Volume 45 Issue 1
Mar.  2017
Turn off MathJax
Article Contents
Abstract
References
Related Articles
LIU Hexing, FANG Manzong, LIU Zhiqin, XU Yilong, MENG Wenbo. Jetting-Based Conductor Running Technology Used in Ultra-Deep Water Well of Lingshui Block in the Western South China Sea[J]. Petroleum Drilling Techniques, 2017, 45(1): 10-16. DOI: 10.11911/syztjs.201701002
Citation: LIU Hexing, FANG Manzong, LIU Zhiqin, XU Yilong, MENG Wenbo. Jetting-Based Conductor Running Technology Used in Ultra-Deep Water Well of Lingshui Block in the Western South China Sea[J]. Petroleum Drilling Techniques, 2017, 45(1): 10-16. DOI: 10.11911/syztjs.201701002
shu

Jetting-Based Conductor Running Technology Used in Ultra-Deep Water Well of Lingshui Block in the Western South China Sea

  • Zhanjiang Branch, CNOOC(China) Co. Ltd., Zhanjiang, Guangdong, 524057, China

More Information
  • Received Date: June 20, 2016
  • Revised Date: December 29, 2016
    Graphical Abstract
    • Abstract
  • The sea area of Lingshui Block in Western South China Sea is rough with average water depth of 1710.00 m. In this paper, jet drilling technology was used to run in conductors in order to ensure the stability of underwater wellheads and improve running efficiency of conductors. First, the load capacity curve of conductors was plotted by analyzing the soil samples taken from shallow sea beds in Lingshui Block. Second, the safe driving depth of conductors in this block was determined by analyzing the load on conductors. Finally, bit stick-out, bit diameter, WOB and hydraulic parameters were optimized by analyzing comprehensively the characteristics of jet drilling technologies and BHA (bottom hole assembly) used for ultra-deep water environments, and then the driving depth of conductors was determined. The jetting-based conductor running technology was applied on 5 wells in the Lingshui Block. Results showed that wellheads in this block were of good stability. The conductors were then run in holes successfully without deviation or subsidence. The successful application of jetting-based conductor running technology of Lingshui ultra-deep water block provides the technical inference for the drilling of similar ultra-deep water wells in the future.
    • FullText(HTML)
    • References (16)
  • [1]
    杨进,严德,田瑞瑞,等.深水喷射下表层导管合理钻头伸出量计算[J].石油勘探与开发,2013,40(3):367-370. YANG Jin,YAN De,TIAN Ruirui,et al.Bit stick-out calculation for the deepwater conductor jetting technique[J].Petroleum Exploration and Development,2013,40(3):367-370.
    [2]
    鞠少栋,畅元江,陈国明,等.深水钻井隔水管连接作业窗口分析[J].石油勘探与开发,2012,39(1):105-110. JU Shaodong,CHANG Yuanjiang,CHEN Guoming,et al.Envelopes for connected operation of the deepwater drilling riser[J].Petroleum Exploration and Development,2012,39(1):105-110.
    [3]
    马飞,宋志辉.水射流动力特性及破土机理[J].北京科技大学学报,2006,28(5):413-416. MA Fei,SONG Zhihui.Dynamic property and breaking soil mechanism of water jet[J].Journal of University of Science and Technology Beijing,2006,28(5):413-416.
    [4]
