. 控压钻井线性节流阀及其控制[J]. 石油学报, 2017, 38(8): 955–962. WANG Guo, FAN Hongkang, NIU Xinmin, et al. Linear choke valve and its control technology for managed pressure drilling[J]. Acta Petrolei Sinica, 2017, 38(8): 955–962.
[16]	柴龙,林永学,金军斌,等. 塔河油田外围高温高压井气滞塞防气窜技术[J]. 石油钻探技术, 2018, 46(6): 40–45. CHAI Long, LIN Yongxue, JING Junbin, et al. Anti-gas channeling technology with gas-block plug for high temperature and high pressure wells in the periphery of the Tahe Oilfield[J]. Petroleum Drilling Techniques, 2018, 46(6): 40–45.
[17]	ZHOU Haobo, SUN Mingguang, NIU Xinming, et al. A novel multi-density dynamic well killing method for ultra-deep wells and the simulation system[R]. SPE 193216, 2018.
[18]	潘军, 李大奇. 顺北油田二叠系火成岩防漏堵漏技术[J]. 钻井液与完井液, 2018, 35(3): 42–47. doi: 10.3969/j.issn.1001-5620.2018.03.007 PAN Jun, LI Daqi. Technology of preventing and controlling mud losses into the permian igneous rocks in Shunbei Oilfield[J]. Drilling Fluid & Completion Fluid, 2018, 35(3): 42–47. doi: 10.3969/j.issn.1001-5620.2018.03.007
[19]	曾义金, 李大奇, 杨春和. 裂缝性地层防漏堵漏力学机制研究[J]. 岩石力学与工程学报, 2016, 35(10): 2054–2061. ZENG Yijin, LI Daqi, YANG Chunhe. Leakage prevention and control in fractured formations[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(10): 2054–2061.
[20]	李大奇, 曾义金, 刘四海, 等. 裂缝性地层承压堵漏模型建立及应用[J]. 科学技术与工程, 2018, 18(2): 79–85. doi: 10.3969/j.issn.1671-1815.2018.02.011 LI Daqi, ZENG Yijin, LIU Sihai, et al. Wellbore strengthening model in fractured formation[J]. Science Technology and Engineering, 2018, 18(2): 79–85. doi: 10.3969/j.issn.1671-1815.2018.02.011
[21]	何仲, 刘金华, 方静, 等. 超高温屏蔽暂堵剂SMHHP的室内实验研究[J]. 钻井液与完井液, 2017, 34(6): 18–23. doi: 10.3969/j.issn.1001-5620.2017.06.004 HE Zhong, LIU Jinhua, FANG Jing, et al. Laboratory study on ultra-high temperature temporary plugging agent SMHHP[J]. Drilling Fluid & Completion Fluid, 2017, 34(6): 18–23. doi: 10.3969/j.issn.1001-5620.2017.06.004
[22]	ZENG Yijin, LU Peiqing, ZHOU Shiming, et al. A new prediction model for hydrostatic pressure reduction of anti-gas channeling cement slurry based on large-scale physical modeling experiments[J]. Journal of Petroleum Science and Engineering, 2019, 172: 259–268. doi: 10.1016/j.petrol.2018.09.035
[23]	高元, 桑来玉, 杨广国, 等. 胶乳纳米液硅高温防气窜水泥浆体系[J]. 钻井液与完井液, 2016, 33(3): 67–72. doi: 10.3969/j.issn.1001-5620.2016.03.014 GAO Yuan, SANG Laiyu, YANG Guangguo, et al. Cement slurry treated with latex nano liquid silica anti-gas-migration agent[J]. Drilling Fluid & Completion Fluid, 2016, 33(3): 67–72. doi: 10.3969/j.issn.1001-5620.2016.03.014
[24]	杨广国, 陶谦, 高元, 等. 高温高压气井复合型水泥浆体系研究与应用[J]. 科学技术与工程, 2016, 16(20): 151–155. doi: 10.3969/j.issn.1671-1815.2016.20.026 YANG Guangguo, TAO Qian, GAO Yuan, et al. Research and application of high temperature high pressure gas well complex cement slurry[J]. Science Technology and Engineering, 2016, 16(20): 151–155. doi: 10.3969/j.issn.1671-1815.2016.20.026
[25]	ZENG Yijin, LIU Rengguang, LI Xiaojiang, et al. Cement sheath sealing integrity evaluation under cyclic loading using large-scale sealing evaluation equipment for complex subsurface settings[J]. Journal of Petroleum Science and Engineering, 2019, 176: 811–820. doi: 10.1016/j.petrol.2019.02.014
[26]	尹慧博, 张瑞, 陈武君, 等. 高温高压高酸性油气井用尾管顶部封隔器关键技术研究[J]. 石油钻探技术, 2018, 46(5): 63–68. YIN Huibo, ZHANG Rui, CHEN Wujun, et al. Research on the key technologies of liner top packer for HT/HP and high acidic oil and gas wells[J]. Petroleum Drilling Techniques, 2018, 46(5): 63–68.
[27]	张奎林,谷磊. 尾管顶部封隔器密封胶筒设计与试验[J]. 断块油气田, 2018, 25(3): 381–384. ZHANG Kuilin, GU Lei. Design and experiment research on sealing rubber tube of top packer of liner hanger[J]. Fault-Block Oil & Gas Field, 2018, 25(3): 381–384.
[28]	刘修善. 考虑磁偏角时空变化的实钻轨迹精准定位[J]. 石油学报, 2017, 38(6): 705–709. LIU Xiushan. Positioning the drilled borehole trajectories considering the magnetic declination change in space-time[J]. Acta Petrolei Sinica, 2017, 38(6): 705–709.
[29]	刘修善. 井眼轨迹模式定量识别方法[J]. 石油勘探与开发, 2018, 45(1): 145–148. LIU Xiushan. Quantitative recognition method for borehole trajectory models[J]. Petroleum Exploration and Development, 2018, 45(1): 145–148.