    BECK R D,JACKSON C W,HAMILTON T K.Reliable deepwater structural casing installation using controlled jetting[R].SPE 22542,1991.
    [5]
    徐荣强,陈建兵,刘正礼,等.喷射导管技术在深水钻井作业中的应用[J].石油钻探技术,2007,35(3):19-22. XU Rongqiang,CHEN Jianbing,LIU Zhengli,et al.The application of jetting technology in deepwater drilling[J].Petroleum Drilling Techniques,2007,35(3):19-22.
    [6]
    刘书杰,杨进,周建良,等.深水海底浅层喷射钻进过程中钻压与钻速关系[J].石油钻采工艺,2011,33(1):12-15. LIU Shujie,YANG Jin,ZHOU Jianliang,et al.Research on relationship between weight-on-bit and drilling rate during jetting drilling in sub-bottom deepwater[J].Oil Drilling Production Technology,2011,33(1):12-15.
    [7]
    苏堪华,管志川,苏义脑.深水钻井导管喷射下入深度确定方法[J].中国石油大学学报(自然科学版),2008,32(4):47-50. SU Kanhua,GUAN Zhichuan,SU Yinao.Determination method of conductor setting depth using jetting drilling in deepwater[J].Journal of China University of Petroleum(Edition of Natural Science),2008,32(4):47-50.
    [8]
    BRIDGE J W.Summary of results from a joint industry study todevelop and improved methodology for predict ion of geopressures for drilling in deepwater[R].SPE 79845,2003.
    [9]
    张辉,高德利,唐海雄,等.深水导管喷射安装过程中管柱力学分析[J].石油学报,2010,31(3):516-520. ZHANG Hui,GAO Deli,TANG Haixiong,et al.Tubular mechanics in jetting operation of conductor under deepwater condition[J].Acta Petrolei Sinica,2010,31(3):516-520.
    [10]
    陈庭根,管志川.钻井工程理论与技术[M].东营:石油大学出版社,2000:52-65. CHEN Tinggen,GUAN Zhichuan.Theory and technology of drilling engineering[M].Dongying:Petroleum UniversityPress,2000:52-65.
    [11]
    胡海良,唐海雄,汪顺文,等.白云6-1-1井深水钻井技术[J].石油钻采工艺,2008,30(6):25-28. HU Hailiang,TANG Haixiong,WANG Shunwen,et al.Deepwater drilling techniques in Baiyun 6-1-1 Well[J].Oil Drilling Production Technology,2008,30(6):25-28.
    [12]
    周波,杨进,周建良,等.深水钻井喷射下导管排量设计方法[J].石油钻探技术,2016,44(3):21-26. ZHOU Bo,YANG Jin,ZHOU Jianliang,et al.A jetting flow rate design method for conductor installation through jetting in deepwater drilling[J].Petroleum Drilling Techniques,2016,44(3):21-26.
    [13]
    李家仪,许亮斌,周建良,等.基于非概率可靠性的喷射导管下入深度设计方法[J].石油钻探技术,2015,43(4):8-12. LI Jiayi,XU Liangbin,ZHOU Jianliang,et al.Design for the setting depth of jetting conductors based on non-probabilistic reliability[J].Petroleum Drilling Techniques,2015,43(4):8-12.
    [14]
    王磊,张辉,周宇阳,等.深水钻井喷射下导管水力参数优化设计方法[J].石油钻探技术,2015,43(2):19-24. WANG Lei,ZHANG Hui,ZHOU Yuyang,et al.Optimal design of hydraulic parameters for conductor jetting in deepwater drilling[J].Petroleum Drilling Techniques,2015,43(2):19-24.
    [15]
    林广辉.随钻下套管技术:在我国南海油田的首次应用[J].中国海上油气(工程),1996,8(1):53-58. LIN Guanghui.Casing while drilling technique first application in China Nanhai[J].China Offshore Oil and Gas(Engineering),1996,8(1):53-58.
    [16]
    翟慧颖,杨进,周建良,等.隔水导管与土壤胶结强度试验分析研究[J].石油钻采工艺,2008,30(2):36-37,41. ZHAI Huiying,YANG Jin,ZHOU Jianliang,et al.Analysis and research of cementing strength tests between water isolation tube and soil[J].Oil Drilling Production Technology,2008,30(2):36-37,41.
    • Related Articles