[1]	HU Jinjun, HAN Guanghai, ZHANG Haifeng, SHI Weiji. Liner Cementing Techniques with Small Annular Space for Complicated Deep Wells in the Sun Basin, North Yellow Sea[J]. Petroleum Drilling Techniques, 2023, 51(1): 40-44. DOI: 10.11911/syztjs.2022098
[2]	WANG Zhongliang, ZHOU Yang, WEN Xiaofeng, LONG Bin, DING Fan, CHEN Shaowei. Drilling Technologies for Horizontal Wells with Ultra-Long Horizontal Section and Slim Hole in Changqing Oilfield[J]. Petroleum Drilling Techniques, 2021, 49(5): 14-18. DOI: 10.11911/syztjs.2021060
[3]	LI Yunfeng, PAN Junying, ZHOU Yan, ZHU Kuanliang, WANG Zaiming. Key Technologies for Drilling and Completing Shallow Slim Hole Sidetracking Horizontal Wells in the Jidong Oilfield[J]. Petroleum Drilling Techniques, 2020, 48(6): 8-14. DOI: 10.11911/syztjs.2020090
[4]	ZHEN Jianwu. Research and Field Tests of the Lubrication and Friction Reduction Technology of High Density Drilling Fluid in Horizontal Wells[J]. Petroleum Drilling Techniques, 2020, 48(5): 55-60. DOI: 10.11911/syztjs.2020076
[5]	ZOU Shuqiang, ZHANG Hongwei, Eerqm, LI Xiang. Slim Liner Cementing Technology for Ultra-Deep Wells with a Narrow Annulus in No.1 District of Shunbei Block[J]. Petroleum Drilling Techniques, 2019, 47(6): 60-66. DOI: 10.11911/syztjs.2019114
[6]	FAN Jiqiang, WANG Wei, CHEN Xiaoyuan, HUANG Zhian. Research and Application of Key Technologies for Slim Hole Sidetracking Wells in the Subei Basin[J]. Petroleum Drilling Techniques, 2019, 47(5): 22-27. DOI: 10.11911/syztjs.2019102
[7]	ZHANG Xuefei, ZHANG Wei, XU Xinniu, WANG Junwen, LI Jun, RUAN Biao. High Density Oil-Based Drilling Fluid Deployed in Well H101 in the Southern Margin of the Junggar Basin[J]. Petroleum Drilling Techniques, 2016, 44(1): 34-38. DOI: 10.11911/syztjs.201601007
[8]	Han Fubin, Li Ruiying, Li Guohua, Dai Xiaodong, Chen Shaoyun. Horizontal Slim-Hole Drilling Technology for Deep Tight Glutenite Gas Reservoir in Qingshen Gas Field[J]. Petroleum Drilling Techniques, 2013, 41(5): 56-61. DOI: 10.3969/j.issn.1001-0890.2013.05.011
[9]	Liu Junyi, Qiu Zhengsong, Huang Weian, Xing Xijin, Wang Weiji. Laboratory Research on High Density and High Temperature Drilling and Completion Fluids for Dongfang Gas Field in South China Sea[J]. Petroleum Drilling Techniques, 2013, 41(4): 78-82. DOI: 10.3969/j.issn.1001-0890.2013.04.017
[10]	Yao Yong, Yin Zongguo, Jiao Jianfang, Guo Guangping, Hong Shaoqing. Cementing with Ultra-High Density Slurry in Well Guanshen-1[J]. Petroleum Drilling Techniques, 2013, 41(1): 118-122. DOI: 10.3969/j.issn.1001-0890.2013.01.023

Cited By

Get Citation

PDF

XML

Article Metrics

Article views (4980) PDF downloads (151)

Key Technologies for Safe and Efficient Drilling of Marine Carbonate Ultra-Deep Oil and Gas Wells

Abstract

References

Related Articles

Catalog

Article Metrics

Related

Key Technologies for Safe and Efficient Drilling of Marine Carbonate Ultra-Deep Oil and Gas Wells

Abstract

References

Related Articles

Catalog

Article Metrics

Related

Export File

Citation

Format

Content