  • Related Articles

    [1]WU Jiang, LI Yanjun, ZHANG Wandong, YANG Yuhao. Key Drilling Techniques of HTHP Horizontal Wells in Mid-Deep Strata of the Yinggehai Basin, South China Sea[J]. Petroleum Drilling Techniques, 2020, 48(2): 63-69. DOI: 10.11911/syztjs.2019112
    [2]ZHANG Weiguo, DI Mingli, LU Yunhu, ZHANG Jian, DU Xuan. Anti-Sloughing Drilling Fluid Technology for the Paleogene Shale Stratum of the Xijiang Oilfield in the South China Sea[J]. Petroleum Drilling Techniques, 2019, 47(6): 40-47. DOI: 10.11911/syztjs.2019103
    [3]HAN Cheng, HUANG Kaiwen, LUO Ming, LIU Xianyu, DEND Wenbiao. Plugging Technology for HTHP Wells in the Yingqiong Basin of the South China Sea[J]. Petroleum Drilling Techniques, 2019, 47(6): 15-20. DOI: 10.11911/syztjs.2019081
    [4]LIU Zhengli, YAN De. Key Drilling Techniques of Liwan22-1-1 Ultra-Deepwater Well in East of South China Sea[J]. Petroleum Drilling Techniques, 2019, 47(1): 13-19. DOI: 10.11911/syztjs.2019026
    [5]LUO Ming, WU Jiang, CHEN Haodong, XIAO Ping. Ultra-High Temperature High Pressure Drilling Technology for Narrow Safety Density Window Strata in the Western South China[J]. Petroleum Drilling Techniques, 2019, 47(1): 8-12. DOI: 10.11911/syztjs.2019024
    [6]LIN Siyuan, LI Zhong, HUANG Yi, CHEN Haodong, YANG Yuhao, GAO Jiji. Technique for Enhancing the Rate of Penetration through the Application of a New PDC Bit with Rotary Cutters in Deep Formations in the Wenchang Block[J]. Petroleum Drilling Techniques, 2017, 45(6): 65-69. DOI: 10.11911/syztjs.201706012
    [7]XU Youfu, ZHANG Zhongqiang, FANG Hualiang. Well Control Technologies for HTHP Gas Wells in the C Block of the South China Sea[J]. Petroleum Drilling Techniques, 2017, 45(4): 21-26. DOI: 10.11911/syztjs.201704004
    [8]Zeng Chunmin, Wei Longgui, Zhang Chao, Zhang Chong, Liu Xianyu, Huang Liang. Casing Wear Prediction for HTHP Gas Wells in West of South China Sea Oilfield[J]. Petroleum Drilling Techniques, 2015, 43(6): 46-53. DOI: 10.11911/syztjs.201506009
    [9]Sun Baojiang, Zhang Zhennan. Challenges and Countermeasures for the Drilling and Completion of Deepwater Wells in the South China Sea[J]. Petroleum Drilling Techniques, 2015, 43(4): 1-7. DOI: 10.11911/syztjs.201504001
    [10]Liu Zhengli, Ye Jihua, Tian Ruirui, Yan De. Adaptability of Underwater Tamping for Deepwater Drilling Conductor Installation in South China Sea[J]. Petroleum Drilling Techniques, 2014, 42(1): 41-45. DOI: 10.3969/j.issn.1001-0890.2014.01.008

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (20669) PDF downloads (16256) Cited by()
    Related

    Supervisor：SINOPEC GROUP

    Sponsor：Sinopec Research Institute of Petroleum Engineering

    Serial Number：CN 11-1763/TE, ISSN 1001-0890

    Chief Editor： WANG Minsheng

    Vice Chief Editor：LIU Xiushan, ZHOU Shiming, CHEN Zuo, YE Haichao,
    CHEN Huinian

    Address：Sinopec Science and Technology Research Center, No.197 Baisha Road, Changping District, Beijing, China

    Tel：010-56606846, 56606847, 56606848, 56606849, 56606850

    E-mail：syzt@vip.163.com

    Service Account

    Subscription Account

    Video Channel

    QR Code on Taobao

    Wechat QR Code

    Copyright © 2009《Petroleum Drilling Techniques 》 All Rights Reserved.

    京公网安备 11010502036328号 京ICP备17033152号

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return